Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS2511QDGNQ1

Texas Instruments · Power Distribution Switches · MSOP-8-EP

TPS2511QDGNQ1 from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground connection.
2 ILIM_SET input External resistor (16.9 kΩ to 750 kΩ recommended) input for programming current-limit threshold.
3 IN power_in Supply voltage input 4.5 to 5.5 V, bypass with ≥0.1 µF capacitor to GND.
4 CS output Active-low open-drain current-sense output (max 10 mA sink), asserted when OUT current exceeds half of programmed limit.
5 EN input Logic enable input 0 to 5.5 V; high enables power switch, low disables switch and sets data lines to high impedance.
6 DP bidirectional Bidirectional data line for D+ or D- of USB connector DCP detection, ±10 mA continuous (max 35 mA), high impedance when disabled.
7 DM bidirectional Bidirectional data line for D- or D+ of USB connector DCP detection, ±10 mA continuous (max 35 mA), high impedance when disabled.
8 OUT output Power-switch output to USB VBUS for charging current delivery, 2.2 A continuous.
9 PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS2511QDGNQ1
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps2511qdgnq1-etched.step / tps2511qdgnq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2511qdgnq1.step / tps2511qdgnq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 a204181e0b97a899, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF