component
NCV20074DR2G
Public Made by Adomby adom
onsemi Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV20074DR2G
onsemi · Operational Amplifier · SOIC-14
NCV20074DR2G from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT 1 | output | Output of amplifier 1, rail-to-rail output stage per the datasheet; maximum output current is ±100 mA. |
| 2 | IN− 1 | input | Inverting input of amplifier 1; input current must be limited to ±10 mA and input common-mode range is VSS to VDD − 1.35 V. |
| 3 | IN+ 1 | input | Non-inverting input of amplifier 1; input common-mode range is VSS to VDD − 1.35 V and input current must be limited to ±10 mA. |
| 4 | VDD | power_in | Positive supply; single-supply operating range is 2.7 V to 36 V, and VDD − VSS must not exceed the 40 V absolute maximum. |
| 5 | IN+ 2 | input | Non-inverting input of amplifier 2; input common-mode range is VSS to VDD − 1.35 V and input current must be limited to ±10 mA. |
| 6 | IN− 2 | input | Inverting input of amplifier 2; input current must be limited to ±10 mA and input common-mode range is VSS to VDD − 1.35 V. |
| 7 | OUT 2 | output | Output of amplifier 2, rail-to-rail output stage per the datasheet; maximum output current is ±100 mA. |
| 8 | OUT 3 | output | Output of amplifier 3, rail-to-rail output stage per the datasheet; maximum output current is ±100 mA. |
| 9 | IN− 3 | input | Inverting input of amplifier 3; input current must be limited to ±10 mA and input common-mode range is VSS to VDD − 1.35 V. |
| 10 | IN+ 3 | input | Non-inverting input of amplifier 3; input common-mode range is VSS to VDD − 1.35 V and input current must be limited to ±10 mA. |
| 11 | VSS | power_in | Negative supply, the ground reference for single-supply operation; split-supply operation is ±1.35 V to ±18 V. |
| 12 | IN+ 4 | input | Non-inverting input of amplifier 4; input common-mode range is VSS to VDD − 1.35 V and input current must be limited to ±10 mA. |
| 13 | IN− 4 | input | Inverting input of amplifier 4; input current must be limited to ±10 mA and input common-mode range is VSS to VDD − 1.35 V. |
| 14 | OUT 4 | output | Output of amplifier 4, rail-to-rail output stage per the datasheet; maximum output current is ±100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (NCx20074) | VOS | -3 | 1.3 | 3 | mV | VS = 2.7 V; TA = 25°C | 6 |
| Input Offset Voltage (NCx20074), over temperature | VOS | 4 | mV | VS = 2.7 V; TA = −40°C to 125°C | 6 | ||
| Input Bias Current | IIB | 5 | 200 | pA | VS = 2.7 V; TA = 25°C | 6 | |
| Input Offset Current (NCx20074) | IOS | 2 | 75 | pA | VS = 2.7 V; TA = 25°C | 6 | |
| Common Mode Rejection Ratio | CMRR | 90 | 110 | dB | VS = 2.7 V; VCM = VSS + 0.2 V to VDD − 1.35 V; TA = 25°C | 6 | |
| Open Loop Voltage Gain | AVOL | 96 | 118 | dB | VS = 2.7 V; RL ≥ 10 k; TA = 25°C | 6 | |
| Output Voltage High | VOH | 0.006 | 0.15 | V | Voltage output swing from positive rail; VS = 2.7 V; TA = 25°C | 6 | |
| Output Voltage Low | VOL | 0.005 | 0.15 | V | Voltage output swing from negative rail; VS = 2.7 V; TA = 25°C | 6 | |
| Power Supply Rejection Ratio | PSRR | 114 | 135 | dB | No load; VS = 2.7 V; TA = 25°C | 7 | |
| Power Supply Quiescent Current (NCx20074), per channel | IDD | 405 | 525 | A | Per channel, no load; VS = 2.7 V; TA = 25°C | 7 | |
| Power Supply Quiescent Current (NCx20074), per channel, over temperature | IDD | 625 | A | Per channel, no load; VS = 2.7 V; TA = −40°C to 125°C | 7 | ||
| Input Offset Voltage (NCx20074) | VOS | -3 | 1.3 | 3 | mV | VS = 5 V; TA = 25°C | 7 |
| Input Offset Voltage (NCx20074), over temperature | VOS | 4 | mV | VS = 5 V; TA = −40°C to 125°C | 7 | ||
| Input Bias Current | IIB | 5 | 200 | pA | VS = 5 V; TA = 25°C | 7 | |
| Input Offset Current (NCx20074) | IOS | 2 | 75 | pA | VS = 5 V; TA = 25°C | 7 | |
| Common Mode Rejection Ratio | CMRR | 102 | 125 | dB | VS = 5 V; VCM = VSS + 0.2 V to VDD − 1.35 V; TA = 25°C | 8 | |
| Open Loop Voltage Gain | AVOL | 96 | 120 | dB | VS = 5 V; RL ≥ 10 k; TA = 25°C | 8 | |
| Output Voltage High | VOH | 0.013 | 0.2 | V | Voltage output swing from positive rail; VS = 5 V; TA = 25°C | 8 | |
| Output Voltage Low | VOL | 0.01 | 0.1 | V | Voltage output swing from negative rail; VS = 5 V; TA = 25°C | 8 | |
| Power Supply Rejection Ratio | PSRR | 114 | 135 | dB | No load; VS = 5 V; TA = 25°C | 8 | |
| Power Supply Quiescent Current (NCx20074), per channel | IDD | 410 | 530 | A | Per channel, no load; VS = 5 V; TA = 25°C | 8 | |
| Power Supply Quiescent Current (NCx20074), per channel, over temperature | IDD | 630 | A | Per channel, no load; VS = 5 V; TA = −40°C to 125°C | 8 | ||
| Input Offset Voltage (NCx20074) | VOS | -3 | 1.3 | 3 | mV | VS = 10 V; TA = 25°C | 9 |
| Input Offset Voltage (NCx20074), over temperature | VOS | 4 | mV | VS = 10 V; TA = −40°C to 125°C | 9 | ||
| Input Bias Current | IIB | 5 | 200 | pA | VS = 10 V; TA = 25°C | 9 | |
| Input Offset Current (NCx20074) | IOS | 2 | 75 | pA | VS = 10 V; TA = 25°C | 9 | |
| Common Mode Rejection Ratio | CMRR | 110 | 130 | dB | VS = 10 V; VCM = VSS + 0.2 V to VDD − 1.35 V; TA = 25°C | 9 | |
| Open Loop Voltage Gain | AVOL | 98 | 120 | dB | VS = 10 V; RL ≥ 10 k; TA = 25°C | 9 | |
| Output Voltage High | VOH | 0.023 | 0.08 | V | Voltage output swing from positive rail; VS = 10 V; TA = 25°C | 9 | |
| Output Voltage Low | VOL | 0.022 | 0.3 | V | Voltage output swing from negative rail; VS = 10 V; TA = 25°C | 9 | |
| Power Supply Rejection Ratio | PSRR | 114 | 135 | dB | No load; VS = 10 V; TA = 25°C | 10 | |
| Power Supply Quiescent Current (NCx20074), per channel | IDD | 416 | 540 | A | Per channel, no load; VS = 10 V; TA = 25°C | 10 | |
| Power Supply Quiescent Current (NCx20074), per channel, over temperature | IDD | 640 | A | Per channel, no load; VS = 10 V; TA = −40°C to 125°C | 10 | ||
| Input Offset Voltage (NCx20074) | VOS | -3 | 1.3 | 3 | mV | VS = 36 V; TA = 25°C | 10 |
| Input Offset Voltage (NCx20074), over temperature | VOS | 4 | mV | VS = 36 V; TA = −40°C to 125°C | 10 | ||
| Input Bias Current (NCx20074) | IIB | 5 | 200 | pA | VS = 36 V; TA = 25°C | 10 | |
| Input Offset Current (NCx20074) | IOS | 2 | 75 | pA | VS = 36 V; TA = 25°C | 10 | |
| Common Mode Rejection Ratio (NCx20074) | CMRR | 120 | 145 | dB | VS = 36 V; VCM = VSS + 0.2 V to VDD − 1.35 V; TA = 25°C | 11 | |
| Open Loop Voltage Gain | AVOL | 98 | 120 | dB | VS = 36 V; RL ≥ 10 k; TA = 25°C | 11 | |
| Output Voltage High (NCx20074) | VOH | 0.074 | 0.1 | V | Voltage output swing from positive rail; VS = 36 V; TA = 25°C | 11 | |
| Output Voltage Low | VOL | 0.065 | 0.3 | V | Voltage output swing from negative rail; VS = 36 V; TA = 25°C | 11 | |
| Power Supply Rejection Ratio | PSRR | 114 | 135 | dB | No load; VS = 36 V; TA = 25°C | 12 | |
| Power Supply Quiescent Current (NCx20074), per channel | IDD | 465 | 600 | A | Per channel, no load; VS = 36 V; TA = 25°C | 12 | |
| Power Supply Quiescent Current (NCx20074), per channel, over temperature | IDD | 700 | A | Per channel, no load; VS = 36 V; TA = −40°C to 125°C | 12 | ||
| Supply Voltage (VDD − VSS) | VS | 40 | V | 5 | |||
| Input Current | IIN | -10 | 10 | mA | 5 | ||
| Maximum Output Current | IO | -100 | 100 | mA | 5 | ||
| Continuous Total Power Dissipation | PD | 200 | mW | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 5 | ||
| Mounting Temperature | Tmount | 260 | °C | Infrared or Convection, 20 sec | 5 | ||
| ESD Capability, Human Body Model | 2000 | V | Human Body Model, JS-001 | 5 | |||
| ESD Capability, Machine Model (NCx20074) | 150 | V | Machine Model, NCx20072/NCx20074, JESD22-A115 | 5 | |||
| ESD Capability, Charged Device Model (NCx20074) | 1000 | V | Charged Device Model, NCx20074, C6 | 5 | |||
| Latch-Up Current | ILU | 100 | mA | 5 | |||
| Operating Supply Voltage (Single Supply) | VS | 2.7 | 36 | V | 5 | ||
| Operating Supply Voltage (Split Supply) | VS | 1.35 | 18 | V | Split supply; printed ±1.35 / ±18 V | 5 | |
| Ambient Temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-Ambient, SOIC-14, single layer board | JA | 142 | °C/W | Single layer board (Note 8), JEDEC51-3, 1.0 oz copper, 300 mm² | 5 | ||
| Junction-to-Ambient, SOIC-14, multi-layer board | JA | 101 | °C/W | Multi-layer board (Note 9), JEDEC51-7, 1.0 oz copper, 100 mm² | 5 |
CAD (KiCad official)
- Symbol:
NCV20074DR2G - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ncv20074dr2g-etched.step/ncv20074dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv20074dr2g.step/ncv20074dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (25 pp, sha256
dcd388200559389e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).