component
TSV911ILT
Public Unreviewedby Ray
UMW Operational Amplifier, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Contents
README
markdownTSV911ILT
UMW · Operational Amplifier · SOT-23-5
TSV911ILT from UMW, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Op-amp output. Rail-to-rail output; high-level swing within ~15 mV of VCC+ into 10 kΩ (45 mV into 600 Ω). Sink/source current up to ~35 mA. |
| 2 | VCC- | power_in | Negative supply / ground rail. Total supply (VCC+ − VCC-) is 2.5 V to 5.5 V; typically tied to GND in single-supply operation. |
| 3 | IN+ | input | Non-inverting op-amp input. Common-mode input range extends rail-to-rail from (VCC-)−0.1 V to (VCC+)+0.1 V. Input bias current 1 pA typ. |
| 4 | IN- | input | Inverting op-amp input. Common-mode input range extends rail-to-rail from (VCC-)−0.1 V to (VCC+)+0.1 V. Input bias current 1 pA typ. |
| 5 | VCC+ | power_in | Positive supply pin. 2.5 V to 5.5 V single-supply operation (2.3 V to 5.5 V at 0 °C to 125 °C). Absolute max supply voltage 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TSV911ILTTSV911ILTRILT
CAD (KiCad official)
- Symbol:
TSV911ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tsv911ilt.step |
85 KB | You want the bare part, or you mark your own boards. |
tsv911ilt-etched.step |
1.3 MB | You want the part with TSV911ILT already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 346 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (19 pp, sha256
d61d4009d5b8915e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).