component

AD7192BRUZ-REEL

Public Made by Adom

by adom

Analog Devices Analog To Digital Converters (ADC), TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentdata acquisitionad7192bruz-reelfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

AD7192BRUZ-REEL

Analog Devices · Analog To Digital Converters (ADC) · TSSOP-24

AD7192BRUZ-REEL from Analog Devices, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLK1 input External master clock input used as crystal oscillator feedback when external crystal connected between MCLK1 and MCLK2.
2 MCLK2 tri_state Tri-state master clock pin supporting external crystal drive, external clock input, internal 4.92MHz clock output, or tri-state when not used.
3 SCLK input Serial clock input with Schmitt trigger for ADC data transfer; suitable for optically isolated applications.
4 CS input Active-low chip select logic input for selecting ADC on shared serial bus.
5 P3 output General-purpose digital output pin referenced to AVDD-AGND, logic level controlled by P3DAT bit in GPOCON register.
6 P2 output General-purpose digital output pin referenced to AVDD-AGND, logic level controlled by P2DAT bit in GPOCON register.
7 P1/REFIN2(+) tri_state Tri-state general-purpose digital output (controlled by GP10EN) or positive reference input when REFSEL=1; reference voltage range 1V to AVDD.
8 P0/REFIN2(−) tri_state Tri-state general-purpose digital output (controlled by GP10EN) or negative reference input when REFSEL=1; reference voltage range AGND to (AVDD−1V).
9 NC unconnected No connect internal pin; should be connected externally to AGND.
10 AINCOM input Analog input common reference pin for pseudo-differential configuration of AIN1 through AIN4.
11 AIN1 input Analog input pin configurable as positive differential input with AIN2 or pseudo-differential input with AINCOM.
12 AIN2 input Analog input pin configurable as negative differential input with AIN1 or pseudo-differential input with AINCOM.
13 AIN3 input Analog input pin configurable as positive differential input with AIN4 or pseudo-differential input with AINCOM.
14 AIN4 input Analog input pin configurable as negative differential input with AIN3 or pseudo-differential input with AINCOM.
15 REFIN1(+) input Positive reference input pin; voltage range AGND+1V to AVDD; nominal differential reference voltage (REFIN1(+)−REFIN1(−)) is AVDD.
16 REFIN1(−) input Negative reference input pin; voltage range AGND to (AVDD−1V).
17 BPDSW output Bridge shutdown switch output (open-drain type), sinking to AGND with 30mA maximum continuous current when enabled via GPOCON register.
18 AGND power_in Analog ground reference point, internally connected to DGND through substrate.
19 DGND power_in Digital ground reference point, internally connected to AGND through substrate.
20 AVDD power_in Analog power supply voltage 3V to 5.25V, independent from DVDD.
21 DVDD power_in Digital power supply voltage 2.7V to 5.25V, independent from AVDD.
22 SYNC input Synchronization input with internal pull-up to DVDD; resets filter and modulator when low, allows multiple AD7192 device synchronization.
23 DOUT/RDY output Serial data output / data ready indicator pin; outputs serial data on SCLK edges when CS low, goes active-low when conversion complete.
24 DIN input Serial data input for control register access via communication register to configure device and read output data.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSSOP-24
Category Data Acquisition
Pins 24

CAD (KiCad official)

  • Symbol: AD7192BRUZ-REEL
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: ad7192bruz-reel-etched.step / ad7192bruz-reel-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7192bruz-reel.step / ad7192bruz-reel.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (40 pp, sha256 a5a3bd40d4244678, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF