component
TL331IDBVR
Public Made by Adomby adom
Texas Instruments Comparators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTL331IDBVR
Texas Instruments · Comparators · SOT-23-5
TL331IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting comparator input. Common-mode input voltage range includes ground; input bias current typically 25 nA. |
| 2 | GND | power_in | Ground / negative supply reference. Connect to system ground (or V- in split-supply configurations). |
| 3 | IN- | input | Inverting comparator input. Common-mode input voltage range includes ground; input bias current typically 25 nA. |
| 4 | OUT | output | Open-collector comparator output. Requires an external pull-up resistor to VCC (or another rail up to 36 V). Sinks up to ~6 mA typical; output low when IN+ < IN-. |
| 5 | VCC | power_in | Positive supply input. Single-supply range 2 V to 36 V, or split-supply ±1 V to ±18 V. Supply current typically 300 uA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TL331IDBVRTL331IDBVT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 5 | mV | VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min), TA = 25°C | 5 | |
| Input offset voltage | VIO | 9 | mV | VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min), TA = Full range (–40°C to 85°C) | 5 | ||
| Input offset current | IIO | 5 | 50 | nA | VO = 1.4 V, TA = 25°C | 5 | |
| Input offset current | IIO | 250 | nA | VO = 1.4 V, TA = Full range (–40°C to 85°C) | 5 | ||
| Input bias current | IIB | -25 | -250 | nA | VO = 1.4 V, TA = 25°C | 5 | |
| Input bias current | IIB | -400 | nA | VO = 1.4 V, TA = Full range (–40°C to 85°C) | 5 | ||
| Common-mode input voltage range | VICR | 0 | V | TA = Full range; upper limit printed as VCC – 1.5 V | 5 | ||
| Large-signal differential voltage amplification | AVD | 50 | 200 | V/mV | VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC, TA = 25°C | 5 | |
| High-level output current | IOH | 0.1 | 50 | nA | VOH = 5 V, VID = 1 V, TA = 25°C | 5 | |
| High-level output current | IOH | 1 | μA | VOH = 30 V, VID = 1 V, TA = Full range (–40°C to 85°C) | 5 | ||
| Low-level output voltage | VOL | 150 | 400 | mV | IOL = 4 mA, VID = –1 V, TA = 25°C | 5 | |
| Low-level output voltage | VOL | 700 | mV | IOL = 4 mA, VID = –1 V, TA = Full range (–40°C to 85°C) | 5 | ||
| Low-level output current | IOL | 6 | mA | VOL = 1.5 V, VID = –1 V, TA = 25°C | 5 | ||
| Supply current | ICC | 0.4 | 0.7 | mA | RL = ∞, VCC = 5 V, TA = 25°C | 5 | |
| Supply voltage | VCC | 0 | 36 | V | All voltage values except differential are with respect to network ground | 4 | |
| Differential input voltage | VID | -36 | 36 | V | Differential voltages at IN+ with respect to IN– | 4 | |
| Input voltage range (either input) | VI | -0.3 | 36 | V | Either input | 4 | |
| Output voltage | VO | 0 | 36 | V | 4 | ||
| Output current | IO | 0 | 20 | mA | 4 | ||
| Operating virtual junction temperature | TJ | -40 | 150 | °C | Over operating free-air temperature range | 4 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2 | 36 | V | Over operating free-air temperature range | 4 | |
| Junction temperature | TJ | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 218.3 | °C/W | DBV package, 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 87.3 | °C/W | DBV package, 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 44.9 | °C/W | DBV package, 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 4.3 | °C/W | DBV package, 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 44.1 | °C/W | DBV package, 5 pins | 4 |
CAD (KiCad official)
- Symbol:
TL331IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tl331idbvr-etched.step/tl331idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl331idbvr.step/tl331idbvr.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tl331idbvr.step |
85 KB | You want the bare part, or you mark your own boards. |
tl331idbvr-etched.step |
1.7 MB | You want the part with TL331IDBVR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 440 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
b28fe7231d4e36b1, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).