component

HV1A337M0607PZ

Public Made by Adom

by adom

Honor Elec Polymer Aluminum Capacitors, SMD,D6.3xL7.7mm. Polarised capacitor: pin 1 is + by the KiCad polarised-footprint convention, KiCad symbol/footprint/3D.

componentcapacitorshv1a337m0607pzfactory-2.0.0extractor-text

Verified HV1A337M0607PZ

by Ray · last 12 Nov 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

12 Nov 2026RaySupersedes the earlier record: that check missed polarity (the pins said "unpolarised"; this capacitor is polarised): component-page-verify now PASSESfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: HV1A337M0607PZ · CP_Elec_6.3x7.7 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: two-terminal part whose datasheet prints no pin numbers: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_6.3x7.7
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-kytgxuiy/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 26 kB, viewers/symbol.html 6 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ hv1a337m0607pz.kicad_sym✓ hv1a337m0607pz.kicad_mod✓ hv1a337m0607pz.step
6 Nov 2026RayPublished by the parts factory: tier lcsc, 2 pinssuperseded
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: HV1A337M0607PZ · CP_Elec_6.3x7.7 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: unpolarised two-terminal part: pins 1 and 2 by library convention, no names to check
  • •distributor (warn): no ['digikey', 'mouser'] number
  • ✓family: CP_Elec_6.3x7.7
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-wwmizgc0/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ hv1a337m0607pz.kicad_sym✓ hv1a337m0607pz.kicad_mod✓ hv1a337m0607pz.step
Retired by Ray on 11 Nov 2026: Retired: this check called a polarised capacitor an unpolarised two-terminal part. Fixed in component-page-verify 0.5.13 (an unrecorded polarity now fails) and 0.5.14 (the datasheet row no longer says unpolarised).
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HV1A337M0607PZ

Honor Elec · Polymer Aluminum Capacitors · CP_Elec_6.3x7.7

HV1A337M0607PZ from Honor Elec, in a CP_Elec_6.3x7.7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 + passive Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end).
2 - passive Negative terminal.

Key specifications

Parameter Value
Manufacturer Honor Elec
Package CP_Elec_6.3x7.7
Category Capacitors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Leakage current (max) LC 660 µA +20°C, 2 minutes after rated voltage applied 2
Dissipation factor tanδ (max) tanδ 0.12 20°C, 120 Hz 2
ESR (max) ESR 32 mΩ 20°C, 100 kHz 2
Rated ripple current (max) RC 2350 mArms 105°C, 100 kHz 2
Capacitance tolerance -20 20 % 120 Hz, +20°C 1
Operating temperature range -55 105 °C 1
Surge voltage 11.5 V 105°C, surge test through 1000 Ω series resistor, 1000 cycles 11
Capacitance change after endurance -20 20 % 105°C, 2000 h at rated voltage, vs initial value 11
ESR after endurance ESR 150 % 105°C, 2000 h at rated voltage, % of specified value 11
Dissipation factor after endurance tanδ 150 % 105°C, 2000 h at rated voltage, % of specified value 11
ESR ratio Z(-55°C)/Z(20°C) Z 2.5 Low-temperature step, -55°C vs 20°C 12
ESR ratio Z(+105°C)/Z(20°C) Z 1.25 High-temperature step, +105°C vs 20°C 12
Leakage current ratio at 105°C LC 12.5 LC(105°C)/LC(SPEC), initial specified value 12
Capacitance change after vibration -5 5 % Vibration 10-55 Hz, 0.75 mm amplitude, vs initial value 13
Capacitance change after solder heat -5 5 % Solder heat resistance test, vs initial value 14
Reflow peak temperature 255 °C Lead-free reflow, peak ≤30 s; preheat 170-200°C ≤90 s 14
Nominal capacitance C 330 µF 120 Hz, +20°C 2
Rated voltage 10 V 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin pins have no broken and loose 12> 可焊性试验 Solderability test 焊料： 约 25%松香/乙醇溶液，焊料 Sn-Ag-Cu 13

CAD (KiCad official)

  • Symbol: HV1A337M0607PZ
  • Footprint: Capacitor_SMD:CP_Elec_6.3x7.7
  • 3D model: CP_Elec_6.3x7.7 (KiCad packages3D, STEP)
  • 3D model files: hv1a337m0607pz-etched.step / hv1a337m0607pz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv1a337m0607pz.step / hv1a337m0607pz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Honor Elec datasheet (20 pp, sha256 86964f0a7151ff28, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF