Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF3440IDBVR

Texas Instruments · Voltage Reference · SOT-23-6

REF3440IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND_F power_in Ground force connection. Kelvin-force ground for the reference; carries the return current from the load and should be tied to the ground plane at the load return point.
2 GND_S input Ground sense connection. High-impedance Kelvin-sense input that ties the internal reference amplifier's ground node directly to the remote load ground, cancelling IR drop in the GND_F return trace.
3 EN input Enable pin. Drive high (up to VIN) to enable the reference; drive low to place the device in shutdown. Valid range 0 V to VIN per the recommended operating conditions.
4 IN power_in Input supply voltage connection. Accepts VOUT + VDO up to 12 V (13 V absolute max); bypass locally with a 1 µF CIN capacitor as shown in the typical application schematic.
5 OUT_S input Reference voltage output sense connection. High-impedance Kelvin-sense input that lets the internal amplifier regulate the reference voltage at the remote load, cancelling IR drop in the OUT_F trace.
6 OUT_F output Reference voltage output force connection. Delivers the 4.096 V reference and sources/sinks up to ±10 mA into the load; decouple with a 10 µF COUT capacitor per the typical application.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • REF3440IDBVR
  • REF3440IDBVT
  • REF3440IDBVRTIDBVR
  • REF3440IDBVRTIDBVT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (absolute maximum) IN -0.3 13 V 6
Enable pin voltage (absolute maximum) EN -0.3 V Printed max is IN + 0.3 6
Output voltage (absolute maximum) VOUT -0.3 5.5 V 6
Output short circuit current (absolute maximum) ISC 20 mA 6
Operating temperature range (absolute maximum) TA -55 150 °C 6
Storage temperature range Tstg -65 170 °C 6
Input voltage (recommended) IN 12 V Printed min is VOUT + VDO 6
Enable voltage (recommended) EN 0 V Printed max is IN 6
Output current (recommended) IL -10 10 mA 6
Operating temperature (recommended) TA -40 25 125 °C 6
Output voltage accuracy -0.05 0.05 % TA = 25℃ 7
Output voltage temperature coefficient 2.5 6 ppm/°C –40°C ≤ TA ≤ 125°C 7
Line regulation ΔVO/ΔVIN 2 15 ppm/V VIN = VOUT + VDO (2) to 12 V 7
Load regulation, sourcing ΔVO/ΔIL 20 30 ppm/mA IL = 0 mA to 10mA, VIN = VOUT+ VDO (3) 7
Load regulation, sinking (REF3440) ΔVO/ΔIL 60 98 ppm/mA IL = 0 mA to –10mA, VIN = VOUT+ VDO, TA = 25°C (3) 7
Short circuit current ISC 18 22 mA VOUT = 0 V at TA = 25°C 7
Output current capacity IL -10 10 mA VIN = VOUT + VDO to 12 V 7
Input voltage VIN 12 V 7
Quiescent current, active mode IQ 72 95 µA Active mode 8
Quiescent current, shutdown mode IQ 2.5 3 µA Shutdown mode 8
ENABLE pin voltage, reference in active mode VEN 1.6 V Voltage reference in active mode (EN = 1) 8
ENABLE pin voltage, reference in shutdown mode VEN 0.5 V Voltage reference in shutdown mode (EN = 0) 8
Dropout voltage at IL = 0 mA VDO 50 100 mV IL = 0 mA 8
Dropout voltage at IL = 10 mA VDO 500 mV IL = 10 mA 8
ENABLE pin leakage current IEN 1 2 µA VEN = VIN = 12V 8
Stable output capacitor range CL 0.1 10 µF –40°C ≤ TA ≤ 125°C 7
Low frequency noise (REF3440 and REF3450) enp-p 3.8 µVp-p/V 0.1Hz ≤ f ≤ 10Hz (REF3440 and REF3450) 7
Integrated wide band noise en 24 µVrms 10Hz ≤ f ≤ 10kHz 7
Output voltage noise density (REF3440 and REF3450) en 0.2 ppm/√Hz f = 1kHz (REF3440 and REF3450) 7
Long-term stability, 0 to 1000h 25 ppm 0 to 1000h at 35°C, DBV Package 7
Long-term stability, 1000h to 2000h 10 ppm 1000h to 2000h at 35°C, DBV Package 7
Output voltage thermal hysteresis, cycle 1 30 ppm 25°C, –40°C,125°C, 25°C Cycle 1, DBV Package 7
Output voltage thermal hysteresis, cycle 2 10 ppm 25°C, –40°C,125°C, 25°C Cycle 2, DBV Package 7
Turn-on time tON 2.5 ms 0.1% of output voltage settling, CL = 10 µF 7
Output voltage (REF3440, REF3440T) VOUT 4.096 V REF3440, REF3440T 7
Junction-to-ambient thermal resistance (DBV) RθJA 122.6 °C/W 6
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 80.2 °C/W 6
Junction-to-board thermal resistance (DBV) RθJB 42 °C/W 6
Junction-to-top characterization parameter (DBV) ΨJT 23.2 °C/W 6
Junction-to-board characterization parameter (DBV) ΨJB 41.9 °C/W 6

CAD (KiCad official)

  • Symbol: REF3440IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ref3440idbvr-etched.step / ref3440idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref3440idbvr.step / ref3440idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 4daf8dbbd5b7be4c, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF