Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PI6CB33401ZHIEX

Diodes Incorporated · Clock Buffers, Drivers · TQFN-32-EP(5x5)

PI6CB33401ZHIEX from Diodes Incorporated, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BW_SEL_TRI input Tri-level latch selects low loop bandwidth, PLL bypass, or high loop bandwidth, and the pin has both internal pull-up and pull-down.
2 NC unconnected Internally connected for the feedback loop, so this pin must not be connected externally.
3 NC unconnected Internally connected for the feedback loop, so this pin must not be connected externally.
4 VDD_R power_in Supplies the input differential buffers, nominal 3.3V (3.135V to 3.465V).
5 IN+ input Differential true clock input for the reference clock, 100MHz with 50, 125 or 133.33MHz selectable via SMBus.
6 IN- input Differential complementary clock input for the reference clock.
7 NC unconnected Do not connect this pin.
8 GND_DIG power_in Ground for the digital circuitry.
9 SCLK input CMOS SMBus clock input that is 3.3V tolerant.
10 SDATA bidirectional CMOS SMBus data line that is 3.3V tolerant.
11 VDD_DIG power_in Supplies the digital circuitry, nominal 3.3V.
12 OE0# input Active-low output enable for the Q0 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
13 Q0+ output HCSL differential true clock output, with on-chip 100Ω termination by default.
14 Q0- output HCSL differential complementary clock output, with on-chip termination by default.
15 VDDO power_in Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V).
16 NC unconnected Do not connect this pin.
17 Q1+ output HCSL differential true clock output, with on-chip termination by default.
18 Q1- output HCSL differential complementary clock output, with on-chip termination by default.
19 OE1# input Active-low output enable for the Q1 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
20 NC unconnected Do not connect this pin.
21 VDDA power_in Supplies the analog circuitry, nominal 3.3V (3.135V to 3.465V).
22 Q2+ output HCSL differential true clock output, with on-chip termination by default.
23 Q2- output HCSL differential complementary clock output, with on-chip termination by default.
24 OE2# input Active-low output enable for the Q2 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
25 VDDO power_in Supplies the differential outputs, nominal 3.3V (3.135V to 3.465V).
26 NC unconnected Do not connect this pin.
27 Q3+ output HCSL differential true clock output, with on-chip termination by default.
28 Q3- output HCSL differential complementary clock output, with on-chip termination by default.
29 OE3# input Active-low output enable for the Q3 pair (1 = disable outputs, 0 = enable outputs), with an internal pull-down.
30 NC unconnected Do not connect this pin.
31 PD# input Low enters power-down mode and a subsequent high exits it; the pin has an internal pull-up resistor.
32 SADR_TRI input Tri-level latch selects the SMBus address on first application of PD#, with an internal pull-down.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-32-EP(5x5)
Category RTC/Clock Chip
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDDO, VDDA, VDD_R, VDD_DIG 3.135 3.3 3.465 V 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Storage Temperature -65 150 °C 5
Supply Voltage to Ground Potential VDDxx -0.5 4.6 V 5
SMBus Input High Voltage 3.6 V 5
ESD Protection (HBM) 2000 V 5
Analog Power Supply Current IDDA 21 25 mA VDDA, PLL mode, All outputs active @100MHz 5
Digital Power Supply Current IDD_DIG 0.1 1 mA VDD_DIG, All outputs active @100MHz 5
Power Supply Current for Inputs and Outputs IDDO+R 48 54 mA VDDO + VDD_R, PLL mode, All outputs active @100MHz 5
Analog Power Supply Power Down Current IDDA_PD 0.5 1 mA VDDA, PLL mode, All outputs LOW/LOW 5
Digital Power Supply Power Down Current IDD_DIG_PD 0.1 1 mA VDD_DIG, All outputs LOW/LOW 5
Power Supply Current for Inputs and Outputs Power Down IDDO_R_PD 1 2 mA VDDO, VDD_R All outputs LOW/LOW 5
Internal pull up resistance Rpu 120 KW 5
Internal pull down resistance Rdn 120 KW 5
Nominal bus voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus sink current ISMBSINK 4 mA SMBus, at VOLSMB 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus operating frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus rise time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus fall time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
Input Low Voltage VIL -0.3 V Single-ended inputs, except SMBus 6
Input High Current IIH 5 mA Single-ended inputs, VIN = VDD 6
Input Low Current IIL -5 µA Single-ended inputs, VIN = 0V 6
Input High Current IIH 50 mA Single-ended inputs with pull up / pull down resistor, VIN = VDD 6
Input Low Current IIL -50 µA Single-ended inputs with pull up / pull down resistor, VIN = 0V 6
Input Capacitance CIN 1.5 5 pF 6
Output enable latency tOELAT 1 3 clocks Q start after OE# assertion; Q stop after OE# deassertion 7
PD# de-assertion tPDLAT 20 300 us Differential outputs enable after PD# de-assertion 7
Diff. Input High Voltage VIHDIF 600 800 1150 mV IN+, IN-, single-end measurement 7
Diff. Input Low Voltage VILDIF -300 0 300 mV IN+, IN-, single-end measurement 7
Diff. Input Common Mode Voltage VCOM 150 900 mV 7
Diff. Input Swing Voltage VSWING 300 2900 mV Peak to peak value (VIHDIF - VILDIF) 7
Input Frequency fINBP 1 200 MHz PLL Bypass mode 7
Input Frequency 100MHz PLL fIN100 99.9 100 100.1 MHz PLL 7
Input Frequency 133MHz PLL fIN133 133.2 133.33 133.46 MHz PLL 7
Input Frequency 125MHz PLL fIN125 124.87 125 125.12 MHz PLL 7
Input Frequency 50MHz PLL fIN50 49.95 50 50.05 MHz PLL 7
Input SS Modulation Freq. PCIe fMODI-PCIe 30 33 kHz Allowable frequency for PCIe applications (Triangular Modulation) 7
Input SS Modulation Freq. non-PCIe fMODIN-non-PCIe 0 46 kHz Allowable frequency for non-PCIe applications (Triangular Modulation) 7
Clock stabilization tSTAB 0.75 1 ms From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock 7
Diff. Input Slew Rate tRF 0.4 V/ns Measured differentially 7
Diff. Input Leakage Current IIN -5 0.01 5 uA VIN = VDD, VIN = GND 7
Diff. Input Duty Cycle tDC 45 55 % Measured differentially 7
Diff. Input Cycle to cycle jitter tjc-c 125 ps Measured differentially 7
Output Frequency fOUT 50 100 133.33 MHz 8
PLL bandwidth -3dB point High Bandwidth Mode BW 1.3 3.2 3.6 MHz -3dB point in High Bandwidth Mode 8
PLL bandwidth -3dB point Low Bandwidth Mode BW 0.7 1.7 1.9 MHz -3dB point in Low Bandwidth Mode 8
Slew rate fast setting tRF 2.5 3.2 4 V/ns Scope averaging on fast setting 8
Slew rate slow setting tRF 2.2 3 3.7 V/ns Scope averaging on slow setting 8
Output Skew tSKEW 21 50 ps Averaging on, VT = 50% 8
Propagation delay PLL Bypass mode tPDELAY 2000 2500 3000 ps PLL Bypass mode, VT = 50% 8
Propagation delay PLL mode tPDELAY -200 90 200 ps PLL mode, VT = 50% 8
Duty Cycle tDC 45 50 55 % Measured differentially, PLL Mode 8
Thermal Resistance Junction to Ambient θJA 44.7 °C/W Still air 17
Thermal Resistance Junction to Case θJC 21.7 °C/W 17

CAD (KiCad official)

  • Symbol: PI6CB33401ZHIEX
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: pi6cb33401zhiex-etched.step / pi6cb33401zhiex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cb33401zhiex.step / pi6cb33401zhiex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (20 pp, sha256 89e8689b3c2da3fd, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF