3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHC-1.25-5PLT-L
HCTL · Wire To Board Connector · Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical
HC-1.25-5PLT-L from HCTL, in a Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current | 1 | A | AC, DC | 19 | |||
| Rated voltage | 125 | V | AC, DC | 19 | |||
| Operating temperature range | -40 | 105 | ℃ | 19 | |||
| Contact resistance (initial) | 20 | mΩ | Max test 20 mV and 100 mA applied to mated connector; excludes wire resistance | 5 | |||
| Insulation resistance (PLT) | 500 | MΩ | 19 | ||||
| Withstanding voltage | 500 | V AC | 1 minute; no breakdown or flashover | 19 | |||
| Leakage current | 0.5 | mA | 200 V AC (rms) for 1 minute between adjacent terminals and ground of mated connectors | 5 | |||
| Current discontinuity | 1 | µs | During vibration test | 7 | |||
| Contact resistance after vibration | 30 | mΩ | After vibration: 1.5 mm p-p, 10-55 Hz, 2 h per axis | 7 | |||
| Contact resistance after durability | 30 | mΩ | After 30 mating cycles at max 10 cycles/min, before environmental test | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | 85±2℃, 96 hours continuously | 8 | |||
| Temperature rise | 30 | ℃ | At maximum rated current | 8 | |||
| Contact resistance after temperature cycling | 30 | mΩ | 5 cycles, -40±3℃ and 105±3℃, 30 min each | 9 | |||
| Contact resistance after humidity | 30 | mΩ | Relative humidity 90-95%, 96 hours continuously | 9 | |||
| Insulation resistance after humidity | 100 | MΩ | Relative humidity 90-95%, 96 hours continuously | 9 | |||
| Contact resistance after salt spray | 30 | mΩ | Salt spray, 35±3 ℃, 5±1 % solution | 10 | |||
| Single contact insertion force | 3 | N | Housing mated with wafer at 25±3 mm/min | 6 | |||
| Single contact withdrawal force | 0.3 | N | Terminal pulled from hole seat at 25±3 mm/min | 6 | |||
| Seat pull-out force (pin retention) | 4 | N | Pin pulled from seat at 25±3 mm/min | 6 | |||
| Fixed terminal and hole seat force | 8 | N | Terminal pulled from seat along wire direction at 25±3 mm/min | 6 | |||
| Terminal crimp wire strength (AWG #28) | 13 | N | Axial pull at 25±3 mm/min, AWG #28 wire | 6 | |||
| Terminal crimp wire strength (AWG #30) | 8 | N | Axial pull at 25±3 mm/min, AWG #30 wire | 6 | |||
| Terminal crimp wire strength (AWG #32) | 6 | N | Axial pull at 25±3 mm/min, AWG #32 wire | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | 黄铜 | 卧贴针座-PWT 黄铜 厚 0.30mm | 4 |
CAD (KiCad official)
- Symbol:
HC-1.25-5PLT-L - Footprint:
Connector_Molex:Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical - 3D model: Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
- 3D model files:
hc-1-25-5plt-l-etched.step/hc-1-25-5plt-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-1-25-5plt-l.step/hc-1-25-5plt-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (20 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).