3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownVO0601T
Vishay Intertech · Logic Output Optoisolators · SOIC-8
VO0601T from Vishay Intertech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 2 | A | input | Input LED anode; average forward current is rated at 20 mA maximum for the single channel device. |
| 3 | C | passive | Input LED cathode; reverse input voltage is rated at 5 V maximum. |
| 4 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 5 | GND | power_in | Ground reference for the detector side; a 0.1 µF bypass capacitor between pin 5 and pin 8 is recommended. |
| 6 | VO | output | Open drain NMOS detector output with output current rated at 50 mA maximum and output voltage at 7 V maximum; an external pull-up resistor of 330 Ω to 4 kΩ is required. |
| 7 | VE | input | Enable input (single channel only) that strobes the detector; logic low enable voltage is 0.8 V maximum and logic high enable voltage is 2 V minimum. |
| 8 | VCC | power_in | Supply voltage with recommended range of 4.5 V to 5.5 V and absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | Tamb | -40 | 100 | °C | 2 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 2 | ||
| Input current low level | IFL | 0 | 250 | μA | 2 | ||
| Input current high level | IFH | 5 | 15 | mA | 2 | ||
| Logic low enable voltage | VEL | 0 | 0.8 | V | 2 | ||
| Average forward current (single channel) | IF | 20 | mA | 2 | |||
| Reverse input voltage | VR | 5 | V | 2 | |||
| Enable input current (single channel) | IE | 5 | mA | 2 | |||
| Surge current | IFSM | 200 | mA | t = 100 μs | 2 | ||
| Output power dissipation (single channel), input | Pdiss | 35 | mW | 2 | |||
| Supply voltage | VCC | 7 | V | 1 min maximum | 2 | ||
| Output current | IO | 50 | mA | 2 | |||
| Output voltage | VO | 7 | V | 2 | |||
| Output power dissipation (single channel) | Pdiss | 85 | mW | 2 | |||
| Isolation test voltage | VISO | 4000 | VRMS | t = 1 s | 2 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 2 | ||
| Operating temperature | Tamb | -40 | 100 | °C | 2 | ||
| Lead solder temperature | 260 | °C | for 10 s | 2 | |||
| Solder reflow temperature | 260 | °C | for 1 min | 2 | |||
| Input forward voltage | VF | 1.1 | 1.4 | 1.7 | V | IF = 10 mA | 3 |
| Reverse current | IR | 0.01 | 10 | μA | VR = 5 V | 3 | |
| High level supply current (single channel) | ICCH | 4.1 | 7 | mA | VE = 0.5 V, IF = 0 mA | 3 | |
| High level supply current (single channel) | ICCH | 3.3 | 6 | mA | VE = VCC, IF = 0 mA | 3 | |
| Low level supply current (single channel) | ICCL | 4 | 7 | mA | VE = 0.5 V, IF = 10 mA | 3 | |
| Low level supply current (single channel) | ICCL | 3.3 | 6 | mA | VE = VCC, IF = 10 mA | 3 | |
| High level output current | IOH | 0.002 | 1 | μA | VE = 2 V, VO = 5.5 V, IF = 250 μA | 3 | |
| Low level output voltage | VOL | 0.2 | 0.6 | V | VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA | 3 | |
| Input threshold current | ITH | 2.4 | 5 | mA | VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA | 3 | |
| High level enable voltage | VEH | 2 | V | 3 | |||
| Low level enable voltage | VEL | 0.8 | V | 3 | |||
| Propagation delay time to high output level | tPLH | 20 | 48 | 100 | ns | RL = 350 Ω, CL = 15 pF | 3 |
| Propagation delay time to low output level | tPHL | 25 | 50 | 100 | ns | RL = 350 Ω, CL = 15 pF | 3 |
| Pulse width distortion | /tPHL - tPLH/ | 2.9 | 35 | ns | RL = 350 Ω, CL = 15 pF | 3 | |
| Propagation delay skew | tPSK | 8 | 40 | ns | RL = 350 Ω, CL = 15 pF | 3 | |
| Common mode transient immunity (high) | /CMH/ | 5000 | 10000 | V/μs | /VCM/ = 50 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C | 5 | |
| Common mode transient immunity (low) | /CML/ | 5000 | 10000 | V/μs | /VCM/ = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C | 5 | |
| Input capacitance | CI | 55 | pF | f = 1 MHz, VF = 0 V | 3 | ||
| Output rise time (10 to 90 %) | tr | 23 | ns | RL = 350 Ω, CL = 15 pF | 3 | ||
| Output fall time (90 to 10 %) | tf | 7 | ns | RL = 350 Ω, CL = 15 pF | 3 | ||
| Propagation delay time of enable from VEH to VEL | tELH | 12 | ns | RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V | 3 | ||
| Propagation delay time of enable from VEL to VEH | tEHL | 11 | ns | RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Pure tin leads • Guaranteed AC and DC performance over | 1 |
CAD (KiCad official)
- Symbol:
VO0601T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
vo0601t-etched.step/vo0601t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vo0601t.step/vo0601t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (10 pp, sha256
0bfd8adb77bd5b94, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).