Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS71733DCKR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5

TPS71733DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input to the device; a 0.1-μF to 1-μF capacitor is recommended for IN better performance.
2 GND power_in Ground
3 EN input Driving the enable pin (EN) above VEN(high) turns on the regulator; driving this pin below VEN(low) puts the regulator into standby mode, thereby disabling the output and reducing operating current.
4 NR passive Fixed voltage versions only; the noise reduction capacitor filters the noise generated by the internal band gap, thus lowering output noise.
5 OUT power_out This pin is the regulated output voltage; a minimum capacitance of 1 μF is required for stability from this pin to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2.5 6.5 V 4
Output voltage range (TPS717xx fixed versions) VOUT 0.9 5 V TPS717xx fixed-voltage versions 5
Output accuracy (nominal) -2.5 2.5 mV Nominal TJ = 25°C 5
Output accuracy (VOUT ≥ 1.0 V) -3 3 % Over VIN, IOUT, temperature; VOUT + 0.5 V ≤ VIN ≤ 6.5 V; 0 mA ≤ IOUT ≤ 150 mA; VOUT ≥ 1.0 V 5
Dropout voltage VDO 170 300 mV IOUT = 150 mA (VIN = VOUT(nom) – 0.1 V) 5
Output current limit (fixed output) ILIM (fixed) 200 325 575 mA VOUT = 0.9 × VOUT(nom) 5
Ground pin current IGND 45 80 μA IOUT = 0.1 mA 5
Shutdown current (IGND) ISHDN 0.2 1.5 μA VEN ≤ 0.4 V, 2.5 V ≤ VIN < 4.5 V 5
Enable high (enabled), VIN ≤ 5.5 V VEN(high) 1.2 6.5 V VIN ≤ 5.5 V (max = VIN + 0.3 or 6.5 V, whichever is smaller) 5
Enable high (enabled), 5.5 V < VIN ≤ 6.5 V VEN(high) 1.25 6.5 V 5.5 V < VIN ≤ 6.5 V 5
Enable low (shutdown) VEN(low) 0 0.4 V 5
Enable pin current, enabled IEN(high) 0.02 1 μA EN = 6.5 V 5
Undervoltage lockout (rising) UVLO 2.41 2.45 2.49 V VIN rising 5
Input voltage (abs max) VIN -0.3 7 V All voltages with respect to GND 4
Voltage VNR (NR pin) VNR -0.3 3.6 V All voltages with respect to GND 4
Enable voltage (abs max) VEN -0.3 V Max = VIN + 0.3 V or 7 V, whichever is greater; all voltages with respect to GND 4
Output voltage (abs max) VOUT -0.3 7 V All voltages with respect to GND 4
Operating junction temperature (abs max) TJ -55 150 °C Operating junction temperature range 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN 2.5 6.5 V Recommended operating 4
Output voltage VOUT 0.9 5 V Recommended operating 4
Output current IOUT 0 150 mA Recommended operating 4
Enable voltage VEN 0 V Max = VIN 4
Output capacitor COUT 1 100 µF Recommended operating 4
Junction temperature (operating) TJ -40 125 °C Recommended operating junction temperature range 4
Junction-to-ambient thermal resistance (DCK) RθJA 279.2 °C/W DCK (5-pin SC70) package 4
Junction-to-case (top) thermal resistance (DCK) RθJC(top) 57.5 °C/W DCK (5-pin SC70) package 4
Junction-to-board thermal resistance (DCK) RθJB 74.1 °C/W DCK (5-pin SC70) package 4
Junction-to-top characterization parameter (DCK) ψJT 0.8 °C/W DCK (5-pin SC70) package 4
Junction-to-board characterization parameter (DCK) ψJB 73.1 °C/W DCK (5-pin SC70) package 4

CAD (KiCad official)

  • Symbol: TPS71733DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tps71733dckr-etched.step / tps71733dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps71733dckr.step / tps71733dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 9d6a9da698418596, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF