Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SLG46827-AG

RENESAS · Programmable Logic Device (CPLDs/FPGAs) · TSSOP-20

SLG46827-AG from RENESAS, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IO14 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP0H+ analog comparator positive input and EXT_RESET, powered from VDD2.
2 IO13 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP1H+ analog comparator positive input, powered from VDD2.
3 IO12 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP2L+ analog comparator positive input, powered from VDD2.
4 IO11 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP3L+ analog comparator positive input, powered from VDD2.
5 IO10 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref0_OUT voltage reference 0 output and EXT_OSC1_IN, powered from VDD2.
6 IO9 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref1_OUT voltage reference 1 output and I2C_EXPAND_3, powered from VDD2.
7 VDD2 power_in Second power supply for IOs 7 to 14, 1.71 V to 5.5 V and must not exceed VDD.
8 IO8 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_OSC2_IN, powered from VDD2.
9 IO7 output General purpose output with push-pull (1x/2x) or open-drain NMOS (1x/2x) options, powered from VDD2.
10 GND power_in Ground; the GND rail is split in two sides, with IOs 7 to 14 on one side and IOs 0 to 6, SCL, SDA on the other, and maximum DC current per chip side is 100 mA.
11 IO6 output General purpose output with push-pull (1x/2x) output option, powered from VDD.
12 SDA bidirectional I2C serial data input/output, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options.
13 SCL input I2C serial clock input, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options.
14 IO5 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_3 slave address bit and I2C_EXPAND_1.
15 IO4 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_2 slave address bit.
16 IO3 bidirectional General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_1 slave address bit.
17 IO2 bidirectional General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_0 slave address bit.
18 IO1 bidirectional General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_Vref analog comparator negative input.
19 IO0 bidirectional General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as I2C_EXPAND_0 and EXT_OSC0_IN external clock connection.
20 VDD power_in Main power supply, 2.3 V to 5.5 V (2.5 V to 5.5 V during NVM write and erase), powering IOs 0 to 6, SCL and SDA and the core, with a 0.1 uF capacitor recommended.

