Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM48511SQX

Texas Instruments · Audio Amplifiers · WQFN-24-EP(4x5)

LM48511SQX from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB_SEL input Regulator feedback select input; connect to VDD to select feedback network connected to FB_GND1, or connect to GND to select feedback network connected to FB_GND0.
2 SW passive Drain of the internal FET switch for boost converter switching stage.
3 SW passive Drain of the internal FET switch for boost converter switching stage.
4 SOFTSTART passive Soft-start capacitor connection point for limiting transient current at start-up.
5 SD_AMP input Amplifier active-low shutdown input; connect to VDD for normal operation or to GND to disable amplifier.
6 SS/FF input Modulation mode select input; connect to VDD for spread spectrum mode (SS) or to GND for fixed frequency mode (FF).
7 GND power_in Signal ground for analog circuits and Class D amplifier.
8 LS+ output Amplifier noninverting output; supplies current to positive terminal of speaker load.
9 LSGND power_in Amplifier H-Bridge ground, part of the output stage power return path.
10 PV1 power_in Amplifier H-Bridge power supply input; must be connected to V1 for proper operation.
11 LSGND power_in Amplifier H-Bridge ground, part of the output stage power return path.
12 LS- output Amplifier inverting output; supplies current to negative terminal of speaker load.
13 V1 power_in Amplifier supply voltage node; connect to PV1 from boost converter output.
14 VGO+ output Amplifier noninverting gain output stage signal for feedback resistor network.
15 IN- input Amplifier inverting input for differential audio signal; input impedance determined by external input resistors.
16 IN+ input Amplifier noninverting input for differential audio signal; input impedance determined by external input resistors.
17 VGO- output Amplifier inverting gain output stage signal for feedback resistor network.
18 VDD power_in Power supply input, operating range 3 V to 5.5 V with 9 V absolute maximum rating.
19 FB input Regulator feedback input connected to midpoint of external voltage divider network to set boost output voltage.
20 FB_GND1 power_in Ground return for R2 resistor in voltage divider network; selected when FB_SEL = VDD.
21 FB_GND0 power_in Ground return for R1 resistor in voltage divider network; selected when FB_SEL = GND.
22 REGGND power_in Power ground for boost converter switching stage and regulator circuits.
23 REGGND power_in Power ground for boost converter switching stage and regulator circuits.
24 SD_BOOST input Regulator active-low shutdown input; connect to VDD for normal operation or to GND to disable boost regulator.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x5)
Category Amplifiers/Comparators
Pins 25

CAD (KiCad official)

  • Symbol: LM48511SQX
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)
  • 3D model files: lm48511sqx-etched.step / lm48511sqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm48511sqx.step / lm48511sqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 47fbd38c5dc884f1, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF