component
ADA4084-1ARZ
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADA4084-1ARZ
Analog Devices · Operational Amplifier · SOIC-8
ADA4084-1ARZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | Not internally connected; the datasheet specifies no internal connection for this pin on the ADA4084-1 8-lead SOIC. |
| 2 | −IN | input | Negative (inverting) input; the input voltage must stay within V− ≤ VIN ≤ V+, and differential input voltage is limited to ±0.6 V (input current must be limited to less than 5 mA above 0.6 V to prevent damage). |
| 3 | +IN | input | Positive (non-inverting) input; the input voltage must stay within V− ≤ VIN ≤ V+, and differential input voltage is limited to ±0.6 V. |
| 4 | V− | power_in | Negative supply; the amplifier is guaranteed to operate from +3 V to +30 V single supply or ±1.5 V to ±15 V split supply, with an absolute maximum supply of ±18 V. |
| 5 | NIC | unconnected | Not internally connected; the datasheet specifies no internal connection for this pin on the ADA4084-1 8-lead SOIC. |
| 6 | OUT | output | Amplifier output, which swings rail to rail; output short-circuit duration to GND is indefinite. |
| 7 | V+ | power_in | Positive supply; the amplifier is guaranteed to operate from +3 V to +30 V single supply or ±1.5 V to ±15 V split supply, with an absolute maximum supply of ±18 V. |
| 8 | NIC | unconnected | Not internally connected; the datasheet specifies no internal connection for this pin on the ADA4084-1 8-lead SOIC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 20 | 100 | µV | VSY = 3 V; SOIC package | 4 | |
| Offset Voltage | VOS | 200 | µV | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Offset Voltage Drift | Δt/ΔT | 0.5 | 1.75 | µV/°C | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | |
| Input Bias Current | IB | 140 | 250 | nA | VSY = 3 V | 4 | |
| Input Bias Current | IB | 400 | nA | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Input Offset Current | IOS | 5 | 25 | nA | VSY = 3 V | 4 | |
| Input Offset Current | IOS | 50 | nA | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Input Voltage Range | 0 | 3 | V | VSY = 3 V | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 64 | 88 | dB | VSY = 3 V; VCM = 0 V to 3 V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 60 | dB | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Large Signal Voltage Gain | AVO | 100 | 104 | dB | VSY = 3 V; RL = 2 kΩ, 0.5 V ≤ VOUT ≤ 2.5 V | 4 | |
| Large Signal Voltage Gain | AVO | 97 | dB | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Output Voltage High | VOH | 2.9 | 2.95 | V | VSY = 3 V; RL = 10 kΩ to VCM | 4 | |
| Output Voltage High | VOH | 2.8 | V | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Output Voltage High | VOH | 2.85 | 2.9 | V | VSY = 3 V; RL = 2 kΩ to VCM | 4 | |
| Output Voltage High | VOH | 2.7 | V | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Output Voltage Low | VOL | 10 | 20 | mV | VSY = 3 V; RL = 10 kΩ to VCM | 4 | |
| Output Voltage Low | VOL | 40 | mV | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Output Voltage Low | VOL | 20 | 30 | mV | VSY = 3 V; RL = 2 kΩ to VCM | 4 | |
| Output Voltage Low | VOL | 50 | mV | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Short-Circuit Current | ISC | -17 | 10 | mA | VSY = 3 V | 4 | |
| Power Supply Rejection Ratio | PSRR | 100 | 110 | dB | VSY = ±1.25 V to ±1.75 V | 4 | |
| Power Supply Rejection Ratio | PSRR | 90 | dB | −40°C ≤ TA ≤ +125°C | 4 | ||
