component
XC6219B282MR-MS
Public Made by Adomby adom
MSKSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6219B282MR-MS
MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
XC6219B282MR-MS from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet rates the supply voltage from -0.3V to 8V absolute maximum, with input voltage up to 8V. |
| 2 | GND | power_in | Ground pin; the input capacitor (CIN) of 10uF should be connected between VIN and GND, and the output capacitor placed as close as possible to VOUT and GND. |
| 3 | CE | input | Chip enable pin that shuts down the internal circuitry; the datasheet recommends driving it with either a VIN or VSS voltage level. |
| 4 | NC | unconnected | No connection pin. |
| 5 | VOUT | power_out | Regulated output pin; the output capacitor should be at least 10uF and placed as close as possible to VOUT and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (tolerance) | -2 | 2 | % | 2 | |||
| Output voltage temperature coefficient | △Vout/(Ta· Vout) | -100 | 100 | Ppm/C | Iout=30mA, 0C≤Ta≤70C | 5 | |
| Line regulation | △Vout1/(△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V, Iout=10mA | 5 | |
| Load regulation | △Vout | 10 | 30 | V | Vin=4.3V, 1.0mA≤Iout≤100mA | 5 | |
| Input voltage | Vin | 8 | V | 5 | |||
| Supply voltage (absolute maximum) | -0.3 | 8 | V | 4 | |||
| Storage temperature | -50 | 125 | C | 4 | |||
| Operating temperature | -40 | 85 | C | 4 | |||
| Thermal resistance, junction to ambient (SOT23-5) | θJA | 500 | ℃/W | Assume no ambient airflow, no heat sink | 4 | ||
| Power dissipation (SOT23-5) | PD | 0.25 | W | Ta=25℃ | 4 | ||
| Output current | Iout | 350 | mA | Vin-Vout=1V | 5 | ||
| Supply current | Iss1 | 40 | uA | 5 | |||
| Power supply rejection ratio | PSRR | 60 | dB | F=1KHz, Vin=4.3Vdc+1Vpp | 5 |
CAD (KiCad official)
- Symbol:
XC6219B282MR-MS - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
xc6219b282mr-ms-etched.step/xc6219b282mr-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6219b282mr-ms.step/xc6219b282mr-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
86e38fb7ca4262ed, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).