3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL2515
XINLUDA · CAN ICs · SOP-18-300mil
XL2515 from XINLUDA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXCAN | output | Transmit output pin to the CAN bus. |
| 2 | RXCAN | input | Receive input pin from the CAN bus. |
| 3 | CLKOUT | output | Clock output pin with a programmable prescaler that divides FOSC by 1, 2, 4 or 8, with Start-of-Frame signal as the alternate function. |
| 4 | TX0RTS | input | Request-to-Send input for transmit buffer TXB0, or a general purpose digital input, with a 100 k internal pull-up to VDD. |
| 5 | TX1RTS | input | Request-to-Send input for transmit buffer TXB1, or a general purpose digital input, with a 100 k internal pull-up to VDD. |
| 6 | TX2RTS | input | Request-to-Send input for transmit buffer TXB2, or a general purpose digital input, with a 100 k internal pull-up to VDD. |
| 7 | OSC2 | output | Oscillator output for the crystal or ceramic resonator connected to OSC1 and OSC2. |
| 8 | OSC1 | input | Oscillator input, also usable as an external clock input. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | RX1BF | output | Receive buffer RXB1 interrupt pin, or a general purpose digital output. |
| 11 | RX0BF | output | Receive buffer RXB0 interrupt pin, or a general purpose digital output. |
| 12 | INT | output | Interrupt output pin. |
| 13 | SCK | input | Clock input pin for the SPI interface. |
| 14 | SI | input | Data input pin for the SPI interface. |
| 15 | SO | output | Data output pin for the SPI interface. |
| 16 | CS | input | Chip select input pin for the SPI interface. |
| 17 | RESET | input | Active-low device Reset input. |
| 18 | VDD | power_in | Positive supply for logic and I/O pins; the device operates from 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-18-300mil |
| Category | Interface ICs |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (absolute maximum) | VDD | 6.5 | V | 69 | |||
| All inputs and outputs w.r.t. Vss (absolute maximum, lower bound) | VSS | -0.6 | V | 69 | |||
| Storage temperature | TST | -65 | 150 | ℃ | 69 | ||
| Ambient temperature with power applied (Industrial column) | TATPA | -40 | 105 | ℃ | Industrial; printed as +105/125, Extended (Q) 125 ℃ not applicable to this MPN | 69 | |
| Soldering temperature of leads | TSTL | 300 | ℃ | 10 seconds | 69 | ||
| Supply voltage | VDD | 2.7 | 5.5 | V | 70 | ||
| Register retention voltage | VRET | 2.4 | V | 70 | |||
| High-level input voltage, RXCAN pin (minimum) | VIH | 2 | V | 70 | |||
| Low-level input voltage, RXCAN and TXnRTS pins (minimum) | VIL | -0.3 | V | 70 | |||
| Low-level input voltage, SCK, CS, SI pins (minimum) | VIL | -0.3 | V | 70 | |||
| Low-level output voltage, TXCAN pin | VOL | 0.6 | V | IOL = +6.0 mA, VDD = 4.5V | 70 | ||
| Low-level output voltage, RXnBF pin | VOL | 0.6 | V | IOL = +8.5 mA, VDD = 4.5V | 70 | ||
| Low-level output voltage, SO and CLKOUT pins | VOL | 0.6 | V | IOL = +2.1 mA, VDD = 4.5V | 70 | ||
| Low-level output voltage, INT pin | VOL | 0.6 | V | IOL = +1.6 mA, VDD = 4.5V | 70 | ||
| Input leakage current, all I/Os except OSC1 and TXnRTS pins | ILI | -1 | 1 | µA | CS = RESET = VDD, VIN = VSS to VDD | 70 | |
| Input leakage current, OSC1 pin | ILI | -5 | 5 | µA | 70 | ||
| Internal capacitance (all inputs and outputs) | CINT | 10 | pF | TAMB = +25°C, fC = 1.0 MHz, VDD = 0V (Note 1) | 70 | ||
| Operating current | IDD | 10 | mA | VDD = 5.5V, FOSC = 25 MHz, FCLK = 1 MHz, SO = Open | 70 | ||
| Standby current (Sleep mode), Industrial | IDDS | 5 | µA | CS, TXnRTS = VDD, inputs tied to VDD or VSS, -40°C to +85°C | 70 | ||
| Clock in frequency | FOSC | 1 | 40 | MHz | VDD = 4.5V to 5.5V | 71 | |
| Clock in frequency | FOSC | 1 | 25 | MHz | VDD = 2.7V to 5.5V | 71 | |
| Clock in period | TOSC | 25 | 1000 | ns | VDD = 4.5V to 5.5V | 71 | |
| Clock in period | TOSC | 40 | 1000 | ns | VDD = 2.7V to 5.5V | 71 | |
| Duty cycle (external clock input) | TDUTY | 0.45 | 0.55 | TOSH/(TOSH + TOSL) | external clock input | 71 | |
| Wake-up noise filter | TWF | 100 | ns | 71 | |||
| RESET pin low time | tRL | 10 | µs | 71 | |||
| CLKOUT pin high time | thCLKOUT | 15 | ns | TOSC = 40 ns (Note 1) | 72 | ||
| CLKOUT pin low time | tlCLKOUT | 15 | ns | TOSC = 40 ns (Note 1) | 72 | ||
| CLKOUT pin rise time | trCLKOUT | 5 | ns | Measured from 0.3 VDD to 0.7 VDD (Note 1) | 72 | ||
| CLKOUT pin fall time | tfCLKOUT | 5 | ns | Measured from 0.7 VDD to 0.3 VDD (Note 1) | 72 | ||
| CLKOUT propagation delay | tdCLKOUT | 100 | ns | Note 1 | 72 | ||
| Ambient temperature range (Industrial, ordering table) | TAMB | -40 | 105 | ℃ | XL2515 SOP18 Industrial, per ordering information | 76 | |
| Clock frequency (SPI) | FCLK | 10 | MHz | 73 | |||
| CS setup time | TCSS | 50 | ns | 73 | |||
| CS hold time | TCSH | 50 | ns | 73 | |||
| CS disable time | TCSD | 50 | ns | 73 | |||
| Data setup time | TSU | 10 | ns | 73 | |||
| Data hold time | THD | 10 | ns | 73 | |||
| Clock rise time | TR | 2 | µs | Note 1 | 73 | ||
| Clock fall time | TF | 2 | µs | Note 1 | 73 | ||
| Clock high time | THI | 45 | ns | 73 | |||
| Clock low time | TLO | 45 | ns | 73 | |||
| Clock delay time | TCLD | 50 | ns | 73 | |||
| Clock enable time | TCLE | 50 | ns | 73 | |||
| Output valid from clock low | TV | 45 | ns | 73 | |||
| Output hold time | THO | 0 | ns | 73 | |||
| Output disable time | TDIS | 100 | ns | 73 |
CAD (KiCad official)
- Symbol:
XL2515 - Footprint:
Package_SO:SOP-18_7.495x11.515mm_P1.27mm - 3D model: SOP-18-300mil, generated on the KiCad land (body 7.49 x 11.53 mm, terminals on the pads, 2.5 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl2515-etched.step/xl2515-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2515.step/xl2515.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (76 pp, sha256
0034edeb9a204ca2, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).