3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90380LGO-BAB-105-RE
Melexis · Position Sensors · TSSOP-16
MLX90380LGO-BAB-105-RE from Melexis, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS_A | power_in | Supply ground for Die A; connect to ground. |
| 2 | NC | unconnected | Not used; connect to ground for optimal EMC behavior. |
| 3 | NC | unconnected | Not used; connect to ground for optimal EMC behavior. |
| 4 | TEST_A | passive | Test pin of Die A; connect to ground for optimal EMC behavior. |
| 5 | OUT2_B | output | Analog output SIN of Die B (ratiometric). |
| 6 | VDD5V_B | power_in | 5V supply of Die B (4.5V to 5.5V operating). |
| 7 | VDD3V3_B | power_in | 3.3V supply of Die B (3.135V to 3.6V operating); leave floating in 5V applications. |
| 8 | OUT1_B | output | Analog output COS of Die B (ratiometric). |
| 9 | VSS_B | power_in | Supply ground for Die B; connect to ground. |
| 10 | NC | unconnected | Not used; connect to ground for optimal EMC behavior. |
| 11 | TEST_B | passive | Test pin of Die B; connect to ground for optimal EMC behavior. |
| 12 | NC | unconnected | Not used; connect to ground for optimal EMC behavior. |
| 13 | OUT2_A | output | Analog output SIN of Die A (ratiometric). |
| 14 | VDD5V_A | power_in | 5V supply of Die A (4.5V to 5.5V operating). |
| 15 | VDD3V3_A | power_in | 3.3V supply of Die A (3.135V to 3.6V operating); leave floating in 5V applications. |
| 16 | OUT1_A | output | Analog output COS of Die A (ratiometric). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (5V) | VDD5V | -16 | 24 | V | 13 | ||
| Supply Voltage (3.3V) | VDD3V3 | -0.3 | 7 | V | 13 | ||
| Supply Current | IDD | -10 | 10 | mA | Excluding external load on OUT1&2. | 13 | |
| Negative Output Voltage | VOUT | -0.3 | V | 13 | |||
| Positive Output Voltage (5V Application Diagram) | VOUT | 18 | V | 5V Application Diagram | 13 | ||
| Output Current | IOUT | -20 | 20 | mA | 13 | ||
| Operating Temperature Range | TA | -40 | 150 | °C | 13 | ||
| Maximum Junction Temperature | TJ | 165 | °C | 13 | |||
| Storage Temperature Range | TS | -55 | 165 | °C | 13 | ||
| ESD Sensitivity (HBM) | ESDHBM | 2 | kV | AEC-Q100-002; valid for SOIC-8 | 13 | ||
| ESD HBM TSSOP-16 cross die | ESDHBM | 1.5 | kV | TSSOP-16 cross die ESD limit | 13 | ||
| ESD Sensitivity (CDM) | ESDCDM | 500 | V | AEC-Q100-011 | 13 | ||
| Maximum Flux Density | B | -1 | 1 | T | 13 | ||
| Supply Voltage (operating) | VDD5V | 4.5 | 5 | 5.5 | V | SOIC-8 and TSSOP-16 packages | 13 |
| Supply Current | IDD | 6 | 10 | mA | Excluding external load on OUT1&2; 4.5 ≤ VDD ≤ 5.5 | 13 | |
| Power On Reset Voltage Rising | VPOR_H | 2.9 | 3.4 | 3.9 | V | OUT HiZ operating mode; Application Diagram VDD5V | 14 |
| Power On Reset Voltage Falling | VPOR_L | 2.5 | 3.05 | 3.5 | V | Operating mode OUT HiZ; Application Diagram VDD5V | 14 |
| Programming Voltage (PTC) | MT7V | 6.1 | 6.5 | 7 | V | Rising Entry Level on VDD | 14 |
| Load Current Range | IOUT | -1 | 1 | mA | 14 | ||
| Load Resistance Range | RL | 5 | kΩ | Connected between OUT and GND; Application Diagram VDD5V | 14 | ||
| Load Capacitor Range | CL | 1.5 | 2.2 | 10 | ηF | Connected between OUT and GND | 14 |
| Output Voltage Range | VO | 5 | 95 | %VDD | Linearity better than 1.5% | 14 | |
| Output Voltage Range | VO | 10 | 90 | %VDD | Linearity better than 0.5% | 14 | |
| Output Resistance | ROUT | 25 | Ω | IOUT= ±1mA | 14 | ||
| Power-On Time | tON | 200 | µs | High bandwidth programming; VPOR_H ≤ VDD ≤ VDD5V_Max | 14 | ||
| Chopping Frequency | FCHOP | 0.9 | 1 | 1.1 | MHz | 14 | |
| Output Update Period | TS | 4 | µs | Each field component takes 2µs, measured sequentially | 14 | ||
| Output Noise Voltage | Vnrms | 3.1 | mV | RMS noise, B=0mT, VDD = typical value, S=1 %VDD/mT (50mV/mT at VDD=5V); Low bandwidth programming | 14 | ||
| Nyquist Frequency | Fnyq | 125 | kHz | 14 | |||
| Tracking Delay | 74 | 85.5 | µs | Low bandwidth | 14 | ||
| Full Scale Magnetic Range (programmable) | Bfs | 10 | 70 | mT | 15 | ||
| Magnetic Flux Density | Bz | 140 | mT | 15 | |||
| Sensitivity | S | 0.66 | %VDD/mT | xx5: 60mT magnetic range | 15 | ||
| Sensitivity Accuracy | -5 | 5 | % | X/Y magnetic axis; TA=25°C, VDD=VDDNOM, S=1%VDD/mT | 15 | ||
| Sensitivity Temperature Coefficient | TCS | 1100 | ppm/°C | First Order approximation; NdFeB | 15 | ||
| Sensitivity Temperature Coefficient Drift | TCSdrift | -500 | 500 | ppm/°C | Temperature drift around programmed TCS | 15 | |
| Sensitivity Ratiometry | -2.5 | 2.5 | % / V | 15 | |||
| Linearity | -0.5 | 0.5 | % | VDD=5V, output voltage within [0.5V;4.5V] | 15 | ||
| Linearity | -1.5 | 1.5 | % | VDD=5V, output voltage within [0.25V;4.75V] | 15 | ||
| Sensitivity Mismatch | -5 | 5 | % | X vs. Y, with/without gain adjustment | 15 | ||
| Output Offset Level | VOQ | 47.5 | 50 | 52.5 | %VDD | B=0mT, TA=25°C | 16 |
| Output Offset Temperature Drift | -1.5 | 0 | 1.5 | %VDD | VDD=5V; B=0mT, S=1 %VDD/mT | 16 | |
| Output Offset Ratiometry | -2.5 | 2.5 | % | B=0mT; (dVOQ / VOQ) - (dVDD / VDD); -10% < dVDD/VDD < 10% | 16 | ||
| Magnetic Angular Speed | 0 | 25000 | rpm | 16 | |||
| Total Angular Error without Correction | -10 | 10 | Degree | T=25°C | 16 | ||
| Total Angular Error without Correction | -15 | 15 | Degree | -40°C ≤ T ≤ 150°C | 16 | ||
| Total Angular Error with Dynamic Compensation | -1 | 1 | Degree | 16 |
CAD (KiCad official)
- Symbol:
MLX90380LGO-BAB-105-RE - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mlx90380lgo-bab-105-re-etched.step/mlx90380lgo-bab-105-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90380lgo-bab-105-re.step/mlx90380lgo-bab-105-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (29 pp, sha256
9a8ca3d75b983805, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).