3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5232-2.8YD5-TR
Microchip Tech · Linear Voltage Regulators (LDO) · TSOT-23-5
MIC5232-2.8YD5-TR from Microchip Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input, operating range 2.7V to 7V per the operating ratings. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Active-high enable input: logic low below 0.18V shuts the regulator down and logic high above 1.4V enables it, and it must not be left floating. |
| 4 | NC | unconnected | Not internally connected. |
| 5 | VOUT | power_out | Regulated output rated for 10mA output current, requiring a 0.47µF or larger ceramic capacitor to VOUT and GND for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Input Voltage | VIN | 0 | 8 | V | 4 | ||
| Enable Input Voltage | VEN | 0 | 8 | V | 4 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| Lead Temperature | 260 | °C | soldering, 5 sec. | 4 | |||
| ESD Rating | -2 | 2 | kV | 4 | |||
| Supply voltage | VIN | 2.7 | 7 | V | 4 | ||
| Enable Input voltage | VEN | 0 | V | to VIN | 4 | ||
| Output Voltage Accuracy | -2 | 2 | % | Variation from nominal VOUT | 4 | ||
| Output Voltage Accuracy over temperature | -3 | 3 | % | Variation from nominal VOUT; -40C to +125C | 4 | ||
| Line Regulation | 0.02 | 0.25 | %/V | VIN = VOUT +1V to7V | 4 | ||
| Load Regulation | 0.2 | 1 | % | IOUT = 10µA to 10mA | 4 | ||
| Load Regulation | 1.5 | % | IOUT = 10µA to 10mA | 4 | |||
| Dropout Voltage | 60 | mV | IOUT = 100µA | 4 | |||
| Dropout Voltage | 100 | 300 | mV | IOUT = 10mA | 4 | ||
| Ground Pin Current | 1.8 | 3 | µA | IOUT = 10µA | 4 | ||
| Ground Pin Current in Shutdown | 0.1 | 1.5 | µA | VEN < 0.18V | 4 | ||
| Current Limit | 70 | 120 | mA | VOUT = 0V | 4 | ||
| Reverse Current | 0.02 | 1 | µA | VOUT = VIN + 1V | 4 | ||
| Ripple Rejection | 55 | dB | f = 10Hz | 4 | |||
| Ripple Rejection | 35 | dB | f = 1kHz | 4 | |||
| Output Voltage Noise | 400 | µVrms | COUT =0.47µF; 10Hz to 100kHz | 4 | |||
| Enable Input Voltage Logic Low (Regulator Shutdown) | 0.18 | V | Regulator Shutdown | 4 | |||
| Enable Input Voltage Logic High (Regulator Enabled) | 1.4 | V | Regulator Enabled | 4 | |||
| Enable Input Current | 1 | nA | VIL < 0.18V (Regulator Shutdown) | 4 | |||
| Turn-on Time | 0.75 | 1.5 | ms | COUT = 0.47µF | 4 | ||
| Output Voltage Temp. Coefficient | 40 | ppm/C | 4 | ||||
| Thermal Resistance Junction-to-Ambient TSOT-23-5 | θJA | 235 | °C/W | TSOT-23-5 | 4 |
CAD (KiCad official)
- Symbol:
MIC5232-2.8YD5-TR - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5232-2-8yd5-tr-etched.step/mic5232-2-8yd5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5232-2-8yd5-tr.step/mic5232-2-8yd5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
a0da07523c01338d, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).