3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownZL40212LDG1
Microchip Tech · Clock Buffers, Drivers · QFN-16-EP(3x3)
ZL40212LDG1 from Microchip Tech, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | clk_p | input | Differential (or single-ended) clock input; the datasheet refers to the Clock Inputs section for all supported input signal configurations. |
| 2 | NC | unconnected | No connection; leave unconnected. |
| 3 | NC | unconnected | No connection; leave unconnected. |
| 4 | clk_n | input | Differential (or single-ended) clock input; the datasheet refers to the Clock Inputs section for all supported input signal configurations. |
| 5 | gnd | power_in | Ground, 0 V. |
| 6 | NC | unconnected | No connection; leave unconnected. |
| 7 | NC | unconnected | No connection; leave unconnected. |
| 8 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.5 V ±5% or 3.3 V ±5% per the operating conditions). |
| 9 | out1_n | output | LVDS differential output (complement of out1_p); the datasheet describes the outputs as precision LVDS drivers. |
| 10 | out1_p | output | LVDS differential output (true of out1 pair); the datasheet describes the outputs as precision LVDS drivers. |
| 11 | out0_n | output | LVDS differential output (complement of out0_p); the datasheet describes the outputs as precision LVDS drivers. |
| 12 | out0_p | output | LVDS differential output (true of out0 pair); the datasheet describes the outputs as precision LVDS drivers. |
| 13 | vdd | power_in | Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.5 V ±5% or 3.3 V ±5% per the operating conditions). |
| 14 | NC | unconnected | No connection; leave unconnected. |
| 15 | NC | unconnected | No connection; leave unconnected. |
| 16 | gnd | power_in | Ground, 0 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD_R | -0.5 | 4.6 | V | 15 | ||
| Voltage on any digital pin (absolute maximum) | VPIN | -0.5 | V | Maximum printed as VDD | 15 | ||
| Storage temperature | TST | -55 | 125 | °C | 15 | ||
| Soldering temperature | T | 260 | °C | 15 | |||
| Junction temperature | Tj | 125 | °C | 15 | |||
| Input capacitance each pin | Cp | 500 | fF | 15 | |||
| Supply voltage 2.5 V mode | VDD25 | 2.375 | 2.5 | 2.625 | V | 15 | |
| Supply voltage 3.3 V mode | VDD33 | 3.135 | 3.3 | 3.465 | V | 15 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 15 | |
| LVDS differential input common mode supply voltage, 2.5 V supply | VICM | 1.1 | 1.6 | V | for 2.5 V | 15 | |
| LVDS differential input common mode supply voltage, 3.3 V supply | VICM | 1.1 | 2 | V | for 3.3 V | 15 | |
| LVDS differential input voltage | VID | 0.25 | 1 | V | 15 | ||
| LVDS output differential voltage | VOD | 0.25 | 0.3 | 0.4 | V | VOD parameter measured from 125 to 750 MHz | 15 |
| LVDS output common mode voltage | VCM | 1.1 | 1.25 | 1.375 | V | 15 | |
| Supply current, LVDS drivers loaded | Idd_load | 44 | mA | LVDS drivers - loaded (all outputs are active) | 15 | ||
| Maximum operating frequency | 1/tp | 750 | MHz | 16 | |||
| Input to output clock propagation delay | tpd | 0 | 1 | 2 | ns | 16 | |
| Output to output skew | tout2out | 50 | 100 | ps | 16 | ||
| Part to part output skew | tpart2part | 80 | 300 | ps | 16 | ||
| Output clock duty cycle degradation | tPWH/ tPWL | -5 | 0 | 5 | Percent | 16 | |
| LVDS output clock slew rate | rsl | 0.55 | V/ns | 16 | |||
| Junction to ambient thermal resistance, still air | ΘJA | 67.9 | °C/W | Still air | 19 | ||
| Junction to ambient thermal resistance, 1 m/s | ΘJA | 61.6 | °C/W | 1 m/s airflow | 19 | ||
| Junction to ambient thermal resistance, 2 m/s | ΘJA | 58.1 | °C/W | 2 m/s airflow | 19 | ||
| Junction to case thermal resistance | ΘJC | 44.1 | °C/W | Still air | 19 | ||
| Junction to board thermal resistance | ΘJB | 23.2 | °C/W | Still air | 19 | ||
| Maximum junction temperature | Tjmax | 125 | °C | 19 | |||
| Maximum ambient temperature | TA | 85 | °C | 19 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | ZL40212LDF1 16 Pin QFN Tape and Reel Matte Tin | 1 |
CAD (KiCad official)
- Symbol:
ZL40212LDG1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
zl40212ldg1-etched.step/zl40212ldg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zl40212ldg1.step/zl40212ldg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (21 pp, sha256
3b148187d55f02c3, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).