Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC94069YML-TR

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · MLF-8

MIC94069YML-TR from Microchip Tech, in a MLF-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VINA power_in Source of the P-channel MOSFET for switch A; input supply range is 1.7V to 5.5V (absolute maximum +6V).
2 ENA input Active-high CMOS-compatible enable input for switch A with an active pull-down, which must not be left floating.
3 VINB power_in Source of the P-channel MOSFET for switch B; input supply range is 1.7V to 5.5V (absolute maximum +6V).
4 ENB input Active-high CMOS-compatible enable input for switch B, which must not be left floating.
5 VOUTB power_out Drain of the P-channel MOSFET for switch B, delivering the switched output to the load.
6 GND power_in Ground; the datasheet requires both GND pins to be connected to ground.
7 VOUTA power_out Drain of the P-channel MOSFET for switch A, delivering the switched output to the load.
8 GND power_in Ground; the datasheet requires both GND pins to be connected to ground.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MLF-8
Category Single Chip Microcomputer/Microcontroller
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Enable Threshold Voltage VEN_TH 0.5 1.2 V VIN = 1.8V to 4.5V, ID = -250µA 3
Enable Threshold Voltage VEN_TH 0.4 1.2 V VIN = 1.7V to 4.5V, ID = -250µA 3
Enable Input Current IEN 2 4 µA VIN = VEN = 5.5V 3
OFF State Leakage Current IVIN 1 µA VIN = +5.5V, VEN = 0V 3
P-Channel Drain to Source On Resistance RDS(ON) 85 115 mΩ VIN = +4.5V, ID = -100mA, VEN = 1.5V 3
P-Channel Drain to Source On Resistance RDS(ON) 100 140 mΩ VIN = +3.6V, ID = -100mA, VEN = 1.5V 3
P-Channel Drain to Source On Resistance RDS(ON) 145 200 mΩ VIN = +2.5V, ID = -100mA, VEN = 1.5V 3
P-Channel Drain to Source On Resistance RDS(ON) 155 215 mΩ VIN = +1.8V, ID = -100mA, VEN = 1.5V 3
P-Channel Drain to Source On Resistance RDS(ON) 165 225 mΩ VIN = +1.7V, ID = -100mA, VEN = 1.5V 3
Turn-off Impedance RSHUTDOWN 200 300 Ω VIN = +3.6V, ITEST = 1mA, VEN = 0V; MIC94067, 69 3
Turn-On Delay Time tON_DLY 700 1200 µs VIN = +3.6V, ID = -100mA, VEN = 1.5V; MIC94068, 69 3
Turn-On Rise Time tON_RISE 500 800 1500 µs VIN = +3.6V, ID = -100mA, VEN = 1.5V; MIC94068, 69 3
Turn-Off Delay Time tOFF_DLY 100 200 ns VIN = +3.6V, ID = -100mA, VEN = 1.5V; MIC94068, 69 3
Turn-Off Fall Time tOFF_FALL 60 100 ns VIN = +3.6V, ID = -100mA, VEN = 1.5V; MIC94068, 69 4
Input Voltage (VIN) VIN 1.7 5.5 V 3
Junction Temperature (TA) TA -40 125 °C 3
Input Voltage (VIN) VIN 6 V 3
Enable Voltage (VEN) VEN 6 V 3
Continuous Drain Current (ID) ID -2 2 A TA = 25°C 3
Continuous Drain Current (ID) ID -1.4 1.4 A TA = 85°C 3
Pulsed Drain Current (IDP) IDP -6 6 A Note 4: pulse width <300µs, <2% duty cycle 3
Continuous Diode Current (IS) IS -50 mA Note 4 3
Storage Temperature (Ts) Ts -55 150 °C 3
EDS Rating, HBM 4 kV HBM, Note 6 (1.5k in series with 100pF) 3
Package Thermal Resistance 2x2 MLF (ΘJA) ΘJA 90 °C/W 3
Package Thermal Resistance 2x2 MLF (ΘJC) ΘJC 45 °C/W Note 3: with backside thermal contact to PCB 3

CAD (KiCad official)

  • Symbol: MIC94069YML-TR
  • Footprint: Package_DFN_QFN:MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm
  • 3D model: MLF-8 (KiCad packages3D, STEP)
  • 3D model files: mic94069yml-tr-etched.step / mic94069yml-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic94069yml-tr.step / mic94069yml-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (10 pp, sha256 fa2069efe05a264c, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF