3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSI53340-B-GMR
SILICON LABS · Clock Buffers, Drivers · QFN-16-EP(3x3)
SI53340-B-GMR from SILICON LABS, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | CLK_SEL | input | LVCMOS mux input select: high selects CLK1, low selects CLK0, with an internal pull-down resistor. |
| 3 | CLK1 | input | Input clock 1. |
| 4 | CLK1b | input | Input clock 1 (complement); when CLK1 is driven by a single-ended LVCMOS input, connect CLK1b to an appropriate bias voltage (e.g., VDD/2). |
| 5 | VDD | power_in | Core and output voltage supply, bypass with a 1.0 µF capacitor placed as close to the VDD pin as possible. |
| 6 | CLK0 | input | Input clock 0. |
| 7 | CLK0b | input | Input clock 0 (complement); when CLK0 is driven by a single-ended LVCMOS input, connect CLK0b to an appropriate bias voltage (e.g., VDD/2). |
| 8 | NC | unconnected | No connect; do not connect this pin. |
| 9 | Q0 | output | Output clock 0. |
| 10 | Q0b | output | Output clock 0 (complement). |
| 11 | Q1 | output | Output clock 1. |
| 12 | Q1b | output | Output clock 1 (complement). |
| 13 | Q2 | output | Output clock 2. |
| 14 | Q2b | output | Output clock 2 (complement). |
| 15 | Q3 | output | Output clock 3. |
| 16 | Q3b | output | Output clock 3 (complement). |
| 17 | GND PAD | power_in | Exposed ground pad for power supply ground and thermal relief; it must be connected to GND to ensure device specifications are met. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 85 | °C | 15 | ||
| Supply Voltage Range (1.8 V) | VDD | 1.71 | 1.8 | 1.89 | V | LVDS | 15 |
| Supply Voltage Range (2.5 V) | VDD | 2.38 | 2.5 | 2.63 | V | LVDS | 15 |
| Supply Voltage Range (3.3 V) | VDD | 2.97 | 3.3 | 3.63 | V | LVDS | 15 |
| Differential Input Common Mode Voltage | VCM | 0.05 | V | VDD = 1.8 V, 2.5 V, or 3.3 V; TA = -40 to 85 °C | 15 | ||
| Differential Input Swing (peak-to-peak) | VIN | 0.2 | 2.2 | V | VDD = 1.8 V, 2.5 V, or 3.3 V; TA = -40 to 85 °C | 15 | |
| Input Capacitance | CIN | 5 | pF | CLK0 and CLK1 pins with respect to GND | 15 | ||
| Core Supply Current | IDD | 140 | mA | Si53340/41; ac-coupled termination at VDD/VDDOX = 3.3 V | 15 | ||
| Internal Pull-down Resistor | RDOWN | 25 | kΩ | CLK_SEL, OEAb, OEBb | 15 | ||
| Single-Ended Output Swing | VSE | 200 | 490 | mV | RL = 100 Ω across QN and QbN | 16 | |
| Output Common Mode Voltage (VDD = 2.5 or 3.3 V) | VCOM1 | 1.1 | 1.25 | 1.35 | V | VDD = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QbN | 16 |
| Output Common Mode Voltage (VDD = 1.8 V) | VCOM2 | 0.83 | 0.97 | 1.25 | V | VDD = 1.71 to 1.89 V, RL = 100 Ω across QN and QbN | 16 |
| Frequency | F | 1250 | MHz | Si53340/42/44 (min dc) | 16 | ||
| Duty Cycle (differential input clock) | DC | 47 | 50 | 53 | % | 50% input duty cycle; 20/80% TR/TF<10% of period; differential input clock | 16 |
| Duty Cycle (single-ended input clock) | DC | 45 | 50 | 55 | % | 50% input duty cycle; 20/80% TR/TF<10% of period; single-ended input clock | 16 |
| Minimum Input Clock Slew Rate (differential) | SRdiff | 0.75 | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 16 | ||
| Minimum Input Clock Slew Rate (single-ended) | SRse | 1 | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 16 | ||
| Output Rise/Fall Time | TR/TF | 350 | ps | 20-80% | 16 | ||
| Minimum Input Pulse Width | TW | 360 | ps | 16 | |||
| Propagation Delay | TPLH, TPHL | 650 | 850 | 1050 | ns | 16 | |
| Output-to-Output Skew | TSK | 50 | ps | outputs with identical configuration | 16 | ||
| Part-to-Part Skew | TPS | 125 | ps | 16 | |||
| Additive Jitter, 725 MHz, 3.3 V, differential input | 50 | 65 | fs rms | VDD 3.3 V; 725 MHz; VIN 0.15 V; slew 0.637 V/ns; LVDS output; 12 kHz to 20 MHz | 17 | ||
| Additive Jitter, 156.25 MHz, 3.3 V, differential input | 150 | 200 | fs rms | VDD 3.3 V; 156.25 MHz; VIN 0.5 V; slew 0.458 V/ns; LVDS output; 12 kHz to 20 MHz | 17 | ||
| Additive Jitter, 725 MHz, 2.5 V, differential input | 50 | 65 | fs rms | VDD 2.5 V; 725 MHz; VIN 0.15 V; slew 0.637 V/ns; LVDS output; 12 kHz to 20 MHz | 17 | ||
| Additive Jitter, 156.25 MHz, 2.5 V, differential input | 145 | 195 | fs rms | VDD 2.5 V; 156.25 MHz; VIN 0.5 V; slew 0.458 V/ns; LVDS output; 12 kHz to 20 MHz | 17 | ||
| Thermal Resistance, Junction to Ambient (16-QFN) | θJA | 57.6 | °C/W | Still air | 17 | ||
| Thermal Resistance, Junction to Case (16-QFN) | θJC | 41.5 | °C/W | Still air | 17 | ||
| Storage Temperature | TS | -55 | 150 | °C | 18 | ||
| Supply Voltage | VDD | -0.5 | 3.8 | V | 18 | ||
| Input Voltage | VIN | -0.5 | 3.8 | V | Max printed as VDD + 0.3 V | 18 | |
| Output Voltage | VOUT | 3.8 | V | Max printed as VDD + 0.3 V | 18 | ||
| ESD Sensitivity HBM | HBM | 2000 | V | HBM, 100 pF, 1.5 kΩ | 18 | ||
| ESD Sensitivity CDM | CDM | 500 | V | 18 | |||
| Peak Soldering Reflow Temperature | TPEAK | 260 | °C | Pb-Free; Solder reflow profile per JEDEC J-STD-020 | 18 | ||
| Maximum Junction Temperature | TJ | 125 | °C | 18 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020C specification for Small Body Components. | 29 |
CAD (KiCad official)
- Symbol:
SI53340-B-GMR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
si53340-b-gmr-etched.step/si53340-b-gmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si53340-b-gmr.step/si53340-b-gmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SILICON LABS datasheet (38 pp, sha256
379774ad7383b5b6, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).