Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

L6981N33DR

STMicroelectronics · DC-DC Converters · SO-8

L6981N33DR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching node that drives the external LC output filter; oscillates between near-VIN and near-GND at 360 to 440 KHz switching frequency.
2 BOOT passive Bootstrap capacitor connection; connect 100 nF capacitor between BOOT and SW to supply gate drive charge to internal high-side NMOS.
3 VCC power_in Power supply for internal analog circuitry; connect ceramic capacitor (≥ 1 µF) to AGND for filtering; regulated to 3.0 to 3.6 V.
4 VOUT/FB output Output voltage sensing pin; for N33DR variant this is VOUT with internal voltage divider set to 3.3 V fixed output.
5 EN/CLKIN input Enable control pin with rising threshold 1.08 to 1.32 V and falling threshold 1.0 V; also accepts external clock input (200 to 500 KHz) for synchronization in LNM mode.
6 AGND power_in Analog ground reference for internal signal processing and voltage sensing circuits.
7 VIN power_in DC input voltage pin with operating range 3.5 to 38 V; supplies power to internal switches and analog circuits.
8 PGND power_in Power ground connection for output power stage and switching circuits.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage range VIN 3.5 38 V 6
VCC rising threshold VINH 2.3 3.3 V 6
VCC UVLO falling threshold VINL 2.15 3.15 V 6
Peak current limit IPK 2 2.3 A No slope contribution 6
Peak current limit IPK 1.55 1.8 A Full slope contribution 6
Valley current limit IVY 1.7 2 2.3 A 6
Reverse current limit IVY_SINK 1.25 1.5 1.75 A LNM or VOUT overvoltage 6
Switching frequency FSW 360 400 440 KHz 6
EN enable threshold rising VEN 1.08 1.2 1.32 V Rising 6
VCC LDO output voltage 3 3.3 3.6 V 6
Shutdown current from VIN ISHTDWN 2 3 μA EN = GND 6
Quiescent current from VIN (LNM device) IQ_VIN 300 550 800 μA Fix VOUT part number 6
Quiescent current from VOUT (LNM device) IQ_VOUT 1.3 1.8 2.3 mA Fix VOUT part number 6
Internal soft-start TSS 1 1.3 1.6 ms 6
Voltage feedback, fixed 3.3 V version VFB 3.27 3.3 3.33 V TJ = 25 °C 6
Voltage feedback, fixed 3.3 V version VFB 3.284 3.3 3.346 V TJ = -40 °C ≤ TJ ≤ 125 °C 7
Overvoltage trip (VOVP/VREF) VOVP 115 120 125 % 7
Overvoltage hysteresis VOVP_HYST 1 2 6 % 7
Synchronization range (LNM only) fCLKIN 200 500 KHz 7
Input voltage (absolute maximum) VIN -0.3 42 V Maximum pin voltage 5
PGND to AGND maximum pin voltage -0.3 0.3 V Maximum pin voltage 5
VOUT/FB maximum pin voltage -0.3 8 V Maximum pin voltage 5
SW maximum pin voltage -0.85 V Maximum pin voltage; max printed as VIN + 0.3 V 5
SW maximum pin voltage -3.9 V for 0.5 ns; max printed as VIN + 0.3 V 5
Operating temperature range TJ -40 150 °C 5
Storage temperature range TSTG -65 150 °C 5
Thermal resistance junction ambient RthJA 65 °C/W Device soldered on the STMicroelectronics 2-layer 2-oz Cu demonstration board 5

CAD (KiCad official)

  • Symbol: L6981N33DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: l6981n33dr-etched.step / l6981n33dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6981n33dr.step / l6981n33dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (52 pp, sha256 ffbb8bf9e87b0957, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF