Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD7266BSUZ

Analog Devices · Analog To Digital Converters (ADCs) · TQFP-32(7x7)

AD7266BSUZ from Analog Devices, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DGND power_in Digital ground reference for all digital circuitry; must connect to the system DGND plane and be within 0.3 V of AGND even on transients.
2 REF SELECT input Logic input: tied to DGND selects the on-chip 2.5 V reference for both ADCs, tied high allows an external reference via DCAPA/DCAPB.
3 AVDD power_in Analog supply voltage, 2.7 V to 5.25 V, for all analog circuitry; within 0.3 V of DVDD and decoupled to AGND.
4 DCAPA passive Decoupling capacitor pin (470 nF recommended) for the ADC A reference buffer; also used to apply or take out a buffered reference.
5 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the system AGND plane.
6 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the system AGND plane.
7 VA1 input ADC A analog input 1, programmable as single-ended or part of a true differential pair.
8 VA2 input ADC A analog input 2, programmable as single-ended or part of a true differential pair.
9 VA3 input ADC A analog input 3, programmable as single-ended or part of a true differential pair.
10 VA4 input ADC A analog input 4, programmable as single-ended or part of a true differential pair.
11 VA5 input ADC A analog input 5, programmable as single-ended or part of a true differential pair.
12 VA6 input ADC A analog input 6, programmable as single-ended or part of a true differential pair.
13 VB6 input ADC B analog input 6, programmable as single-ended or part of a true differential pair.
14 VB5 input ADC B analog input 5, programmable as single-ended or part of a true differential pair.
15 VB4 input ADC B analog input 4, programmable as single-ended or part of a true differential pair.
16 VB3 input ADC B analog input 3, programmable as single-ended or part of a true differential pair.
17 VB2 input ADC B analog input 2, programmable as single-ended or part of a true differential pair.
18 VB1 input ADC B analog input 1, programmable as single-ended or part of a true differential pair.
19 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the system AGND plane.
20 DCAPB passive Decoupling capacitor pin (470 nF recommended) for the ADC B reference buffer; also used to apply or take out a buffered reference.
21 RANGE input Logic input selecting analog input range: low gives 0 V to VREF, high when CS goes low gives 2 × VREF.
22 SGL/DIFF input Logic input: low selects differential operation, high selects single-ended operation of the analog inputs.
23 A2 input Multiplexer select logic input (MSB of A2:A0) choosing the channel pair converted simultaneously; set up before the CS falling edge.
24 A1 input Multiplexer select logic input choosing the channel pair converted simultaneously; set up before the CS falling edge.
25 A0 input Multiplexer select logic input (LSB of A2:A0) choosing the channel pair converted simultaneously; set up before the CS falling edge.
26 CS input Active-low chip select that initiates conversions and frames the serial data transfer.
27 SCLK input Serial clock input for accessing data and also the clock source for the conversion process.
28 DOUTB output Serial data output of ADC B, MSB first, clocked out on SCLK falling edge with 14 SCLKs required to access the data.
29 DGND power_in Digital ground reference for all digital circuitry; must connect to the system DGND plane and be within 0.3 V of AGND even on transients.
30 DOUTA output Serial data output of ADC A, MSB first, clocked out on SCLK falling edge with 14 SCLKs required to access the data.
31 VDRIVE power_in Logic power supply input setting the interface voltage; decoupled to DGND and never more than 0.3 V above AVDD or DVDD.
32 DVDD power_in Digital supply voltage, 2.7 V to 5.25 V, for all digital circuitry; within 0.3 V of AVDD and decoupled to DGND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TQFP-32(7x7)
Category Data Converters
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SNR differential SNR 71 dB fIN = 50 kHz sine wave; differential mode 3
SNR single-ended/pseudo differential SNR 69 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
SINAD differential SINAD 70 dB fIN = 50 kHz sine wave; differential mode 3
SINAD single-ended/pseudo differential SINAD 68 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
THD differential THD -77 dB fIN = 50 kHz sine wave; differential mode 3
THD single-ended/pseudo differential THD -73 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
Spurious-Free Dynamic Range SFDR -75 dB fIN = 50 kHz sine wave 3
Aperture Delay 11 ns 3
Aperture Delay Matching 200 ps 3
Integral Nonlinearity differential INL -1 1 LSB differential mode 3
Integral Nonlinearity single-ended/pseudo differential INL -1.5 1.5 LSB single-ended and pseudo differential modes 3
Differential Nonlinearity differential DNL -0.99 0.99 LSB Differential mode 3
Differential Nonlinearity single-ended/pseudo differential DNL -0.99 1.5 LSB Single-ended and pseudo differential modes 3
Offset Error -7 7 LSB Straight binary output coding 3
Gain Error -2.5 2.5 LSB Straight binary output coding 3
Positive Gain Error -2 2 LSB Twos complement output coding 3
Zero Code Error -5 5 LSB Twos complement output coding 3
Negative Gain Error -2 2 LSB Twos complement output coding 3
Analog Input DC Leakage Current -1 1 μA 4
Reference Output Voltage tolerance -0.2 0.2 % @ 25°C 4
Reference Input Voltage Range 0.1 V upper limit VDD; see Typical Performance Characteristics section 4
Reference DC Leakage Current -2 2 μA External reference applied to Pin DCAPA/Pin DCAPB 4
Reference Temperature Coefficient 10 20 ppm/°C 4
Input High Voltage VINH 2.8 V 4
Input Low Voltage VINL 0.4 V 4
Output Low Voltage VOL 0.4 V 4
Floating State Leakage Current -1 1 μA 4
Track-and-Hold Acquisition Time VDD=5V 90 ns Full-scale step input; VDD = 5 V 4
Track-and-Hold Acquisition Time VDD=3V 110 ns Full-scale step input; VDD = 3 V 4
Throughput Rate 2 MSPS 4
Supply voltage VDD VDD 2.7 5.25 V 4
Logic supply voltage VDRIVE VDRIVE 2.7 5.25 V 4
IDD Normal Mode (Static) IDD 2.3 mA VDD = 5.25 V 4
IDD Operational fS = 2 MSPS IDD 5.7 6.4 mA VDD = 5.25 V 4
IDD Operational fS = 1.5 MSPS IDD 3.4 4 mA VDD = 3.6 V 4
IDD Partial Power-Down Mode IDD 500 μA Static 4
IDD Full Power-Down Mode IDD 1 μA TA = −40°C to +85°C 4
IDD Full Power-Down Mode hot IDD 2.8 μA TA > 85°C to 125°C 4
Power Dissipation Normal Mode (Operational) 33.6 mW VDD = 5.25 V 4
Power Dissipation Partial Power-Down (Static) 2.625 mW VDD = 5.25 V 4
Power Dissipation Full Power-Down (Static) 5.25 μW VDD = 5.25 V, TA = −40°C to +85°C 4
SCLK frequency fSCLK 1 32 MHz min 1 MHz for TA = −40°C to +85°C; min 4 MHz for TA > 85°C to 125°C 5
Quiet time tQUIET 30 ns Minimum time between end of serial read and next falling edge of CS 5
CS to DOUT three-state disabled delay t3 15 ns Delay from CS until DOUTA and DOUTB are three-state disabled 5
Data access time VDD=3V t4 36 ns Data access time after SCLK falling edge, VDD = 3 V 5
Data access time VDD=5V t4 27 ns Data access time after SCLK falling edge, VDD = 5 V 5
CS rising edge to falling edge pulse width t9 30 ns 5
VDD to AGND VDD -0.3 7 V 6
DVDD to DGND DVDD -0.3 7 V 6
Analog Input Voltage to AGND -0.3 V upper limit AVDD + 0.3 V 6
Digital Input Voltage to DGND -0.3 7 V 6
Input Current to Any Pin Except Supplies -10 10 mA Transient currents of up to 100 mA will not cause latch up 6
Operating Temperature Range -40 125 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature 150 °C 6
Reflow Temperature 255 °C 10 to 30 sec 6
θJA Thermal Impedance (TQFP) θJA 55 °C/W TQFP 6
Aperture Jitter 50 ps 3

CAD (KiCad official)

  • Symbol: AD7266BSUZ
  • Footprint: Package_QFP:TQFP-32_7x7mm_P0.8mm
  • 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: ad7266bsuz-etched.step / ad7266bsuz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7266bsuz.step / ad7266bsuz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 0af0b0543fc9c49d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF