3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGH125-S02CCA-00
JUSHUO · Wire To Board Connector · JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical
GH125-S02CCA-00 from JUSHUO, in a JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUSHUO |
| Package | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance | 20 | mΩ | Connector mated; measured across the two terminals (initial) | 5 | |||
| Insulation resistance | 500 | MΩ | 100 V DC applied between adjacent contacts and between contacts and enclosure, 1 min | 5 | |||
| Rated voltage | 50 | V | 4 | ||||
| Rated current | 1 | A | AC/DC | 4 | |||
| Operating temperature range | -25 | 85 | ℃ | 4 | |||
| Operating humidity range | 90 | % | Relative humidity | 4 | |||
| Contact resistance after heating test | 60 | mΩ | +85℃±2℃, 96 h, then 1-2 h at normal ambient | 5 | |||
| Contact resistance after cold test | 60 | mΩ | -25℃±2℃, 96 h, then 1-2 h at normal ambient | 5 | |||
| Insulation resistance after moisture resistance test | 60 | MΩ | 40℃±2℃, RH 90-96%, 96 h | 5 | |||
| Withstand voltage after moisture resistance test | 250 | V AC | 40℃±2℃, RH 90-96%, 96 h; 250 V AC for 1 minute | 5 | |||
| Contact resistance after temperature cycle | 60 | mΩ | -25℃ to +85℃, 5 cycles | 6 | |||
| Contact resistance after salt spray test | 60 | mΩ | 5% NaCl solution, continuous spray 24 h | 6 | |||
| Contact resistance after mechanical life test | 80 | mΩ | Unpowered; 30 insertion/removal cycles at 10 times/min | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | 基座 base GH LCP E130i | 4 | |
| contacts | 磷铜 | 插针 pin GH 磷铜 Phosphor copper | 4 |
CAD (KiCad official)
- Symbol:
GH125-S02CCA-00 - Footprint:
Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical - 3D model: JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).