component
HGV6024MT
Public Made by Adomby adom
HGSEMI Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHGV6024MT
HGSEMI · Operational Amplifier · TSSOP-14
HGV6024MT from HGSEMI, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output, rail-to-rail swing. |
| 2 | INA- | input | Amplifier A inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 3 | INA+ | input | Amplifier A non-inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 4 | VDD | power_in | Positive supply, 2.1V to 5.5V single supply (absolute max 7.5V between VDD and VSS); bypass with 0.1µF close to the pin. |
| 5 | INB+ | input | Amplifier B non-inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 6 | INB- | input | Amplifier B inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 7 | OUTB | output | Amplifier B output, rail-to-rail swing. |
| 8 | OUTC | output | Amplifier C output, rail-to-rail swing. |
| 9 | INC- | input | Amplifier C inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 10 | INC+ | input | Amplifier C non-inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 11 | VSS | power_in | Negative supply or ground reference; dual supplies of ±1.05V to ±2.75V are supported. |
| 12 | IND+ | input | Amplifier D non-inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 13 | IND- | input | Amplifier D inverting input; keep within VSS-0.1V to VDD+0.1V. |
| 14 | OUTD | output | Amplifier D output, rail-to-rail swing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage (VDD to Vss) | -0.5 | 7.5 | V | 3 | |||
| PDB Input Voltage | 7 | V | 3 | ||||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Junction Temperature | 160 | °C | 3 | ||||
| Storage Temperature Range | -55 | 150 | °C | 3 | |||
| Lead Temperature (soldering) | 245 | °C | soldering, 10 sec | 3 | |||
| ESD Susceptibility HBM | 8 | KV | HBM | 3 | |||
| ESD Susceptibility MM | 400 | V | MM | 3 | |||
| Input Offset Voltage (VOS) | VOS | 0.8 | 3.5 | mV | VS=5V, TA=+25°C, VCM=VS/2, RL=600Ω | 4 | |
| Input Offset Voltage (VOS) over temperature | VOS | 3.9 | mV | VS=5V, TA=0°C to 70°C, VCM=VS/2, RL=600Ω | 4 | ||
| Input Offset Voltage (VOS) over temperature | VOS | 4.3 | mV | VS=5V, TA=-40°C to 85°C, VCM=VS/2, RL=600Ω | 4 | ||
| Common Mode Rejection Ratio (CMRR) | CMRR | 65 | 82 | dB | VS=5.5V, VCM=-0.1V to 4V, TA=+25°C | 4 | |
| Common Mode Rejection Ratio (CMRR) over temperature | CMRR | 64 | dB | VS=5.5V, VCM=-0.1V to 4V, TA=0°C to 70°C | 4 | ||
| Common Mode Rejection Ratio (CMRR) | CMRR | 75 | dB | VS=5.5V, VCM=-0.1V to 5.6V | 4 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 80 | 90 | dB | RL=600Ω, VO=0.15V to 4.85V, TA=+25°C | 4 | |
| Open-Loop Voltage Gain (AOL) over temperature | AOL | 76 | dB | RL=600Ω, VO=0.15V to 4.85V, TA=0°C to 70°C | 4 | ||
| Open-Loop Voltage Gain (AOL) over temperature | AOL | 75 | dB | RL=600Ω, VO=0.15V to 4.85V, TA=-40°C to 85°C | 4 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 108 | dB | RL=10kΩ, VO=0.05V to 4.95V | 4 | ||
| Output Current (IOUT) | IOUT | 55 | 70 | mA | TA=+25°C | 4 | |
| Output Current (IOUT) over temperature | IOUT | 45 | mA | TA=0°C to 70°C | 4 | ||
| Output Current (IOUT) over temperature | IOUT | 42 | mA | TA=-40°C to 85°C | 4 | ||
| Operating Voltage Range | 2.1 | 5.5 | V | 4 | |||
| Power Supply Rejection Ratio (PSRR) | PSRR | 74 | dB | VS = +2.5V to +5.5V, VCM =(-VS) + 0.5 V, IOUT = 0, TA=+25°C | 4 | ||
| Power Supply Rejection Ratio (PSRR) over temperature | PSRR | 72 | dB | VS = +2.5V to +5.5V, VCM =(-VS) + 0.5 V, IOUT = 0, TA=0°C to 70°C | 4 | ||
| Quiescent Current/Amplifier (IQ) | IQ | 1.5 | mA | VS = +2.5V to +5.5V, VCM =(-VS) + 0.5 V, IOUT = 0, TA=+25°C | 4 | ||
| Quiescent Current/Amplifier (IQ) over temperature | IQ | 1.65 | mA | VS = +2.5V to +5.5V, VCM =(-VS) + 0.5 V, IOUT = 0, TA=0°C to 70°C | 4 | ||
| Quiescent Current/Amplifier (IQ) over temperature | IQ | 1.7 | mA | VS = +2.5V to +5.5V, VCM =(-VS) + 0.5 V, IOUT = 0, TA=-40°C to 85°C | 4 |
CAD (KiCad official)
- Symbol:
HGV6024MT - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
hgv6024mt-etched.step/hgv6024mt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hgv6024mt.step/hgv6024mt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (15 pp, sha256
ac5d5703f20fc025, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).