3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP65R46T-2402E
Microchip Tech · Comparators · SOT-23-6
MCP65R46T-2402E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Digital open-drain output of the MCP65R46, which requires an external pull-up resistor and can level-shift from 1.6V to 10V or be used in wired-OR logic. |
| 2 | VSS | power_in | Negative power supply (ground); VDD must be 1.8V to 5.5V higher than VSS. |
| 3 | VIN+ | power_in | Noninverting comparator input, a high-impedance CMOS input with low bias current and rail-to-rail range from VSS - 0.3V to VDD + 0.3V. |
| 4 | VIN- | power_in | Inverting comparator input, a high-impedance CMOS input with low bias current and rail-to-rail range from VSS - 0.3V to VDD + 0.3V. |
| 5 | VREF | power_in | Reference voltage output of 2.4V for the MCP65R46T-2402E variant (factory set, ±1% typical). |
| 6 | VDD | power_in | Positive power supply from 1.8V to 5.5V, needing a local 0.01 µF to 0.1 µF bypass capacitor within 2 mm of the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Operational Amplifier/Comparator |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current per Comparator | IQ | 2.5 | 4 | µA | IOUT = 0 | 3 | |
| Input Voltage Range | VCMR | -0.3 | V | VSS-0.3 to VDD+0.3 | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 55 | 70 | dB | VDD = 5V, VCM = -0.3V to 5.3V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 50 | 65 | dB | VDD = 5V, VCM = 2.5V to 5.3V | 3 | |
| Common-Mode Rejection Ratio (MCP65R46) | CMRR | 50 | 70 | dB | VDD = 5V, MCP65R46, VCM = -0.3V to 2.5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 63 | 80 | dB | VCM = VSS | 3 | |
| Input Offset Voltage | VOS | -10 | 3 | 10 | mV | VCM = VSS (Note 1) | 3 |
| Input Hysteresis Voltage | VHYST | 1 | 3.3 | 5 | mV | VCM = VSS (Note 1) | 3 |
| Input Bias Current | IB | 5000 | pA | TA = +125°C, VCM = VSS | 3 | ||
| Low-Level Output Voltage (Open Drain) | VOL | 0.2 | V | VSS+0.2 max; IOUT = 2 mA, VDD = 5.5V | 4 | ||
| High-Level Output Current (Open Drain) | IOH | -100 | nA | VPU = 10V | 4 | ||
| Pull-Up Voltage | VPU | 1.6 | 10 | V | Note 3 | 4 | |
| Initial Reference Tolerance | VTOL | -2 | 1 | 2 | % | IREF = 0A, VREF = 1.21V and 2.4V | 4 |
| Reference Voltage (2.4V) | VREF | 2.352 | 2.4 | 2.448 | V | IREF = 0A | 4 |
| Reference VREF Drift with Temperature | VREF/T | 23 | 100 | ppm | VREF = 2.4V, VDD = 5.5V | 4 | |
| Propagation Delay (High-to-Low) | tPHL | 4 | 8 | µs | Step = 200 mV, Overdrive = 100 mV, CL = 50 pF | 5 | |
| Propagation Delay (Low-to-High) | tPLH | 4 | 8 | µs | Step = 200 mV, Overdrive = 100 mV, CL = 50 pF | 5 | |
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Supply Voltage VDD - VSS | VDD - VSS | 7 | V | 3 | |||
| All other inputs and outputs | -0.3 | 0.3 | V | VSS, 0.3V to VDD + 0.3V | 3 | ||
| Output Short Circuit Current | -25 | 25 | mA | 3 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -50 | 50 | mA | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| Junction temperature | 150 | °C | 3 | ||||
| Thermal Resistance, SOT23-6 | θJA | 190.5 | °C/W | 5 | |||
| Input Offset Voltage Drift with Temperature | VOS/T | 10 | µV/°C | VCM = VSS | 3 | ||
| Short Circuit Current (Open Drain) | ISC | 50 | mA | VPU = VDD = 5.5V (±50 printed) | 4 | ||
| Reference Output Current | IREF | 500 | µA | VTOL = ±2% (maximum) (±500 printed) | 4 | ||
| Maximum Toggle Frequency | fMAX | 120 | kHz | VDD = 5.5V | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP65R46T-2402E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp65r46t-2402e-chy-etched.step/mcp65r46t-2402e-chy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp65r46t-2402e-chy.step/mcp65r46t-2402e-chy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (36 pp, sha256
3296c4e9fe54dddc, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).