3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18LF2550-I
Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil
PIC18LF2550-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RE3 when MCLR is disabled via the MCLRE configuration bit. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O (TTL) or analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O (TTL) or analog input 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or analog comparator reference output. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3, or A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/C1OUT/RCV | bidirectional | PORTA digital I/O (Schmitt Trigger), Timer0 external clock input, comparator 1 output, or external USB transceiver RCV input. |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA digital I/O, analog input 4, SPI slave select input, High/Low-Voltage Detect input, or comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, CLKO (1/4 the OSC1 frequency, denoting the instruction cycle rate) in select modes, or general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2/UOE | bidirectional | PORTC digital I/O, Timer1 oscillator input, Capture 2 input/Compare 2 output/PWM2 output (default CCP2 pin), or external USB transceiver OE output. |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output. |
| 14 | VUSB | power_out | Internal USB 3.3V voltage regulator output, positive supply for the internal USB transceiver. |
| 15 | RC4/D-/VM | bidirectional | Digital input, USB differential minus line (input/output), or external USB transceiver VM input. |
| 16 | RC5/D+/VP | bidirectional | Digital input, USB differential plus line (input/output), or external USB transceiver VP input. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock. |
| 18 | RC7/RX/DT/SDO | bidirectional | PORTC digital I/O, EUSART asynchronous receive, EUSART synchronous data, or SPI data out. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; LF devices operate over a VDD range of 2.0V to 5.5V. |
| 21 | RB0/AN12/INT0/FLT0/SDI/SDA | bidirectional | PORTB digital I/O with weak pull-up, analog input 12, external interrupt 0, PWM fault input, SPI data in, or I2C data I/O. |
| 22 | RB1/AN10/INT1/SCK/SCL | bidirectional | PORTB digital I/O with weak pull-up, analog input 10, external interrupt 1, or SPI/I2C synchronous serial clock input/output. |
| 23 | RB2/AN8/INT2/VMO | bidirectional | PORTB digital I/O with weak pull-up, analog input 8, external interrupt 2, or external USB transceiver VMO output. |
| 24 | RB3/AN9/CCP2/VPO | bidirectional | PORTB digital I/O with weak pull-up, analog input 9, alternate CCP2 pin (when CCP2MX is cleared), or external USB transceiver VPO output. |
| 25 | RB4/AN11/KBI0 | bidirectional | PORTB digital I/O with weak pull-up, analog input 11, or interrupt-on-change pin. |
| 26 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O with weak pull-up, interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD range (LF device) | VDD | 2 | 5.5 | V | Low-voltage parts designated LF (such as PIC18LF2550) | 10 | |
| Internal oscillator (INTOSC) accuracy | -2 | 2 | % | 8 MHz clock (±2% accuracy) | 9 |
CAD (KiCad official)
- Symbol:
PIC18LF2550-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf2550-i-etched.step/pic18lf2550-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf2550-i.step/pic18lf2550-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (438 pp, sha256
89dc5b86edd4804e, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).