component

HX3082-S

Public Made by Adom

by adom

ZHHXDZ RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfacehx3082-sfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX3082-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX3082-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output: driven high when A-B is at or above -50 mV, driven low when A-B is at or below -200 mV, and high for open-circuit or short-circuit receiver inputs (fail-safe).
2 RE input Receiver enable input: the receiver is active when RE is low, and RO is high impedance when RE is high.
3 DE input Driver enable input: high enables the driver outputs A and B, and low puts A and B into high impedance.
4 DI input Driver data input: with DE high, A goes high and B goes low when DI is high, and the reverse when DI is low.
5 GND power_in Ground reference; all voltages are referenced to this pin.
6 A bidirectional Driver differential output (non-inverting) and receiver differential input, with ±15 kV HBM ESD protection between A and B.
7 B bidirectional Driver differential output (inverting) and receiver differential input, with ±15 kV HBM ESD protection between A and B.
8 Vcc power_in Power supply, working voltage range 4.5 V to 5.5 V (5 V ±5%).

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Working voltage range Vcc 4.5 5.5 V Vcc=5V±5%, TA=25°C 2
Driver differential output (no load) VOD1 5 V No load 2
Driver differential output (with load) VOD2 1.5 V R=54Ω or R=27Ω, Figure 1 2
Change in magnitude of driver differential output when DI changes ∆VOD 0.2 V 2
Driver common-mode output voltage VOC 1 3 V 2
Change in magnitude of driver common-mode output voltage when DI changes ∆VOC 0.2 V 2
Input high voltage VIH 2 V DE,RE,DI 2
Input low voltage VIL 0.8 V DE,RE,DI 2
Input current IIN1 -2 2 uA DE,RE,DI 2
Input current (A, B) IIN2 40 90 uA DE=0V, Vcc=5V, VIN=5V 2
Input current (A, B) IIN2 60 100 uA DE=0V, Vcc=5V, VIN=0V 2
Receiver differential input threshold voltage VTH -200 -50 mV -7V ≤ VCM ≤ +12V 2
Receiver differential input threshold voltage hysteresis ∆VTH 25 mV 2
Receiver output high level VOH 4 V IO=-8mA 2
Receiver output low level VOL 0.4 V IO=8mA 2
Receiver output off-state (high-impedance) current IOZR 1 uA 0.4V ≤ Vo ≤ 2.4V 2
Receiver input resistance RIN 96 kΩ 2
No load operating current ICC 480 600 uA RE=DI=GND or DE=Vcc 2
Operating current with driver disabled ICC 450 600 uA DE=GND 2
Receiver output short-circuit current IOSR 95 mA 0V ≤ VRO ≤ Vcc 2
ESD protection (human body model) -15 15 kV Between A/B, human body model 2
Driver output short-circuit current IOD 100 mA Short circuit current between A/B 2
Drive input to output propagation delay (low to high) tDPLH 250 1000 ns RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Drive input to output propagation delay (high to low) tDPHL 250 1000 ns RDIFF=50Ω, CL1=CL2=100pF, Figure 3,5 2
Driver output offset /tDPLH, tDPHL/ tDSKEW -100 100 ns RDIFF=50Ω, CL1=CL2=100pF 2
Drive up time tDR 200 750 ns RDIFF=50Ω, CL1=CL2=100pF 2
Drive down time tDF 200 750 ns RDIFF=50Ω, CL1=CL2=100pF 2
Driver enables high output tDZH 2500 ns CL=100pF, Figure 4,6, S2 closed 2
Driver enables output to be low tDZL 2500 ns CL=100pF, Figure 4,6, S1 closed 2
Drive from low to off tDLZ 100 ns CL=15pF, Figure 4,6, S1 closed 2
Drive from high to off tDHZ 100 ns CL=15pF, Figure 4,6, S2 closed 2
Receiver input to output propagation delay (low to high) tRPLH 200 ns /VID/ ≥ 2.0V, rise/fall time ≤ 15ns, Figure 7,9 2
Receiver input to output propagation delay (high to low) tRPHL 200 ns /VID/ ≥ 2.0V, rise/fall time ≤ 15ns, Figure 7,9 2
Differential receiver offset /tRPLH, tRPHL/ tRSKEW -30 30 ns 2
Receiver enable to output low tRZL 20 50 ns CL=100pF, Figure 2,8, S1 closed 2
Receiver enable to output high tRZH 20 50 ns CL=100pF, Figure 2,8, S2 closed 2
Receiver from low to off tRLZ 20 50 ns CL=100pF, Figure 2,8, S1 closed 2
Receiver from high to off tRHZ 20 50 ns CL=100pF, Figure 2,8, S2 closed 2
Supply voltage VCC -0.3 6 V 2
Control input voltage DE,RE -0.3 6 V 2
Drive input voltage DI -0.3 6 V 2
Drive output voltage / receive input voltage A,B -7 12 V 2
Receiving output voltage RO -0.5 V Maximum printed as VCC+0.3 2
Storage temperature range TSTG -55 150 ℃ 2
Operating temperature range TOP -40 85 ℃ 2
Maximum operating temperature range TMOP -55 125 ℃ 2
Power dissipation PD 470 mW SOP-8 2
Solder temperature TL 300 ℃ 10 seconds 2

CAD (KiCad official)

  • Symbol: HX3082-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx3082-s-etched.step / hx3082-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx3082-s.step / hx3082-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (4 pp, sha256 021d740f4283f689, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF