component
ADS8327IPWR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS8327IPWR
Texas Instruments · Analog To Digital Converters (ADC) · TSSOP-16
ADS8327IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VA | power_in | Analog supply, +2.7 V to +5.5 VDC. |
| 2 | RESERVED | unconnected | Reserved, connect to AGND or +VA. |
| 3 | +IN | input | Noninverting input. |
| 4 | −IN | input | Inverting input, usually connected to ground. |
| 5 | AGND | power_in | Analog ground. |
| 6 | REF− | input | Connect to AGND through individual via. |
| 7 | REF+ | input | External reference input. |
| 8 | NC | unconnected | No connection. |
| 9 | CONVST | input | Freezes sample and hold, starts conversion with next rising edge of internal clock. |
| 10 | EOC/INT/CDI | output | Status output, low during conversion if programmed as EOC (default), or low for preprogrammed duration after conversion if programmed as INT, with programmable polarity; can also function as chain data input (CDI) in daisy-chain mode. |
| 11 | FS/CS | input | Frame sync signal for TMS320 DSP serial interface or chip select input for SPI interface slave select (SS-). |
| 12 | SDI | input | Serial data in. |
| 13 | SDO | tri_state | Serial data out. |
| 14 | BDGND | power_in | Interface ground. |
| 15 | SCLK | input | Clock for serial interface. |
| 16 | +VBD | power_in | Interface supply, 1.65 V to 1.5×(+VA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ADS8327IPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ads8327ipwr-etched.step/ads8327ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8327ipwr.step/ads8327ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
47e2e3214da14360, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).