component
MIC5319-3.3YD5-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5319-3.3YD5-TR
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5
MIC5319-3.3YD5-TR from Microchip Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input; the datasheet specifies an input voltage range of 2.5V to 5.5V (absolute maximum 6V). |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Active-high enable input: High = ON, Low = OFF; must not be left floating, with VIL ≤ 0.2V and VIH ≥ 1.2V. |
| 4 | BYP | passive | Reference bypass: connect an external 0.1µF capacitor to GND for reduced output noise; may be left open. |
| 5 | VOUT | power_out | Regulated output voltage; the datasheet requires an output capacitor of 2.2µF or greater (low-ESR ceramic) for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (variation from nominal VOUT) | VOUT | -1 | 1 | % | 4 | ||
| Output Voltage Accuracy (variation from nominal VOUT, load range) | VOUT | -2 | 2 | % | IOUT = 100mA to 500mA | 4 | |
| Line Regulation | 0.04 | 0.3 | %/V | VIN = VOUT +1V to 5.5V | 4 | ||
| Load Regulation | 0.1 | 0.5 | % | IOUT = 100µA to 500mA | 4 | ||
| Dropout Voltage | 20 | 40 | mV | IOUT = 50mA | 4 | ||
| Dropout Voltage | 200 | 400 | mV | IOUT = 500mA | 4 | ||
| Ground Pin Current | 90 | 150 | µA | IOUT = 0 to 500mA | 4 | ||
| Ground Pin Current in Shutdown | 0.5 | µA | VEN ≤ 0.2V | 4 | |||
| Current Limit | 600 | 700 | mA | VOUT = 0V | 4 | ||
| Turn-On Time | 40 | 100 | µs | COUT = 2.2µF; CBYP = 0.1 µF | 4 | ||
| Enable Input Voltage Logic Low (Regulator Shutdown) | VIL | 0.2 | V | 4 | |||
| Enable Input Voltage Logic High (Regulator Enabled) | VIH | 1.2 | V | 4 | |||
| Enable Input Current | IEN | 0.01 | 1 | µA | VIL = ≤ 0.2V (Regulator Shutdown) | 4 | |
| Supply Input Voltage (operating) | VIN | 2.5 | 5.5 | V | 4 | ||
| Enable Input Voltage (operating) | VEN | 0 | V | maximum is VIN | 4 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 4 | ||
| Supply Input Voltage (absolute maximum) | VIN | 0 | 6 | V | 4 | ||
| Enable Input Voltage (absolute maximum) | VEN | 0 | 6 | V | 4 | ||
| Junction Temperature (absolute maximum) | TJ | -40 | 125 | °C | 4 | ||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| Lead Temperature | 260 | °C | soldering, 5 sec | 4 | |||
| ESD Rating | 3 | kV | Human body model | 4 |
CAD (KiCad official)
- Symbol:
MIC5319-3.3YD5-TR - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5319-3-3yd5-tr-etched.step/mic5319-3-3yd5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5319-3-3yd5-tr.step/mic5319-3-3yd5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (13 pp, sha256
1ab354a5389ef4be, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).