Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP3423-E

Microchip Tech · Analog To Digital Converters (ADCs) · MSOP-10

MCP3423-E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH1+ input Positive differential analog input pin of channel 1; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage.
2 CH1- input Negative differential analog input pin of channel 1, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V.
3 VSS power_in Ground pin and current return path of the device, which must be connected to a low-impedance ground plane.
4 CH2+ input Positive differential analog input pin of channel 2; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage.
5 CH2- input Negative differential analog input pin of channel 2, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V.
6 VDD power_in Positive supply voltage pin, which must be maintained in the 2.7V to 5.5V range for specified operation.
7 SDA bidirectional Bidirectional serial data pin of the I2C interface, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode.
8 SCL input Serial clock pin of the I2C interface that accepts only external clocks, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode.
9 Adr0 input I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr1.
10 Adr1 input I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr0.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Data Converters
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution (12 bits) 12 bits DR = 240 SPS 5
Resolution (14 bits) 14 bits DR = 60 SPS 5
Resolution (16 bits) 16 bits DR = 15 SPS 5
Resolution (18 bits) 18 bits DR = 3.75 SPS 5
Data Rate DR 176 240 328 SPS 12 bits mode 5
Data Rate DR 44 60 82 SPS 14 bits mode 5
Data Rate DR 11 15 20.5 SPS 16 bits mode 5
Data Rate DR 2.75 3.75 5.1 SPS 18 bits mode 5
Integral Non-Linearity INL 10 35 ppm of FSR DR = 3.75 SPS, FSR = Full Scale Range (Note 5) 5
Gain Error 0.05 0.35 % PGA = 1, DR = 3.75 SPS 5
Offset Error VOS 15 55 µV Tested at PGA = 1, DR = 3.75 SPS 6
Voltage Range VDD 2.7 5.5 V 6
Supply Current during Conversion IDDA 145 180 µA VDD = 5.0V 6
Supply Current during Standby Mode IDDS 0.3 1 µA VDD = 5.0V 6
Low level output voltage VOL 0.4 V IOL = 3 mA 6
Supply Current when I2C bus line is active IDDB 10 µA Device is in standby mode while I2C bus is active 6
Input Leakage Current (high) IILH 1 µA VIH = 5.5V 6
Input Leakage Current (low) IILL -1 µA VIL = GND 6
Pin capacitance CPIN 4 10 pF 6
I2C Bus Capacitance Cb 400 pF 6
Specified Temperature Range TA -40 85 °C 7
Operating Temperature Range TA -40 125 °C 7
Storage Temperature Range TA -65 150 °C 7
Thermal Resistance, 10L-MSOP θJA 202 °C/W 7
VDD Supply Voltage VDD 7 V 5
Current at Input Pins -2 2 mA 5
Current at Output and Supply Pins -10 10 mA 5
Ambient Temp. with power applied -55 125 °C 5
Maximum Junction Temperature (TJ) TJ 150 °C 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SL = Plastic SOIC (150 mil Body), 14-lead SN = Plastic SOIC (3.90mm Body), 8-lead, 55

CAD (KiCad official)

  • Symbol: MCP3423-E
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp3423-e-etched.step / mcp3423-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3423-e.step / mcp3423-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 3850891a8c0460ab, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF