Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM4C1231D5PMIR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

TM4C1231D5PMIR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB6 bidirectional GPIO port B bit 6 with TTL-compatible levels; alternate functions are SSI2Rx (SSI module 2 receive) and T0CCP0 (16/32-bit Timer 0 Capture/Compare/PWM 0).
2 VDDA power_in Positive supply for the analog circuits (ADC, analog comparators); must be supplied within the Table 21-5 voltage specification regardless of system implementation.
3 GNDA power_in Ground reference for the analog circuits (ADC, analog comparators), separated from GND to reduce digital noise coupling.
4 PB7 bidirectional GPIO port B bit 7 with TTL-compatible levels; alternate functions are SSI2Tx (SSI module 2 transmit) and T0CCP1 (16/32-bit Timer 0 Capture/Compare/PWM 1).
5 PF4 bidirectional GPIO port F bit 4 with TTL-compatible levels; alternate function is T2CCP0 (16/32-bit Timer 2 Capture/Compare/PWM 0).
6 PE3 bidirectional GPIO port E bit 3; analog input AIN0 for the ADC, which is not 5-V tolerant and passes through an isolation circuit.
7 PE2 bidirectional GPIO port E bit 2; analog input AIN1 for the ADC, which is not 5-V tolerant and passes through an isolation circuit.
8 PE1 bidirectional GPIO port E bit 1; analog input AIN2 for the ADC (not 5-V tolerant) and alternate function U7Tx (UART module 7 transmit).
9 PE0 bidirectional GPIO port E bit 0; analog input AIN3 for the ADC (not 5-V tolerant) and alternate function U7Rx (UART module 7 receive).
10 PD7 bidirectional GPIO port D bit 7 with TTL-compatible levels; also NMI (non-maskable interrupt), U2Tx (UART 2 transmit) and WT5CCP1 (32/64-bit Wide Timer 5 Capture/Compare/PWM 1); locked and requires commit control to reprogram.
11 VDD power_in Positive supply for I/O and some logic.
12 GND power_in Ground reference for logic and I/O pins.
13 PC7 bidirectional GPIO port C bit 7 with TTL-compatible levels; alternate functions are C0- (analog comparator 0 negative input), U3Tx (UART 3 transmit) and WT1CCP1 (Wide Timer 1 CCP 1).
14 PC6 bidirectional GPIO port C bit 6 with TTL-compatible levels; alternate functions are C0+ (analog comparator 0 positive input), U3Rx (UART 3 receive) and WT1CCP0 (Wide Timer 1 CCP 0).
15 PC5 bidirectional GPIO port C bit 5 with TTL-compatible levels; alternate functions are C1+ (analog comparator 1 positive input), U1CTS, U1Tx, U4Tx and WT0CCP1.
16 PC4 bidirectional GPIO port C bit 4 with TTL-compatible levels; alternate functions are C1- (analog comparator 1 negative input), U1RTS, U1Rx, U4Rx and WT0CCP0.
17 PA0 bidirectional GPIO port A bit 0 with TTL-compatible levels; alternate function U0Rx (UART 0 receive, default function after reset).
18 PA1 bidirectional GPIO port A bit 1 with TTL-compatible levels; alternate function U0Tx (UART 0 transmit, default function after reset).
19 PA2 bidirectional GPIO port A bit 2 with TTL-compatible levels; alternate function SSI0Clk (SSI module 0 clock, default function after reset).
20 PA3 bidirectional GPIO port A bit 3 with TTL-compatible levels; alternate function SSI0Fss (SSI module 0 frame signal, default function after reset).
21 PA4 bidirectional GPIO port A bit 4 with TTL-compatible levels; alternate function SSI0Rx (SSI module 0 receive, default function after reset).
22 PA5 bidirectional GPIO port A bit 5 with TTL-compatible levels; alternate function SSI0Tx (SSI module 0 transmit, default function after reset).
23 PA6 bidirectional GPIO port A bit 6; alternate function I2C1SCL (I2C module 1 clock, open-drain with active pull-up, so the port pin should not be configured as open drain).
24 PA7 bidirectional GPIO port A bit 7 with TTL-compatible levels; alternate function I2C1SDA (I2C module 1 data, open-drain, must be set open drain via GPIOODR).
25 VDDC power_in On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12.
26 VDD power_in Positive supply for I/O and some logic.
27 GND power_in Ground reference for logic and I/O pins.
28 PF0 bidirectional GPIO port F bit 0 (default GPIO, locked and requires commit control); alternate functions include C0o (comparator 0 output), CAN0Rx, NMI, SSI1Rx, T0CCP0, U1RTS.
29 PF1 bidirectional GPIO port F bit 1 with TTL-compatible levels; alternate functions include C1o (comparator 1 output), SSI1Tx, T0CCP1, TRD1 (trace data 1), and U1CTS.
30 PF2 bidirectional GPIO port F bit 2 with TTL-compatible levels; alternate functions include SSI1Clk, T1CCP0 (Timer 1 CCP 0) and TRD0 (trace data 0).
