Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74LVC821ADBR

Texas Instruments · Flip Flops · SSOP-24

SN74LVC821ADBR from Texas Instruments, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Active-low buffered output enable; a high level places the ten 3-state outputs in the high-impedance state without affecting the latch operation.
2 1D input Data input of flip-flop 1, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
3 2D input Data input of flip-flop 2, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
4 3D input Data input of flip-flop 3, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
5 4D input Data input of flip-flop 4, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
6 5D input Data input of flip-flop 5, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
7 6D input Data input of flip-flop 6, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
8 7D input Data input of flip-flop 7, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
9 8D input Data input of flip-flop 8, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
10 9D input Data input of flip-flop 9, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
11 10D input Data input of flip-flop 10, sampled on the positive transition of CLK; inputs accept voltages up to 5.5 V.
12 GND power_in Device ground reference; continuous current through VCC or GND is limited to ±100 mA.
13 CLK input Clock input; flip-flops are edge-triggered on the positive transition with a maximum clock frequency of 150 MHz.
14 10Q tri_state 3-state output of flip-flop 10 with continuous output current limited to ±50 mA.
15 9Q tri_state 3-state output of flip-flop 9 with continuous output current limited to ±50 mA.
16 8Q tri_state 3-state output of flip-flop 8 with continuous output current limited to ±50 mA.
17 7Q tri_state 3-state output of flip-flop 7 with continuous output current limited to ±50 mA.
18 6Q tri_state 3-state output of flip-flop 6 with continuous output current limited to ±50 mA.
19 5Q tri_state 3-state output of flip-flop 5 with continuous output current limited to ±50 mA.
20 4Q tri_state 3-state output of flip-flop 4 with continuous output current limited to ±50 mA.
21 3Q tri_state 3-state output of flip-flop 3 with continuous output current limited to ±50 mA.
22 2Q tri_state 3-state output of flip-flop 2 with continuous output current limited to ±50 mA.
23 1Q tri_state 3-state output of flip-flop 1 with continuous output current limited to ±50 mA.
24 VCC power_in Supply voltage pin; operating range is 1.65 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-24
Category Logic
Pins 24

CAD (KiCad official)

  • Symbol: SN74LVC821ADBR
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24 (KiCad packages3D, STEP)
  • 3D model files: sn74lvc821adbr-etched.step / sn74lvc821adbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lvc821adbr.step / sn74lvc821adbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 21c0d871fce0b9d0, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF