component
GP9301B-F1K-D5V10-SW
Public Made by Adomby adom
Guestgood ADCs/DACs - Special Purpose, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP9301B-F1K-D5V10-SW
Guestgood · ADCs/DACs - Special Purpose · SOP-8
GP9301B-F1K-D5V10-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; left floating. |
| 2 | NC | unconnected | No connect; left floating. |
| 3 | VIN | power_in | Input for 0-10V analog voltage, PWM signal (high level >2.7V) or 100K resistor, with built-in 100uA pull-up current; input range -0.3V to VCC+0.3V. |
| 4 | VCC | power_in | Power supply, 10V to 40V (12V typical, 40V maximum). |
| 5 | GND | power_in | Ground. |
| 6 | PWM | output | PWM duty-cycle output with 5V high level, 0%-100% duty (DPWM = VIN/10V), 1Hz to 1MHz. |
| 7 | PWMB | output | Complementary (inverted) PWM output to PWM, with 5V high level. |
| 8 | V5V | power_out | Internal LDO 5V output, requires an external 10nF-22uF capacitor and can drive 10mA; on fast power cycling VCC must fall below 1.5V before restart. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | SOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC | VCC | 10 | 12 | 40 | V | 6 | |
| Input voltage VIN | VIN | 0 | 10 | V | footnote * | 6 | |
| Output low voltage | VOL | 0.8 | V | VCC @15.0V, IOL = 10 mA | 6 | ||
| Output high voltage | VOH | 4.2 | V | VCC @15.0V, IOL = 10 mA | 6 | ||
| V5V drive capability | IV5V | 10 | mA | VCC @15.0V | 6 | ||
| PWM duty cycle | Dpwm | 0 | 100 | % | note 2 (average duty cycle) | 6 | |
| PWM frequency error | ∆fpwm | -3 | 0 | 3 | % | 6 | |
| PWM duty cycle error | ∆Dpwm | 0.5 | 1 | % | 6 | ||
| PWM jitter | Jpwm | 0.1 | 0.2 | %p-p | note 3, measured at 1KHz PWM | 6 | |
| Output rise time | Tr | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 6 | |
| Output fall time | Tf | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 6 | |
| Input leakage current | IIL | 3 | μA | VIN = VCC or VSS | 6 | ||
| Supply current (power consumption) | ICC | 5 | mA | VCC @ 15.0V | 6 | ||
| Industrial operating temperature | -40 | 125 | ℃ | 2 | |||
| Storage temperature | -50 | 125 | ℃ | 2 | |||
| Input voltage (upper limit printed as VCC + 0.3 V) | -0.3 | V | 2 | ||||
| Maximum voltage | 40 | V | 2 | ||||
| ESD protection | 2000 | V | 2 | ||||
| Operating temperature (order suffix SW) | -40 | 85 | ℃ | SW suffix = SOP8 package, -40~85℃ operating temperature, per model description | 5 |
CAD (KiCad official)
- Symbol:
GP9301B-F1K-D5V10-SW - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp9301b-f1k-d5v10-sw-etched.step/gp9301b-f1k-d5v10-sw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp9301b-f1k-d5v10-sw.step/gp9301b-f1k-d5v10-sw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (15 pp, sha256
519110d8173baa1f, retrieved 2026-10-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).