Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC2545A-1YM-TR

Microchip Tech · Power Management Specialized - PMIC · SOIC-8

MIC2545A-1YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Logic-compatible enable input (-1 version active high, -2 version active low) with high >1.8V typical and low <1.4V typical; do not float, and on the MIC2549A it also resets the thermal-shutdown latch.
2 FLG output Active-low open-drain fault flag output that indicates overcurrent or thermal shutdown (latched low on thermal shutdown for MIC2549A only).
3 GND power_in Ground supply return.
4 ILIM passive Current-limit set pin: an external resistor RSET to ground sets the threshold, with 76.8Ω < RSET < 459Ω.
5 IN power_in Supply input and output MOSFET drain that also powers internal circuitry (2.7V to 5.5V operating); both IN pins must be externally connected together.
6 OUT power_out Switch output (output MOSFET source); both OUT pins must be externally connected together.
7 IN power_in Supply input and output MOSFET drain that also powers internal circuitry (2.7V to 5.5V operating); both IN pins must be externally connected together.
8 OUT power_out Switch output (output MOSFET source); both OUT pins must be externally connected together.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current, switch off IIN 0.75 5 µA Switch Off, OUT = Open 4
Supply Current, switch on IIN 90 150 µA Switch On, OUT = Open 4
Enable High Transition VEN 1.6 2.4 V Enable High Transition 4
Enable Low Transition VEN 0.8 1.5 V Enable Low Transition 4
Enable Input Current (high) 0.01 1 µA VEN = VOH(MIN) = 2.4V 4
Enable Input Current (low) 0.01 1 µA VEN = VOL(MAX) = 0.8V 4
Switch Resistance RDS(ON) 35 50 mΩ IOUT = 500mA 4
Current-Limit Factor 184 230 276 V ILIMIT = 0.5A to 3A, VOUT = 1V to 4V 4
Current-Limit Factor 195 230 264 V ILIMIT = 1A to 2.5A, VOUT = 1V to 4V 4
Output Leakage Current 1 10 µA Switch Off, VOUT = 0V 4
Output Turn-On Delay tON 1 2 5 ms RL = 10Ω, CL = 1µF, Figures 1a, 1b 4
Output Turn-On Rise Time tR 0.75 1.8 4.9 ms RL = 10Ω, CL = 1µF, Figures 1a, 1b 4
Error Flag Off Current 0.01 1 µA VFLG = 5V 5
Error Flag Output Resistance VOL 4 15 Ω IFLG = 10mA 5
Output Turn-Off Delay tOFF 25 µs RL = 10Ω, CL = 1µF, Figures 1a, 1b 4
Output Turn-Off Fall Time tF 23 µs RL = 10Ω, CL = 1µF, Figures 1a, 1b 5
Overtemperature Shutdown Threshold 135 °C TJ Increasing 5
Overtemperature Shutdown Threshold 120 °C TJ Decreasing 5
Current-Limit Response Time 40 µs VOUT = 0V to IOUT = 2A, ISET = 1A 5
Enable Input Capacitance 1 pF Note 7 4
Supply Voltage (absolute maximum) VIN 7 V 4
Output Voltage (absolute maximum) VOUT 7 V 4
Enable Input Voltage (absolute maximum) VEN -0.3 7 V 4
Fault Flag Voltage (absolute maximum) VFLG 7 V 4
Fault Flag Current (absolute maximum) IFLG 50 mA 4
Storage Temperature Ts -65 150 °C 4
Lead Temperature 260 °C soldering, 5sec. 4
Supply Voltage (operating) VIN 2.7 5.5 V 4
Ambient Temperature (operating) TA -40 85 °C 4
Current-Limit Set Range 0.5 3 A 4

CAD (KiCad official)

  • Symbol: MIC2545A-1YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic2545a-1ym-tr-etched.step / mic2545a-1ym-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2545a-1ym-tr.step / mic2545a-1ym-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 ceb88a7543014ee2, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF