3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownICM7555ESA+
Analog Devices Inc./Maxim Integrated · Timers / Clock Oscillators · SOIC-8
ICM7555ESA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the timer; connect to the negative supply (V- reference for the latchup limit of V- - 0.3V). |
| 2 | TRIGGER | input | Trigger input that sets the output high when below 1/3 V+ (0.29 to 0.34 V+ at 5V) and starts the timing cycle, with input current of 10pA typical at 5V. |
| 3 | OUTPUT | output | CMOS output stage that swings to the supply voltage, sinks 3.2mA with 0.4V max low drop and sources 1.0mA to 2.0mA, driving at least two TTL loads at 4.5V or greater. |
| 4 | RESET | input | Active-low reset with a trip voltage of 0.4V to 1.0V (0.7V typical) that dominates all other inputs and controls only the internal flip-flop, with extremely high input impedance. |
| 5 | CONTROL VOLTAGE | input | Control voltage input that sets the THRESHOLD and TRIGGER comparator trip points (0.66 V+ typical at 5V), usable for frequency modulation, and needs no decoupling capacitor. |
| 6 | THRESHOLD | input | Threshold comparator input that drives the output low and turns on the discharge switch when above 2/3 V+ (0.63 to 0.67 V+ at 5V), with 10pA typical input current at 5V. |
| 7 | DISCHARGE | passive | Open discharge switch output that discharges the external timing capacitor when the output is low, with 0.1V typical (0.4V max) drop at 3.2mA and 5V supply. |
| 8 | V+ | power_in | Positive supply pin with a 2V to 18V operating range (2V to 16.5V in the Maxim Advantage specification) and an 18V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | V+ | 2 | 18 | V | -20°C ≤ TA ≤ +70°C | 2 | |
| Supply Voltage | V+ | 3 | 16 | V | -55°C ≤ TA ≤ +125°C | 2 | |
| Supply Current (ICM7555) | I+ | 60 | 200 | µA | V+ = 2V | 2 | |
| Supply Current (ICM7555) | I+ | 120 | 300 | µA | V+ = 18V | 2 | |
| Initial Accuracy (timing error) | 2 | 5 | % | RA, RB = 1kΩ to 100kΩ, C = 0.1µF, 5V ≤ V+ ≤ 15V | 2 | ||
| Drift with Supply Voltage | 1 | 3 | %/V | V+ = 5V | 2 | ||
| Threshold Voltage | VTH | 0.63 | 0.66 | 0.67 | V+ | V+ = 5V | 2 |
| Trigger Voltage | VTRIG | 0.29 | 0.33 | 0.34 | V+ | V+ = 5V | 2 |
| Reset Voltage | VRST | 0.4 | 0.7 | 1 | V | V+ = 18V | 3 |
| Control Voltage Lead | VCV | 0.62 | 0.66 | 0.67 | V | V+ = 5V | 3 |
| Output Voltage Drop, Output Low | VO | 0.1 | 0.4 | V | V+ = 18V, ISINK = 3.2mA | 3 | |
| Output Voltage Drop, Output Low | VO | 0.15 | 0.4 | V | V+ = 5V, ISINK = 3.2mA | 3 | |
| Output Voltage, Output High | VO | 17.25 | 17.8 | V | V+ = 18V, ISOURCE = 1.0mA | 3 | |
| Output Voltage, Output High | VO | 4 | 4.5 | V | V+ = 5V, ISOURCE = 1.0mA | 3 | |
| Rise Time of Output | tr | 35 | 40 | 75 | ns | RL = 10MΩ, CL = 10pF, V+ = 5V | 3 |
| Fall Time of Output | tf | 35 | 40 | 75 | ns | RL = 10MΩ, CL = 10pF, V+ = 5V | 3 |
| Guaranteed Max Oscillator Frequency | fmax | 500 | kHz | Astable operation | 3 | ||
| Supply Voltage (absolute maximum) | V+ | 18 | V | 2 | |||
| Output Current | 100 | mA | 2 | ||||
| Power Dissipation (ICM7555) | 200 | mW | ICM7555; see Note 2 for derating | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 60s | 2 | |||
| Operating Temperature Range (ICM7555ESA) | TA | -40 | 85 | °C | ICM7555ESA, 8-pin SO, per ordering table | 1 | |
| Junction Temperature | TJ | 135 | °C | Note 2: junction temperature should not exceed | 2 | ||
| Power Dissipation at +125°C | 20 | mW | at +125°C, Note 2 | 2 | |||
| Power Dissipation Derating (ICM7555) | 2 | mW/°C | approximate, ICM7555, Note 2 | 2 |
CAD (KiCad official)
- Symbol:
ICM7555ESA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
icm7555esa-etched.step/icm7555esa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icm7555esa.step/icm7555esa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (11 pp, sha256
30fd218015c11427, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).