component
ETA5053V120DF1E
Public Made by Adomby adom
etasolution Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN1x1-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownETA5053V120DF1E
etasolution · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN1x1-4
ETA5053V120DF1E from etasolution, in a DFN1x1-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output of the regulator, rated for a continuous output current of 300mA with an output voltage range of 0.8V to 3.95V in 50mV steps. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | EN | input | Enable pin: drive high to enable the IC and low to disable it, with logic low at or below 0.4V and logic high at or above 1.4V for 1.8V ≤ VIN ≤ 6V; EN can be connected to VIN if not used. |
| 4 | VIN | power_in | Input supply pin, with an input voltage range of 1.6V to 6.0V and an absolute maximum of 6V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | DFN1x1-4 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
ETA5053V120DF1E - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN1x1-4 (KiCad packages3D, STEP)
- 3D model files:
eta5053v120df1e-etched.step/eta5053v120df1e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eta5053v120df1e.step/eta5053v120df1e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: etasolution datasheet (13 pp, sha256
0ecaa0a47ee055dc, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).