component
RS0101YC6
Public Made by Adomby adom
Jiangsu RUNIC Tech Translators, Level Shifters, SOT-363-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS0101YC6
Jiangsu RUNIC Tech · Translators, Level Shifters · SOT-363-6
RS0101YC6 from Jiangsu RUNIC Tech, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCA | power_in | A port supply voltage, which must satisfy 1.65V ≤ VCCA ≤ 5.5V and VCCA ≤ VCCB. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | A | bidirectional | Input/output A, referenced to VCCA. |
| 4 | B | bidirectional | Input/output B, referenced to VCCB. |
| 5 | OE | input | Output enable (active high); pulling OE low places all outputs in 3-state mode, and it is referenced to VCCA. |
| 6 | VCCB | power_in | B port supply voltage, which must satisfy 2.3V ≤ VCCB ≤ 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-363-6 |
| Category | Logic |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCCA supply voltage range | VCCA | -0.3 | 6 | V | 4 | ||
| VCCB supply voltage range | VCCB | -0.3 | 6 | V | 4 | ||
| Input voltage range | VI | -0.3 | 6 | V | A port | 4 | |
| Voltage range applied to any output in the high-impedance or power-off state | VO | -0.3 | 6 | V | A port | 4 | |
| Voltage range applied to any output in the high or low state (max printed as VCCA+0.3) | VO | -0.3 | V | A port | 4 | ||
| Voltage range applied to any output in the high or low state (max printed as VCCB+0.3) | VO | -0.3 | V | B port | 4 | ||
| Input clamp current | IIK | -50 | mA | VI<0 | 4 | ||
| Output clamp current | IOK | -50 | mA | Vo<0 | 4 | ||
| Continuous output current | IO | -50 | 50 | mA | 4 | ||
| Continuous current through VCCA, VCCB or GND | -100 | 100 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human-body model (HBM) ESD rating | V(ESD) | -5000 | 5000 | V | Human-body model (HBM) | 4 | |
| Electrostatic discharge, machine model (MM) ESD rating | V(ESD) | -400 | 400 | V | Machine Model (MM) | 4 | |
| Supply voltage VCCA | VCCA | 1.65 | 5.5 | V | VCCA must be less than or equal to VCCB | 6 | |
| Supply voltage VCCB | VCCB | 2.3 | 5.5 | V | 6 | ||
| High-level input voltage (VIH) OE input (min printed as VCCA × 0.8) | VIH | 5.5 | V | VCCA = 1.65 V to 3.6 V; VCCB = 2.3 V to 5.5 V | 6 | ||
| Low-level input voltage (VIL) A-port I/Os | VIL | 0 | 0.15 | V | VCCA = 1.65 V to 3.6 V; VCCB = 2.3 V to 5.5 V | 6 | |
| Low-level input voltage (VIL) B-port I/Os | VIL | 0 | 0.15 | V | VCCA = 1.65 V to 3.6 V; VCCB = 2.3 V to 5.5 V | 6 | |
| Low-level input voltage (VIL) OE input (max printed as VCCA × 0.25) | VIL | 0 | V | VCCA = 1.65 V to 3.6 V; VCCB = 2.3 V to 5.5 V | 6 | ||
| Input transition rise or fall rate (Δt/Δv) A-port I/Os | Δt/Δv | 10 | ns/V | push-pull driving | 6 | ||
| Input transition rise or fall rate (Δt/Δv) B-port I/Os | Δt/Δv | 10 | ns/V | push-pull driving | 6 | ||
| Input transition rise or fall rate (Δt/Δv) control input | Δt/Δv | 10 | ns/V | 6 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 6 | ||
| Port A output high voltage (min printed as VCCA × 0.7) | VOHA | 5.5 | V | IOH = -20 μA; VIB ≥ VCCB, 0.4V; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | ||
| Port A output low voltage | VOLA | 0.3 | V | IOL = 1mA; VIB ≤ 0.15 V; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | ||
| Port B output low voltage | VOLB | 0.3 | V | IOL = 1mA; VIA ≤ 0.15 V; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | ||
| Input leakage current OE | II | -0.5 | 0.5 | µA | OE; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; +25C | 7 | |
| Input leakage current OE | II | -1.5 | 1.5 | µA | OE; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | |
| Partial power down current A ports | Ioff | -0.5 | 0.5 | µA | A ports; VCCA 0V; VCCB 0V to 5.5V; +25C | 7 | |
| Partial power down current A ports | Ioff | -1 | 1 | µA | A ports; VCCA 0V; VCCB 0V to 5.5V; Full | 7 | |
| Partial power down current B ports | Ioff | -0.5 | 0.5 | µA | B ports; VCCA 0V to 5.5V; VCCB 0V; +25C | 7 | |
| Partial power down current B ports | Ioff | -1 | 1 | µA | B ports; VCCA 0V to 5.5V; VCCB 0V; Full | 7 | |
| High-impedance state output current | IOZ | -0.5 | 0.5 | µA | A or B port; OE=0V; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; +25C | 7 | |
| High-impedance state output current | IOZ | -1 | 1 | µA | A or B port; OE=0V; VCCA 1.65V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | |
| VCCA supply current | ICCA | 2.5 | µA | VI = VO = open; IO = 0; VCCA 1.65V to VCCB; VCCB 2.3V to 5.5V; Full | 7 | ||
| VCCA supply current | ICCA | -1 | µA | VI = VO = open; IO = 0; VCCA 0V; VCCB 5.5V; Full | 7 | ||
| VCCB supply current | ICCB | 10 | µA | VI = VO = open; IO = 0; VCCA 1.65V to VCCB; VCCB 2.3V to 5.5V; Full | 7 | ||
| VCCB supply current | ICCB | -1 | µA | VI = VO = open; IO = 0; VCCA 5.5V; VCCB 0V; Full | 7 | ||
| VCCB supply current | ICCB | 1 | µA | VI = VO = open; IO = 0; VCCA 0V; VCCB 5.5V; Full | 7 | ||
| Combined supply current | ICCA+ICCB | 11 | µA | VI = VCCI or GND; IO = 0; VCCA 1.65V to VCCB; VCCB 2.3V to 5.5V; Full | 7 | ||
| VCCA supply current in high-impedance (OE low) | ICCZA | 1 | µA | VI = VCCI or 0V; IO = 0, OE=0V; VCCA 1.65V to VCCB; VCCB 2.3V to 5.5V; Full | 7 | ||
| VCCB supply current in high-impedance (OE low) | ICCZB | 1 | µA | VI = VCCI or 0V; IO = 0, OE=0V; VCCA 2.3V to 5.5V; VCCB 2.3V to 5.5V; Full | 7 | ||
| Input capacitance OE | CI | 2.5 | pF | OE; VCCA 3.3V; VCCB 3.3V; +25C | 7 | ||
| Input-to-output internal capacitance A port | CIO | 5 | pF | A port; VCCA 3.3V; VCCB 3.3V; +25C | 7 | ||
| Input-to-output internal capacitance B port | CIO | 5 | pF | B port; VCCA 3.3V; VCCB 3.3V; +25C | 7 |
CAD (KiCad official)
- Symbol:
RS0101YC6 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363-6 (KiCad packages3D, STEP)
- 3D model files:
rs0101yc6-etched.step/rs0101yc6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs0101yc6.step/rs0101yc6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (20 pp, sha256
6a7b0d47bd5e5269, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).