3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM25141QRGETQ1
Texas Instruments · DC-DC Converters · VQFN-24-EP(4x4)
LM25141QRGETQ1 from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DEMB | input | Diode emulation pin enabling diode emulation when connected to AGND, forced PWM mode when connected to VDDA, or external clock synchronization input. |
| 2 | VDDA | power_out | Internal analog bias regulator output requiring a capacitor connection from VDDA to AGND. |
| 3 | AGND | power_in | Analog ground connection providing ground return for internal voltage reference and analog circuits. |
| 4 | RT | input | Oscillator frequency adjustment pin using resistor-to-ground for frequency range 2.2 MHz (1.8-2.53 MHz) or 440 kHz (300-500 kHz), with analog voltage adjustment through resistor also supported. |
| 5 | DITH | output | Dither output charged and discharged with 20-µA current source modulating oscillator frequency between -5% and +5%, disabled by connecting to VDDA. |
| 6 | OSC | input | Frequency selection pin setting oscillator to 2.2 MHz when connected to VDDA or 440 kHz when connected to AGND. |
| 7 | LOL | output | Low-side gate driver turnoff output. |
| 8 | LO | output | Low-side gate driver turnon output. |
| 9 | PGND | power_in | Power ground connection pin for low-side NMOS gate driver. |
| 10 | VCC | power_in | VCC bias supply pin requiring a capacitor connection from VCC to PGND. |
| 11 | HB | power_in | High-side driver supply pin for bootstrap gate drive. |
| 12 | SW | passive | Switching node of the buck regulator connecting to bootstrap capacitor, source terminal of high-side MOSFET, and drain terminal of low-side MOSFET. |
| 13 | HO | output | High-side gate driver turnon output. |
| 14 | HOL | output | High-side gate driver turnoff output. |
| 15 | VIN | power_in | Supply voltage input source for VCC regulator, operating from 3.8 V to 42 V. |
| 16 | VCCX | power_in | Optional external bias supply input internally connected to VCC when above 4.5 V with internal regulator disabled; must be grounded if unused. |
| 17 | VOUT | input | Current sense amplifier input connected to output side of current sense resistor. |
| 18 | CS | input | Current sense amplifier input requiring low current Kelvin connection to inductor side of external current sense resistor. |
| 19 | FB | input | Feedback pin connected to VDDA for 3.3 V fixed output, to AGND for 5 V fixed output, or to output divider network for 1.5-15 V adjustable output with 1.2 V regulation threshold. |
| 20 | COMP | input | Output of the transconductance error amplifier. |
| 21 | PG | tri_state | Open-collector output switching low when VOUT is outside power good window. |
| 22 | SS | input | Soft-start programming pin with external capacitor and internal 20-µA current source setting ramp rate, turning off gate driver outputs when pulled below 80 mV. |
| 23 | EN | input | An active high logic input enabling the controller. |
| 24 | RES | output | Restart timer pin with external capacitor configuring hiccup mode current limiting, determining off-time before automatic restart after 512 consecutive PWM cycles with cycle-by-cycle current limiting. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | -0.3 | 47 | V | 5 | ||
| SW to PGND | -0.3 | 47 | V | 5 | |||
| SW to PGND (20-ns transient) | -5 | V | 20-ns transient | 5 | |||
| HB to SW | -0.3 | 6.5 | V | 5 | |||
| HB to SW (20-ns transient) | -5 | V | 20-ns transient | 5 | |||
| HO, HOL to SW | -0.3 | V | 5 | ||||
| HO, HOL to SW (20-ns transient) | -5 | V | 20-ns transient | 5 | |||
| LO, LOL to PGND | -0.3 | V | 5 | ||||
| LO, LOL to PGND (20-ns transient) | -1.5 | V | 20-ns transient | 5 | |||
| OSC, SS, COMP, RES, DEMB, RT, DITH | -0.3 | V | 5 | ||||
| EN to PGND | -0.3 | 47 | V | 5 | |||
| VCC, VCCX, VDD, PG, FB | -0.3 | 6.5 | V | 5 | |||
| VOUT, CS | -0.3 | 15.5 | V | 5 | |||
| PGND to AGND | -0.3 | 0.3 | V | 5 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input voltage | VIN | 3.8 | 42 | V | 6 | ||
| SW to PGND | -0.3 | 42 | V | 6 | |||
| HB to SW | -0.3 | 5 | 5.25 | V | 6 | ||
| HO, HOL to SW | -0.3 | V | 6 | ||||
| LO, LOL to PGND | -0.3 | 5 | 5.25 | V | 6 | ||
| FB, PG, OSC, SS, RES, DEMB, VCCX | -0.3 | 5 | V | 6 | |||
| EN to PGND | -0.3 | 42 | V | 6 | |||
| VCC, VDD | -0.3 | 5 | 5.25 | V | 6 | ||
| VOUT, CS | 1.5 | 5 | 15 | V | 6 | ||
| PGND to AGND | -0.3 | 0.3 | V | 6 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 34.1 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 12.1 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 2.9 | °C/W | 6 | |||
| Shutdown mode current | ISHUTDOWN | 10 | 12.5 | µA | VIN = 8–18 V, EN = 0 V, VCCX = 0 V | 6 | |
| Standby current | ISTANDBY | 35 | 45 | µA | EN = 5 V, FB = VDD, VOUT in regulation, no-load, not switching, DEMB = GND | 6 | |
| Standby current | ISTANDBY | 42 | 55 | µA | EN = 5 V, FB = 0 V, VOUT in regulation, no-load, not switching, VCCX = 5 V, DEMB = GND. | 6 | |
| VCC regulation voltage | VCC(REG) | 4.75 | 5 | 5.25 | V | VIN = 6–18 V, 0–75 mA, VCCX = 0 V | 6 |
| VCC undervoltage threshold | VCC(UVLO) | 3.25 | 3.4 | 3.55 | V | VCC rising, VCCX = 0 V | 6 |
| VCC sourcing current limit | ICC(LIM) | 85 | 125 | mA | VCCX = 0 V | 6 | |
| Internal bias supply power | VDDA(REG) | 4.75 | 5 | 5.25 | V | VCCX = 0 V | 7 |
| VDDA undervoltage threshold (VCC rising) | VDDA(UVLO) | 3.1 | 3.2 | 3.3 | V | VCC rising, VCCX = 0 V | 7 |
| VCCX on threshold | VCCX(ON) | 4.1 | 4.3 | 4.4 | V | VCC rising | 7 |
| Current limit threshold | V(CS) | 68 | 75 | 82 | mV | ILSET = VDDA, measure from CS to VOUT | 7 |
| Current-sense amplifier gain | 11.4 | 12 | 12.6 | V/V | 7 | ||
| 3.3 V output voltage regulation | 3.273 | 3.3 | 3.327 | V | VIN = 3.8–42 V | 7 | |
| 5 V output voltage regulation | 4.96 | 5 | 5.04 | V | VIN = 5.5–42 V | 7 | |
| Regulated feedback voltage | 1.193 | 1.2 | 1.207 | V | 7 | ||
| Transconductance gain, feedback to COMP | Gm | 1010 | 1200 | µS | Feedback to COMP | 7 | |
| PG undervoltage trip level | PG(UV) | 90 | 92 | 94 | % | Falling with respect to the regulation voltage | 7 |
| PG overvoltage trip level | PG(OVP) | 108 | 110 | 112 | % | Rising with respect to the regulation voltage | 7 |
| Soft-start current | ISS | 16 | 22 | 28 | µA | 8 | |
| HO off to LO on dead time | tdly1 | 20 | 40 | ns | 8 | ||
| LO off to HO on dead time | tdly2 | 20 | 38 | ns | 8 | ||
| DEMB input low-frequency range | 350 | 550 | kHz | 440 kHz | 8 | ||
| DEMB input high-frequency range | 1800 | 2600 | kHz | 2.2 MHz | 8 | ||
| Oscillator frequency 2.2 MHz | 2100 | 2200 | 2300 | kHz | OSC = VDDA, VIN = 8–18 V | 9 | |
| Oscillator frequency 440 kHz | 420 | 440 | 460 | kHz | OSC = GND, VIN = 8–18 V | 9 | |
| RT adjustment range 2.2 MHz, minimum | RT | 1710 | 1800 | 1890 | kHz | OSC = VDD, RTMIN = 61.9 kΩ | 9 |
| RT adjustment range 2.2 MHz, typical | RT | 2100 | 2200 | 2300 | kHz | OSC = VDD, RTTYP = 49.9 kΩ | 9 |
| RT adjustment range 2.2 MHz, maximum | RT | 2405 | 2530 | 2655 | kHz | OSC = VDD, RTMAX = 43.2 kΩ | 9 |
| RT adjustment range 440 kHz, minimum | RT | 285 | 300 | 315 | kHz | OSC = GND, RTMIN = 73.2 k | 9 |
| RT adjustment range 440 kHz, typical | RT | 420 | 440 | 460 | kHz | OSC = GND, RTTYP = 49.9 kΩ | 9 |
| RT adjustment range 440 kHz, maximum | RT | 475 | 500 | 525 | kHz | OSC = GND, RTMAX = 44.2 kΩ | 9 |
CAD (KiCad official)
- Symbol:
LM25141QRGETQ1 - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm25141qrgetq1-etched.step/lm25141qrgetq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm25141qrgetq1.step/lm25141qrgetq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
4e8600680b2accdb, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).