3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGH125-S02DCA-00
JUSHUO · Wire To Board Connector · JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal
GH125-S02DCA-00 from JUSHUO, in a JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUSHUO |
| Package | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (initial) | 20 | mΩ | Mated connector; measured between two terminals forming a closed loop (test 9.1) | 5 | |||
| Insulation resistance (initial) | 500 | MΩ | 100 V DC for 1 min between adjacent contacts and between contacts and enclosure, mated (test 9.2) | 5 | |||
| Contact resistance after heating test | 60 | mΩ | Mated; after +85℃±2℃ for 96 h, then 1-2 h normal environment (test 10.1) | 5 | |||
| Contact resistance after cold test | 60 | mΩ | Mated; after -25℃±2℃ for 96 h, then 1-2 h normal environment (test 10.2) | 5 | |||
| Insulation resistance after moisture resistance test | 60 | MΩ | After 40℃±2℃, 90-96% RH for 96 h (test 10.3) | 5 | |||
| Withstand voltage after moisture resistance test | 250 | V AC | 1 min; after 40℃±2℃, 90-96% RH for 96 h (test 10.3) | 5 | |||
| Contact resistance after temperature cycle | 60 | mΩ | Mated; after 5 cycles of -25℃ / room temp / +85℃ / room temp (test 10.4) | 6 | |||
| Contact resistance after salt spray test | 60 | mΩ | Mated; after 24 h continuous 5±1% NaCl spray (test 10.5) | 6 | |||
| Contact resistance after mechanical life test | 80 | mΩ | Unpowered; after 30 plug/unplug cycles at 10 times/min (test 11.3) | 8 | |||
| Pin fixing force | 5 | N | Single pin; pulled from pin holder at 25±3 mm/min (test 11.1) | 8 | |||
| Terminal retention force in plastic housing | 7 | N | Single terminal; pulled from housing at 25±3 mm/min (test 11.2) | 8 | |||
| Terminal crimp wire pull-out force, 26AWG | 17.8 | N | 26AWG wire; axial pull at 25±3 mm/min (test 11.4) | 8 | |||
| Terminal crimp wire pull-out force, 28AWG | 8.9 | N | 28AWG wire; axial pull at 25±3 mm/min (test 11.4) | 8 | |||
| Terminal crimp wire pull-out force, 30AWG | 4.4 | N | 30AWG wire; axial pull at 25±3 mm/min (test 11.4) | 8 | |||
| Terminal crimp wire pull-out force, 32AWG | 2.2 | N | 32AWG wire; axial pull at 25±3 mm/min (test 11.4) | 8 | |||
| Insertion force | 2 | N | Per pin; mating with housing lock removed, test speed 20±5 mm/min (test 11.5) | 8 | |||
| Pullout force | 0.3 | N | Per pin; housing lock removed, test speed 20±5 mm/min (test 11.5) | 8 | |||
| Rated voltage | 50 | V | Standard rating, rated voltage | 4 | |||
| Rated current | 1 | A | Standard rating, AC/DC | 4 | |||
| Operating temperature range | -25 | 85 | ℃ | Standard rating, operating temperature range | 4 | ||
| Operating humidity range | 90 | %RH | Standard rating, relative humidity below 90% | 4 | |||
| Storage temperature (packed connector) | -20 | 50 | ℃ | Storage of packaged connector, relative humidity not more than 90%, no corrosive gases | 4 | ||
| Transport temperature | -20 | 50 | ℃ | Transportation environment, avoid rain, snow and sunlight | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | 基座 base GH LCP E130i | 4 | |
| contacts | 磷铜 | 插针 pin GH 磷铜 Phosphor copper | 4 |
CAD (KiCad official)
- Symbol:
GH125-S02DCA-00 - Footprint:
Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal - 3D model: JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).