3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F411VET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F411VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant FT I/O; alternate functions TRACECLK, SPI4_SCK/I2S4_CK, SPI5_SCK/I2S5_CK, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant FT I/O; alternate functions TRACED0, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant FT I/O; alternate functions TRACED1, SPI4_NSS/I2S4_WS, SPI5_NSS/I2S5_WS, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant FT I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SPI5_MISO, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant FT I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI/I2S4_SD, SPI5_MOSI/I2S5_SD, EVENTOUT. |
| 6 | VBAT | power_in | Backup domain supply for the RTC and backup registers. |
| 7 | PC13-ANTI_TAMP | bidirectional | 5 V tolerant FT I/O supplied through the power switch, limited to 3 mA sink; output speed must not exceed 2 MHz with 30 pF max load and it must not source current; also RTC_AMP1, RTC_OUT, RTC_TS. |
| 8 | PC14-OSC32_IN | bidirectional | I/O supplied through the power switch, limited to 3 mA sink; output speed must not exceed 2 MHz with 30 pF max load; also OSC32_IN. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch, limited to 3 mA sink; output speed must not exceed 2 MHz with 30 pF max load; also OSC32_OUT. |
| 10 | VSS | power_in | Ground pin. |
| 11 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os. |
| 12 | PH0-OSC_IN | bidirectional | 5 V tolerant FT I/O; in oscillator mode it serves as OSC_IN for the 4-to-26 MHz crystal. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V tolerant FT I/O; in oscillator mode it serves as OSC_OUT for the 4-to-26 MHz crystal. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; also EVENTOUT. |
| 15 | PC0 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, ADC1_10. |
| 16 | PC1 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, ADC1_11. |
| 17 | PC2 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI2_MISO, I2S2ext_SD, EVENTOUT, ADC1_12. |
| 18 | PC3 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT, ADC1_13. |
| 19 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os. |
| 20 | VSSA | power_in | Analog ground pin. |
| 21 | VREF+ | power_in | Positive reference voltage pin for the ADC. |
| 22 | VDDA | power_in | Analog supply pin. |
| 23 | PA0-WKUP | bidirectional | Standard 3.3 V TC I/O; alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, USART2_CTS, EVENTOUT; also ADC1_0 and WKUP1. |
| 24 | PA1 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, EVENTOUT; also ADC1_1. |
| 25 | PA2 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, EVENTOUT; also ADC1_2. |
| 26 | PA3 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, EVENTOUT; also ADC1_3. |
| 27 | VSS | power_in | Ground pin. |
| 28 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os; printed type is I in Table 8. |
| 29 | PA4 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT; also ADC1_4. |
| 30 | PA5 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK, EVENTOUT; also ADC1_5. |
| 31 | PA6 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_BKIN, TIM3_CH1, SPI1_MISO, I2S2_MCK, SDIO_CMD, EVENTOUT; also ADC1_6. |
| 32 | PA7 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SD, EVENTOUT; also ADC1_7. |
| 33 | PC4 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, ADC1_14. |
| 34 | PC5 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, ADC1_15. |
| 35 | PB0 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH2N, TIM3_CH3, SPI5_SCK/I2S5_CK, EVENTOUT; also ADC1_8. |
| 36 | PB1 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH3N, TIM3_CH4, SPI5_NSS/I2S5_WS, EVENTOUT; also ADC1_9. |
| 37 | PB2 | bidirectional | 5 V tolerant FT I/O; alternate function EVENTOUT; also BOOT1. |
| 38 | PE7 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_ETR, EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH1N, EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH1, EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH2N, EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH2, SPI4_NSS/I2S4_WS, SPI5_NSS/I2S5_WS, EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH3N, SPI4_SCK/I2S4_CK, SPI5_SCK/I2S5_CK, EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH3, SPI4_MISO, SPI5_MISO, EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH4, SPI4_MOSI/I2S4_SD, SPI5_MOSI/I2S5_SD, EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_BKIN, EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, SDIO_D7, EVENTOUT. |
| 48 | VCAP_1 | passive | Connection for the internal voltage regulator output capacitor. |
| 49 | VSS | power_in | Ground pin. |
| 50 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os. |
| 51 | PB12 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS/I2S4_WS, SPI3_SCK/I2S3_CK, EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, EVENTOUT. |
| 53 | PB14 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH2N, SPI2_MISO, I2S2ext_SD, SDIO_D6, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V tolerant FT I/O; alternate functions RTC_50Hz, TIM1_CH3N, SPI2_MOSI/I2S2_SD, SDIO_CK, EVENTOUT; also RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V tolerant FT I/O with no alternate functions listed in Table 8. |
| 56 | PD9 | bidirectional | 5 V tolerant FT I/O with no alternate functions listed in Table 8. |
| 57 | PD10 | bidirectional | 5 V tolerant FT I/O with no alternate functions listed in Table 8. |
| 58 | PD11 | bidirectional | 5 V tolerant FT I/O with no alternate functions listed in Table 8. |
| 59 | PD12 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH1, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH2, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH3, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH4, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM3_CH1, I2S2_MCK, USART6_TX, SDIO_D6, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM3_CH2, SPI2_SCK/I2S2_CK, I2S3_MCK, USART6_RX, SDIO_D7, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM3_CH3, USART6_CK, SDIO_D0, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant FT I/O; alternate functions MCO_2, TIM3_CH4, I2C3_SDA, I2S2_CKIN, SDIO_D1, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant FT I/O; alternate functions MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, USB_FS_SOF, SDIO_D1, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH2, I2C3_SMBA, USART1_TX, USB_FS_VBUS, SDIO_D2, EVENTOUT; also OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH3, SPI5_MOSI/I2S5_SD, USART1_RX, USB_FS_ID, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_CH4, SPI4_MISO, USART1_CTS, USART6_TX, USB_FS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM1_ETR, SPI5_MISO, USART1_RTS, USART6_RX, USB_FS_DP, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant FT I/O; alternate functions JTMS-SWDIO, EVENTOUT. |
| 73 | VCAP_2 | passive | Connection for the internal voltage regulator output capacitor. |
| 74 | VSS | power_in | Ground pin. |
| 75 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os. |
| 76 | PA14 | bidirectional | 5 V tolerant FT I/O; alternate functions JTCK-SWCLK, EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant FT I/O; alternate functions JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI3_SCK/I2S3_CK, SDIO_D2, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant FT I/O; alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant FT I/O; alternate function EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V tolerant FT I/O; alternate function EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM3_ETR, SDIO_CMD, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant FT I/O; alternate functions USART2_RTS, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant FT I/O; alternate functions USART2_TX, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI3_MOSI/I2S3_SD, USART2_RX, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant FT I/O; alternate functions USART2_CK, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant FT I/O; alternate functions JTDO-SWO, TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, I2C2_SDA, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant FT I/O; alternate functions JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, SDIO_D0, EVENTOUT. |
| 91 | PB5 | bidirectional | Standard 3.3 V TC I/O; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SDIO_D3, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, SDIO_D0, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin; also VPP alternate function. |
| 95 | PB8 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, I2C3_SDA, SDIO_D4, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C2_SDA, SDIO_D5, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM4_ETR, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant FT I/O; alternate function EVENTOUT. |
| 99 | VSS | power_in | Ground pin. |
| 100 | VDD | power_in | Power supply pin, 1.7 V to 3.6 V for the application supply and I/Os. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32F411VET6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f411vet6-etched.step/stm32f411vet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f411vet6.step/stm32f411vet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (149 pp, sha256
19c5df0b396382fa, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).