Key specifications

Parameter Value
Manufacturer RENESAS
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage on VDD relative to GND VDD -0.3 7 V 12
DC Input Voltage -0.5 0.5 V GND - 0.5 V to VDD + 0.5 V (min/max are offsets from GND/VDD) 12
Max DC Current Through VDD Pin 90 mA 12
Max DC Current Through VDD2 Pin 90 mA 12
Max DC Current Through GND Pin 100 mA Per chip side 12
Max DC Current Through Pin, Push-Pull 1x 15.3 mA Push-Pull 1x 12
Max DC Current Through Pin, Push-Pull 2x 22.1 mA Push-Pull 2x 12
Max DC Current Through Pin, OD 1x 15.5 mA OD 1x 12
Max DC Current Through Pin, OD 2x 23 mA OD 2x 12
Current at Input Pin -1 1 mA 12
Input leakage (Absolute Value) 1000 nA 12
Storage Temperature Range -65 150 °C 12
Junction Temperature 150 °C 12
ESD Protection (Human Body Model) 2000 V 12
ESD Protection (Charged Device Model) 1300 V 12
Supply Voltage (VDD) VDD 2.3 5.5 V 12
Supply Voltage (VDD) during NVM Write and Erase VDD 2.5 5.5 V During NVM Write and Erase commands 12
Supply Voltage 2 (VDD2) VDD2 1.71 5.5 V VDD2 ≤ VDD 12
Operating Temperature -40 105 °C 12
Maximal Voltage Applied to any PIN in High Impedance State 0.3 V VDD+0.3 (max is offset above VDD) 12
Capacitor Value at VDD 0.1 µF 12
Analog Input Common Mode Range 0 V Allowable Input Voltage at Analog Pins; max VDD or VDD2 12
HIGH-Level Input Voltage, Logic Input VIH 0.7 V Logic Input; min 0.7x VDD 13
HIGH-Level Input Voltage, Schmitt Trigger VIH 0.8 V Logic Input with Schmitt Trigger; min 0.8x VDD 13
HIGH-Level Input Voltage, Low-Level Logic Input VIH 1.25 V Low-Level Logic Input 13
LOW-Level Input Voltage, Logic Input VIL 0.3 V Logic Input; max 0.3x VDD 13
LOW-Level Input Voltage, Schmitt Trigger VIL 0.2 V Logic Input with Schmitt Trigger; max 0.2x VDD 13
LOW-Level Input Voltage, Low-Level Logic Input VIL 0.5 V Low-Level Logic Input 13
Schmitt Trigger Hysteresis Voltage VHYS 0.195 0.38 0.559 V VDD2 = 1.8 V ± 5 % 13
Schmitt Trigger Hysteresis Voltage VHYS 0.199 0.391 0.634 V VDD = 2.3 V 13
Schmitt Trigger Hysteresis Voltage VHYS 0.232 0.422 0.604 V VDD = 3.3 V 13
Schmitt Trigger Hysteresis Voltage VHYS 0.283 0.44 0.641 V VDD = 4.0 V 13
Schmitt Trigger Hysteresis Voltage VHYS 0.37 0.577 0.785 V VDD = 5.5 V 13
HIGH-Level Output Voltage VOH 2.167 2.207 V Push-Pull, 1x Drive, IOH = 1 mA, VDD = VDD2 = 2.3 V 13
HIGH-Level Output Voltage VOH 5.192 5.268 V Push-Pull, 1x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V 13
HIGH-Level Output Voltage VOH 5.34 5.382 V Push-Pull, 2x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V 13
LOW-Level Output Voltage VOL 0.069 0.1 V Push-Pull, 1x Drive, IOL= 1 mA, VDD = VDD2 = 2.3 V 13
LOW-Level Output Voltage VOL 0.188 0.268 V Push-Pull, 1x Drive, IOL= 5 mA, VDD = VDD2 = 5.5 V 14
LOW-Level Output Voltage VOL 0.045 0.064 V NMOS OD, 2x Drive, IOL = 5 mA, VDD = VDD2 = 5.5 V 14
HIGH-Level Output Current IOH 1.461 2.04 mA Push-Pull, 1x Drive, VOH = VDD - 0.2 = VDD2 - 0.2, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C 14
HIGH-Level Output Current IOH 27.466 34.554 mA Push-Pull, 1x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V 14
HIGH-Level Output Current IOH 52.371 66.673 mA Push-Pull, 2x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V 15
LOW-Level Output Current IOL 1.413 2.099 mA Push-Pull, 1x Drive, VOL = 0.15 V, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C 15
LOW-Level Output Current IOL 30.115 42.783 mA NMOS OD, 2x Drive, VOL = 0.4 V, VDD = VDD2 = 5.5 V 15
Startup Time TSU 2.082 2.745 ms From VDD rising past PONTHR, Tramp = 10ms 15
NVM Page Write Time TWR 20 ms VDD = 2.5 V to 5.5 V 15
NVM Page Erase Time TER 20 ms VDD = 2.5 V to 5.5 V 15
Power-On Threshold PONTHR 1.521 1.843 2.117 V VDD Level Required to Start Up the Chip 15
Power-Off Threshold POFFTHR 0.839 1.242 1.593 V VDD Level Required to Switch Off the Chip 15
Input Capacitance CIN 1.986 2.33 2.62 pF 16
Input Leakage, Logic Input w/o Schmitt (IO0-IO2, IO5, IO8, IO9-IO14) ILKG 0.008 7.022 nA VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V 17
Input Leakage, Logic Input w/o Schmitt (IO3, IO4) ILKG 0.013 10.868 nA VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V 17
ACMP Input Leakage ILKG 0.011 12.928 nA VIN- = VDD, VDD = 5.5 V, Ext.Vref, Gain = 1 18
Oscillator 2.048 kHz OSC0 frequency limits 1.83 2.097 kHz -40 °C to +105 °C, VDD = 2.3 V to 5.5 V 26
Oscillator 2.048 MHz OSC1 frequency limits 1949.49 2089.94 kHz -40 °C to +105 °C, VDD = 2.3 V to 5.5 V 26
Oscillator 25 MHz OSC2 frequency limits 23680.4 25574 kHz -40 °C to +105 °C, VDD = 2.3 V to 5.5 V 26
ACMP Input Voltage Range, Positive Input VACMP 0 V Positive Input; max VDD 26
ACMP0H/1H Input Offset Voltage Voffset -8.765 5.212 mV Vhys = 0 mV, Gain = 1, Vref = 32 mV 27
ACMP2L/3L Start Time tstart 138.254 358.76 µs ACMP Power-On delay 27
Chip Quiescent Current I 0.39 µA VDD = 3.3 V (typ only) 19

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts silver SLG46827-AG 20-pin TSSOP SLG46827-AGTR 20-pin TSSOP Tape and Reel (4k units) 174

CAD (KiCad official)

  • Symbol: SLG46827-AG
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: slg46827-ag-etched.step / slg46827-ag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); slg46827-ag.step / slg46827-ag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (181 pp, sha256 39f05d6d1494f913, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF