3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLS7183N-S
LSI/CSI · Interface - Specialized · SOIC-8
LS7183N-S from LSI/CSI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RBIAS | passive | Input for an external resistor (2K to 10M ohm) connected between this pin and VSS that adjusts the output clock pulse width (Tow). |
| 2 | VDD | power_in | Positive supply voltage terminal, +3V to +12V operation relative to VSS (absolute maximum 16V). |
| 3 | VSS | power_in | Negative supply voltage terminal (ground). |
| 4 | A | input | Quadrature clock input A with built-in noise immunity for signals shorter than 50ns, inhibited during a directional output clock. |
| 5 | B | input | Quadrature clock input B with built-in noise immunity for signals shorter than 50ns, inhibited during a directional output clock. |
| 6 | MODE | input | 3-state resolution select input: 0 selects x1, 1 selects x2, Float selects x4. |
| 7 | DNCK | output | LS7183N DOWN Clock output of low-going pulses generated when A input lags the B input. |
| 8 | UPCK | output | LS7183N UP Clock output of low-going pulses generated when A input leads the B input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LSI/CSI |
| Package | SOIC-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | TA | -20 | 85 | ºC | 2 | ||
| Storage temperature | TSTG | -55 | 150 | ºC | 2 | ||
| DC Supply Voltage | VDD - VSS | 16 | V | 2 | |||
| Supply Voltage | VDD | 3 | 12 | V | - | 2 | |
| Supply Current | IDD | 1.5 | 1.65 | mA | VDD=12V, all input frequencies=0 Hz and RBIAS=2MΩ | 2 | |
| Logic 0 | Vml | 0.5 | V | - | 2 | ||
| Logic 0 Input Current | Iml | 2.2 | 4.2 | μA | VDD = 3V | 2 | |
| Logic 0 Input Current | Iml | 3.5 | 6.9 | μA | VDD = 5V | 2 | |
| Logic 0 Input Current | Iml | 8.3 | 16.2 | μA | VDD = 12V | 2 | |
| Logic 1 Input Current | Imh | -2 | -9.8 | μA | VDD = 3V | 2 | |
| Logic 1 Input Current | Imh | -3.4 | -6.6 | μA | VDD = 5V | 2 | |
| Logic 1 Input Current | Imh | -8.2 | -16 | μA | VDD = 12V | 2 | |
| Input Current | IABlk | 0 | 10 | nA | - | 2 | |
| Sink Current | Iol | -3.4 | mA | VO = 0.5V, VDD = 3V | 2 | ||
| Sink Current | Iol | -4.8 | mA | VO = 0.5V, VDD = 5V | 2 | ||
| Sink Current | Iol | -7.2 | mA | VO = 0.5V, VDD = 12V | 2 | ||
| Source Current | Ioh | 1.7 | mA | VO = 2.5V, VDD = 3V | 2 | ||
| Source Current | Ioh | 2.2 | mA | VO = 4.5V, VDD = 5V | 2 | ||
| Source Current | Ioh | 3.1 | mA | VO = 11.5V, VDD = 12V | 2 | ||
| Output Clock Pulse Width | TOW | 540 | ns | VDD = 3V | 2 | ||
| Output Clock Pulse Width | TOW | 225 | ns | VDD = 5V | 2 | ||
| Output Clock Pulse Width | TOW | 112 | ns | VDD = 12V | 2 | ||
| Validation Delay | TVD | 450 | ns | VDD = 3V | 2 | ||
| Validation Delay | TVD | 200 | ns | VDD = 5V | 2 | ||
| Validation Delay | TVD | 90 | ns | VDD = 12V | 2 | ||
| Input to output Delay | TDS | 490 | 565 | ns | VDD = 3V | 2 | |
| Input to output Delay | TDS | 220 | 345 | ns | VDD = 5V | 2 | |
| Input to output Delay | TDS | 125 | 135 | ns | VDD = 12V | 2 |
CAD (KiCad official)
- Symbol:
LS7183N-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ls7183n-s-etched.step/ls7183n-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ls7183n-s.step/ls7183n-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LSI/CSI datasheet (4 pp, sha256
a7ef811d7232123d, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).