component
INA240A1QPWRQ1
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA240A1QPWRQ1
Texas Instruments · Current Sense Amplifiers · TSSOP-8
INA240A1QPWRQ1 from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Reserved pin with no internal connection; ground or leave floating. |
| 2 | IN+ | input | Analog input connected to power side of shunt resistor; accepts differential input -80V to +80V relative to IN-. |
| 3 | IN- | input | Analog input connected to load side of shunt resistor; common-mode input voltage -4V to 80V independent of supply voltage. |
| 4 | GND | power_in | Analog ground reference. |
| 5 | VS | power_in | Power supply input; operating voltage 2.7V to 5.5V; output voltage range limited to GND to VS. |
| 6 | REF2 | input | Reference voltage 2 input; connect to 0V to VS to adjust output midpoint for single or bidirectional current measurement. |
| 7 | REF1 | input | Reference voltage 1 input; connect to 0V to VS to adjust output midpoint for single or bidirectional current measurement. |
| 8 | OUT | output | Analog output voltage proportional to differential input sensed across shunt resistor with 20V/V gain. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
INA240A1QPWRQ1 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina240a1qpwrq1-etched.step/ina240a1qpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina240a1qpwrq1.step/ina240a1qpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
c39d41044d3f311b, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).