31 PF3 bidirectional GPIO port F bit 3 with TTL-compatible levels; alternate functions include CAN0Tx, SSI1Fss, T1CCP1 (Timer 1 CCP 1) and TRCLK (trace clock).
32 WAKE input External TTL input that brings the processor out of Hibernate mode when asserted.
33 HIB output TTL output that indicates the processor is in Hibernate mode.
34 XOSC0 input Hibernation module oscillator crystal input or external clock reference input (32.768 kHz crystal or oscillator for the Hibernation RTC); analog pin.
35 GNDX power_in Ground for the Hibernation oscillator; connect to digital ground along with the crystal load capacitors (crystal) or to digital ground (external oscillator).
36 XOSC1 output Hibernation module oscillator crystal output; leave unconnected when using a single-ended clock source.
37 VBAT power_in Power source for the Hibernation module, normally connected to the positive terminal of a battery as battery backup supply.
38 RST input System reset input (TTL-compatible).
39 GND power_in Ground reference for logic and I/O pins.
40 OSC0 input Main oscillator crystal input or external clock reference input; analog pin.
41 OSC1 output Main oscillator crystal output; leave unconnected when using a single-ended clock source.
42 VDD power_in Positive supply for I/O and some logic.
43 PD4 bidirectional GPIO port D bit 4; this pin is not 5-V tolerant. Alternate functions are U6Rx (UART 6 receive) and WT4CCP0.
44 PD5 bidirectional GPIO port D bit 5; this pin is not 5-V tolerant. Alternate functions are U6Tx (UART 6 transmit) and WT4CCP1.
45 PB0 bidirectional GPIO port B bit 0; this pin is not 5-V tolerant. Alternate functions are T2CCP0 and U1Rx (UART 1 receive).
46 PB1 bidirectional GPIO port B bit 1; this pin is not 5-V tolerant. Alternate functions are T2CCP1 and U1Tx (UART 1 transmit).
47 PB2 bidirectional GPIO port B bit 2; alternate functions are I2C0SCL (I2C module 0 clock, open-drain with active pull-up) and T3CCP0.
48 PB3 bidirectional GPIO port B bit 3; alternate functions are I2C0SDA (I2C module 0 data, open-drain) and T3CCP1.
49 PC3 bidirectional GPIO port C bit 3 (JTAG/SWD default); alternate functions are SWO and TDO (JTAG TDO/SWO, output) and T5CCP1; commit control protected.
50 PC2 bidirectional GPIO port C bit 2 (JTAG default); alternate functions are TDI (JTAG TDI, input) and T5CCP0; commit control protected.
51 PC1 bidirectional GPIO port C bit 1 (JTAG/SWD default); alternate functions are SWDIO/TMS (JTAG TMS and SWDIO) and T4CCP1; commit control protected.
52 PC0 bidirectional GPIO port C bit 0 (JTAG/SWD default); alternate functions are SWCLK/TCK (JTAG/SWD clock input) and T4CCP0; commit control protected.
53 PD6 bidirectional GPIO port D bit 6 with TTL-compatible levels; alternate functions are U2Rx (UART 2 receive) and WT5CCP0.
54 VDD power_in Positive supply for I/O and some logic.
55 GND power_in Ground reference for logic and I/O pins.
56 VDDC power_in On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12.
57 PB5 bidirectional GPIO port B bit 5 with TTL-compatible levels; alternate functions are AIN11 (ADC input 11), CAN0Tx, SSI2Fss, and T1CCP1.
58 PB4 bidirectional GPIO port B bit 4 with TTL-compatible levels; alternate functions are AIN10 (ADC input 10), CAN0Rx, SSI2Clk, and T1CCP0.
59 PE4 bidirectional GPIO port E bit 4 with TTL-compatible levels; alternate functions are AIN9 (ADC input 9), CAN0Rx, I2C2SCL (open-drain with active pull-up), and U5Rx.
60 PE5 bidirectional GPIO port E bit 5 with TTL-compatible levels; alternate functions are AIN8 (ADC input 8), CAN0Tx, I2C2SDA (open-drain), and U5Tx.
61 PD0 bidirectional GPIO port D bit 0 with TTL-compatible levels; alternate functions are AIN7, SSI3Clk, SSI1Clk, I2C3SCL (open-drain with active pull-up), and WT2CCP0.
62 PD1 bidirectional GPIO port D bit 1 with TTL-compatible levels; alternate functions are AIN6, SSI3Fss, SSI1Fss, I2C3SDA (open-drain), and WT2CCP1.
63 PD2 bidirectional GPIO port D bit 2 with TTL-compatible levels; alternate functions are AIN5, SSI3Rx, SSI1Rx, and WT3CCP0.
64 PD3 bidirectional GPIO port D bit 3 with TTL-compatible levels; alternate functions are AIN4, SSI3Tx, SSI1Tx, and WT3CCP1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

CAD (KiCad official)

  • Symbol: TM4C1231D5PMIR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: tm4c1231d5pmir-etched.step / tm4c1231d5pmir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm4c1231d5pmir.step / tm4c1231d5pmir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (1149 pp, sha256 209599ee3de8e332, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF