component
SUL6001S5-12
Public Made by Adomby adom
Suntek Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSUL6001S5-12
Suntek · Linear Voltage Regulators (LDO) · SOT-23-5
SUL6001S5-12 from Suntek, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin of the LDO; recommended 1uF ceramic input capacitor. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Chip enable input that turns the regulator on or off, with an internal pull-down resistor shown in the block diagram. |
| 4 | NC | unconnected | No connect pin on the fixed-mode SOT-23-5 version (ADJ pin on the adjustable version). |
| 5 | VOUT | power_out | Regulated output pin; recommended 1uF ceramic output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
SUL6001S5-12 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sul6001s5-12-etched.step/sul6001s5-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sul6001s5-12.step/sul6001s5-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (41 pp, sha256
b53ee9dbcdfc2b89, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).