| Supply Current per Amplifier | ISY | 0.565 | 0.65 | mA | VSY = 3 V; IOUT = 0 mA | 4 | |
| Supply Current per Amplifier | ISY | 0.95 | mA | VSY = 3 V; −40°C ≤ TA ≤ +125°C | 4 | ||
| Slew Rate | SR | 2 | 2.6 | V/µs | VSY = 3 V; RL = 2 kΩ | 4 | |
| Offset Voltage | VOS | 40 | 100 | µV | VSY = ±15 V; SOIC package | 6 | |
| Offset Voltage | VOS | 200 | µV | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Offset Voltage Drift | ΔVOS/ΔT | 0.5 | 1.75 | µV/°C | VSY = ±15 V | 6 | |
| Input Bias Current | IB | 140 | 250 | nA | VSY = ±15 V | 6 | |
| Input Bias Current | IB | 400 | nA | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Input Offset Current | IOS | 5 | 25 | nA | VSY = ±15 V | 6 | |
| Input Offset Current | IOS | 50 | nA | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Input Voltage Range | -15 | 15 | V | VSY = ±15 V | 6 | ||
| Common-Mode Rejection Ratio | CMRR | 106 | 124 | dB | VSY = ±15 V; VCM = ±14 V, −40°C ≤ TA ≤ +125°C | 6 | |
| Common-Mode Rejection Ratio | CMRR | 85 | dB | VSY = ±15 V; VCM = ±15 V | 6 | ||
| Common-Mode Rejection Ratio | CMRR | 80 | dB | VSY = ±15 V; VCM = ±15 V, −40°C ≤ TA ≤ +125°C | 6 | ||
| Large Signal Voltage Gain | AVO | 110 | 117 | dB | VSY = ±15 V; RL = 2 kΩ, −13.5 V ≤ VOUT ≤ +13.5 V | 6 | |
| Large Signal Voltage Gain | AVO | 105 | dB | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Output Voltage High | VOH | 14.85 | 14.9 | V | VSY = ±15 V; RL = 10 kΩ to VCM | 6 | |
| Output Voltage High | VOH | 14.8 | V | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Output Voltage High | VOH | 14.5 | 14.6 | V | VSY = ±15 V; RL = 2 kΩ to VCM | 6 | |
| Output Voltage High | VOH | 14 | V | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Output Voltage Low | VOL | -14.95 | -14.9 | V | VSY = ±15 V; RL = 10 kΩ to VCM | 6 | |
| Output Voltage Low | VOL | -14.8 | V | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Output Voltage Low | VOL | -14.9 | -14.8 | V | VSY = ±15 V; RL = 2 kΩ to VCM | 6 | |
| Output Voltage Low | VOL | -14.7 | V | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Short-Circuit Current | ISC | -30 | 30 | mA | VSY = ±15 V | 6 | |
| Power Supply Rejection Ratio | PSRR | 110 | 120 | dB | VSY = ±2 V to ±18 V | 6 | |
| Power Supply Rejection Ratio | PSRR | 105 | dB | −40°C ≤ TA ≤ +125°C | 6 | ||
| Supply Current per Amplifier | ISY | 0.625 | 0.75 | mA | VSY = ±15 V; IOUT = 0 mA | 6 | |
| Supply Current per Amplifier | ISY | 1.05 | mA | VSY = ±15 V; −40°C ≤ TA ≤ +125°C | 6 | ||
| Slew Rate | SR | 2.4 | 4.6 | V/µs | VSY = ±15 V; RL = 2 kΩ | 6 | |
| Supply Voltage | -18 | 18 | V | 7 | |||
| Differential Input Voltage | -0.6 | 0.6 | V | 7 | |||
| Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Operating Temperature Range | -40 | 125 | °C | 7 | |||
| Junction Temperature Range | -65 | 150 | °C | 7 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 121 | °C/W | 8-Lead SOIC_N (R-8); 4-layer JEDEC PCB, zero airflow | 7 | ||
| Thermal Resistance, Junction-to-Case | θJC | 43 | °C/W | 8-Lead SOIC_N (R-8); θJC measured on top of package | 7 |
CAD (KiCad official)
- Symbol:
ADA4084-1ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ada4084-1arz-etched.step/ada4084-1arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4084-1arz.step/ada4084-1arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (36 pp, sha256
0e3c4be74cdb8c60, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).