Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NSVBC848CLT1G

onsemi · Bipolar Transistors - BJT · SOT-23

NSVBC848CLT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base terminal of the NPN transistor; the datasheet gives no pin-specific limit, so the device-level ratings apply (BC848 group: IC 100 mA continuous, VEBO 5.0 V).
2 EMITTER passive Emitter terminal of the NPN transistor; the BC848 group emitter-base breakdown is specified at V(BR)EBO of 5.0 V minimum and the absolute maximum VEBO is 5.0 V.
3 COLLECTOR passive Collector terminal of the NPN transistor; the BC848 group is rated VCEO 30 V and VCBO 30 V with 100 mA maximum continuous collector current.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Emitter Breakdown Voltage (BC848) V(BR)CEO 30 V IC = 10 mA 2
Collector-Emitter Breakdown Voltage (BC848, VEB = 0) V(BR)CES 30 V IC = 10 A, VEB = 0 2
Collector-Base Breakdown Voltage (BC848) V(BR)CBO 30 V IC = 10 A 2
Emitter-Base Breakdown Voltage (BC848) V(BR)EBO 5 V IE = 1.0 A 2
Collector Cutoff Current ICBO 15 nA VCB = 30 V 2
Collector Cutoff Current (TA = 150 C) ICBO 5 A VCB = 30 V, TA = 150°C 2
DC Current Gain (BC848C) hFE 270 520 IC = 10 A, VCE = 5.0 V 2
DC Current Gain (BC848C) hFE 420 800 IC = 2.0 mA, VCE = 5.0 V 2
Collector-Emitter Saturation Voltage VCE(sat) 0.25 V IC = 10 mA, IB = 0.5 mA 2
Collector-Emitter Saturation Voltage VCE(sat) 0.6 V IC = 100 mA, IB = 5.0 mA 2
Base-Emitter Saturation Voltage VBE(sat) 0.7 V IC = 10 mA, IB = 0.5 mA 2
Base-Emitter Saturation Voltage VBE(sat) 0.9 V IC = 100 mA, IB = 5.0 mA 2
Base-Emitter Voltage VBE(on) 580 660 mV IC = 2.0 mA, VCE = 5.0 V 2
Base-Emitter Voltage VBE(on) 700 770 mV IC = 10 mA, VCE = 5.0 V 2
Current-Gain - Bandwidth Product fT 100 MHz IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz 2
Output Capacitance Cobo 4.5 pF VCB = 10 V, f = 1.0 MHz 2
Noise Figure (BC848C) NF 10 dB IC = 0.2 mA, VCE = 5.0 Vdc, RS = 2.0 k, f = 1.0 kHz, BW = 200 Hz 2
Collector-Emitter Voltage (BC848) VCEO 30 Vdc 1
Collector-Base Voltage (BC848) VCBO 30 Vdc 1
Emitter-Base Voltage (BC848) VEBO 5 Vdc 1
Collector Current - Continuous IC 100 mAdc 1
Junction and Storage Temperature Range TJ, Tstg -55 150 °C 1
Total Device Dissipation (FR-5 Board) PD 225 mW FR-5 board (Note 1), TA = 25°C 1
Thermal Resistance, Junction-to-Ambient (FR-5 Board) RJA 556 °C/W FR-5 board (Note 1) 1
Total Device Dissipation (Alumina Substrate) PD 300 mW Alumina substrate (Note 2), TA = 25°C 1
Thermal Resistance, Junction-to-Ambient (Alumina Substrate) RJA 417 °C/W Alumina substrate (Note 2) 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: NSVBC848CLT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: nsvbc848clt1g-etched.step / nsvbc848clt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsvbc848clt1g.step / nsvbc848clt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 b404625d3f566eca, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF