Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC59283DBQR

Texas Instruments · LED Drivers · SSOP-24-150mil

TLC59283DBQR from Texas Instruments, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply ground.
2 SIN input Serial data input for driver switch control; Schmitt buffer input, set logic high to shift '1' into shift register LSB or logic low to shift '0' on SCLK rising edge.
3 SCLK input Serial clock input; Schmitt buffer input, all data in 16-bit shift register shifted one bit toward MSB on each rising edge.
4 LAT input Latch input; Schmitt buffer input, when high shift register data continuously transfers to output latch, when low output latch data held, internally pulled down to GND through 500kΩ resistor.
5 OUT0 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
6 OUT1 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
7 OUT2 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
8 OUT3 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
9 OUT4 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
10 OUT5 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
11 OUT6 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
12 OUT7 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
13 OUT8 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
14 OUT9 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
15 OUT10 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
16 OUT11 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
17 OUT12 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
18 OUT13 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
19 OUT14 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
20 OUT15 output Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor.
21 BLANK input Blanking control; Schmitt buffer input, when high forces all constant-current outputs off and enables all pre-charge FETs, when low outputs controlled by latch data, internally pulled up to VCC through 500kΩ resistor.
22 SOUT output Serial data output connected to 16-bit shift register MSB; output data transitions on SCLK rising edge.
23 IREF input Reference current input; external resistor connected between IREF and GND sets constant output current for all 16 outputs.
24 VCC power_in Power supply voltage input, 3.0V to 5.5V operating range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-24-150mil
Category LED Drivers
Pins 24

CAD (KiCad official)

  • Symbol: TLC59283DBQR
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24-150mil (KiCad packages3D, STEP)
  • 3D model files: tlc59283dbqr-etched.step / tlc59283dbqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc59283dbqr.step / tlc59283dbqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 98e3aee5cb12a4d5, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF