component
GBU10M
Public Made by Adomby adom
LGE Bridge Rectifiers, GBU. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGBU10M
LGE · Bridge Rectifiers · GBU
GBU10M from LGE, in a GBU. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | - | passive | Negative DC output terminal of the bridge rectifier, marked '-' on the package drawing. |
| 2 | AC1 | passive | AC input terminal, marked 'AC' on the package drawing; the part is rated 700 V RMS maximum for GBU10M. |
| 3 | AC2 | passive | Second AC input terminal, marked 'AC' on the package drawing; the part is rated 700 V RMS maximum for GBU10M. |
| 4 | + | passive | Positive DC output terminal of the bridge rectifier, marked '+' on the package drawing; average forward output current is 10.0 A at TC=100°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LGE |
| Package | GBU |
| Category | Diodes |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum recurrent peak reverse voltage | VRRM | 1000 | V | GBU10M column | 1 | ||
| Maximum RMS voltage | VRMS | 700 | V | GBU10M column | 1 | ||
| Maximum DC blocking voltage | VDC | 1000 | V | GBU10M column | 1 | ||
| Maximum average forward output current | IF(AV) | 10 | A | @TC=100℃ | 1 | ||
| Peak forward surge current | IFSM | 220 | A | 8.3ms single half-sine-wave superimposed on rated load | 1 | ||
| Maximum instantaneous forward voltage | VF | 1.1 | V | @5.0A | 1 | ||
| Maximum reverse current | IR | 5 | μA | @TA=25℃, at rated DC blocking voltage | 1 | ||
| Maximum reverse current | IR | 500 | μA | @TA=125℃, at rated DC blocking voltage | 1 | ||
| I²t rating for fusing | I²t | 200 | A²S | @Tj=25℃ | 1 | ||
| Operating junction temperature range | TJ | -55 | 150 | ℃ | 1 | ||
| Storage temperature range | TSTG | -55 | 150 | ℃ | 1 | ||
| Typical thermal resistance per leg, junction to ambient | RθJA | 22 | ℃/W | Units mounted in free air, no heat sink on P.C.B., 0.5x0.5 in (12x12mm) copper pads, 0.375 in (9.5mm) lead length (note 2) | 1 | ||
| Typical thermal resistance per leg, junction to case | RθJC | 2 | ℃/W | Unit case mounted on 3.2x3.2x0.12 in (6.2x8.2x0.3cm) Al. plate (note 1) | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2. Units mounted in free air, no heat sink on P.C.B., 0.5x0.5"(12x12mm) copper pads, 0.375"(9.5mm) lead length. | 1 |
CAD (KiCad official)
- Symbol:
GBU10M - Footprint:
Diode_THT:Diode_Bridge_Vishay_GBU - 3D model: GBU (KiCad packages3D, STEP)
- 3D model files:
gbu10m-etched.step/gbu10m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gbu10m.step/gbu10m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LGE datasheet (3 pp, sha256
06c0822d78a83ac1, retrieved 2026-10-21, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).