Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16LF1828T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil

PIC16LF1828T-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; 1.8V-3.6V operation for PIC16LF1828.
2 RA5 bidirectional General purpose I/O (RA5) multiplexed with CLKIN, OSC1, T1OSI, T1CKI, P2A and CCP2, with interrupt-on-change and weak pull-up.
3 RA4 bidirectional General purpose I/O (RA4) multiplexed with AN3, CPS3, OSC2, CLKOUT, T1OSO, CLKR, P2B and T1G, with interrupt-on-change and weak pull-up.
4 RA3 input General purpose input only (RA3) multiplexed with T1G, VPP programming voltage and MCLR master clear with internal pull-up.
5 RC5 bidirectional General purpose I/O (RC5) multiplexed with P1A, CCP1, RX, DT and MDCIN2.
6 RC4 bidirectional General purpose I/O (RC4) multiplexed with C2OUT, SRNQ, P1B, TX, CK and MDOUT.
7 RC3 bidirectional General purpose I/O (RC3) multiplexed with AN7, CPS7, C12IN3-, P2A, CCP2, P1C and MDMIN.
8 RC6 bidirectional General purpose I/O (RC6) multiplexed with AN8, CPS8, CCP4 and SS slave select input.
9 RC7 bidirectional General purpose I/O (RC7) multiplexed with AN9, CPS9 and SDO SPI data output.
10 RB7 bidirectional General purpose I/O (RB7) multiplexed with TX and CK of the EUSART, with interrupt-on-change.
11 RB6 bidirectional General purpose I/O (RB6) multiplexed with SCL1 I2C clock and SCK1 SPI clock, with interrupt-on-change.
12 RB5 bidirectional General purpose I/O (RB5) multiplexed with AN11, CPS11, RX and DT, with interrupt-on-change.
13 RB4 bidirectional General purpose I/O (RB4) multiplexed with AN10, CPS10, SDA1 I2C data and SDI1 SPI data input, with interrupt-on-change.
14 RC2 bidirectional General purpose I/O (RC2) multiplexed with AN6, CPS6, C12IN2-, P1D, P2B and MDCIN1.
15 RC1 bidirectional General purpose I/O (RC1) multiplexed with AN5, CPS5, C12IN1- and P1C.
16 RC0 bidirectional General purpose I/O (RC0) multiplexed with AN4, CPS4, C2IN+ and P1D.
17 RA2 bidirectional General purpose I/O (RA2) multiplexed with AN2, CPS2, T0CKI, INT, C1OUT, SRQ, CCP3 and FLT0.
18 RA1 bidirectional General purpose I/O (RA1) multiplexed with AN1, CPS1, C12IN0-, VREF+, SRI, and ICSPCLK serial programming clock/ICDCLK debug clock.
19 RA0 bidirectional General purpose I/O (RA0) multiplexed with AN0, CPS0, C1IN+, VREF-, DACOUT, and ICSPDAT/ICDDAT programming and debug data I/O.
20 VSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-20-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 1.8 3.6 V PIC16LF1824/8, FOSC ≤ 16 MHz 341
Supply Voltage VDD 2.5 3.6 V PIC16LF1824/8, FOSC ≤ 32 MHz (Note 2) 341
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode, PIC16LF1824/8 341
Fixed Voltage Reference Voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 341
Fixed Voltage Reference Voltage for Comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 341
VDD Rise Rate to ensure internal POR SVDD 0.05 V/ms See Section 7.1 341
Power-on Reset Release Voltage VPOR 1.6 V 341
Power-on Reset Rearm Voltage VPORR 0.8 V Device in Sleep mode, PIC16LF1824/8 341
Supply Current, LP mode 32 kHz IDD 5 10 µA VDD = 1.8V, FOSC = 32 kHz LP Oscillator mode, -40°C ≤ TA ≤ +85°C 343
Supply Current, LP mode 32 kHz IDD 7.5 12 µA VDD = 3.0V, FOSC = 32 kHz LP Oscillator mode, -40°C ≤ TA ≤ +85°C 343
Supply Current, XT mode 1 MHz IDD 88 110 µA VDD = 1.8V, FOSC = 1 MHz XT Oscillator mode 343
Supply Current, XT mode 4 MHz IDD 220 290 µA VDD = 1.8V, FOSC = 4 MHz XT Oscillator mode 343
Supply Current, HFINTOSC 16 MHz IDD 0.7 1.2 mA VDD = 1.8V, FOSC = 16 MHz HFINTOSC mode 344
Supply Current, HFINTOSC 32 MHz IDD 3.2 3.6 mA VDD = 3.6V, FOSC = 32 MHz HFINTOSC mode (Note 3) 344
Power-down Base Current IPD 0.02 1 µA VDD = 1.8V, WDT, BOR, FVR, T1OSC disabled, max at +85°C (2.4 at +125°C) 346
Power-down Base Current IPD 0.03 1.5 µA VDD = 3.0V, WDT, BOR, FVR, T1OSC disabled, max at +85°C (3.0 at +125°C) 346
Input Low Voltage, TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 348
Input Low Voltage, SMBus levels VIL 0.8 V 2.7V ≤ VDD ≤ 5.5V 348
Input High Voltage, SMBus levels VIH 2.1 V 2.7V ≤ VDD ≤ 5.5V 348
Input Leakage Current, I/O ports IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance at 85°C (typ ± 5) 348
Input Leakage Current, I/O ports IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance at 125°C 348
Input Leakage Current, MCLR IIL -200 200 nA VSS ≤ VPIN ≤ VDD at 85°C (typ ± 50) 348
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 348
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V 348
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 348
All I/O pins capacitive loading CIO 50 pF 348
Brown-out Reset Voltage VBOR 2.55 2.7 2.85 V BORV = 0 357
Brown-out Reset Voltage VBOR 1.8 1.9 2.05 V BORV = 1 357
Brown-out Reset Hysteresis VHYST 20 35 75 mV -40°C to +85°C 357
Watchdog Timer Time-out Period (No Prescaler) TWDTLP 12 16 20 ms VDD = 3.3V-5V 357
Internal LFINTOSC Frequency Tolerance LFOSC -25 25 % 31 kHz typ, -40°C ≤ TA ≤ +125°C 353
Internal HFINTOSC Frequency Tolerance HFOSC -2 2 % 16.0 MHz typ, 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V 353
Ambient temperature under bias -40 125 °C 338
Storage temperature -65 150 °C 338
Voltage on VDD with respect to VSS VDD -0.3 4 V PIC16LF1824/8 338
Voltage on MCLR with respect to VSS -0.3 9 V 338
Maximum current out of VSS pin 210 mA -40°C ≤ TA ≤ +85°C for industrial 338
Maximum current into VDD pin 170 mA -40°C ≤ TA ≤ +85°C for industrial 338
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 338
Operating temperature (industrial) TA -40 85 °C Industrial 341
Thermal Resistance Junction to Ambient θJA 87.3 °C/W 20-pin SSOP package 350
Thermal Resistance Junction to Case θJC 31.1 °C/W 20-pin SSOP package 350
Maximum Junction Temperature TJMAX 150 °C 350

CAD (KiCad official)

  • Symbol: PIC16LF1828T-I
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf1828t-i-etched.step / pic16lf1828t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1828t-i.step / pic16lf1828t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (441 pp, sha256 10baf2855904f668, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF