3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F67J11-I
Microchip Tech · MICROCHIP · TQFP-64(10x10)
PIC18F67J11-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/PMWR/P2C | bidirectional | Digital I/O with Parallel Master Port write strobe and ECCP2 PWM output C, with Schmitt Trigger input. |
| 2 | RE0/PMRD/P2D | bidirectional | Digital I/O with Parallel Master Port read strobe and ECCP2 PWM output D, with Schmitt Trigger input. |
| 3 | RG0/PMA8/ECCP3/P3A | bidirectional | Digital I/O with Parallel Master Port address, ECCP3 capture/compare/PWM and ECCP3 PWM output A. |
| 4 | RG1/PMA7/TX2/CK2 | bidirectional | Digital I/O with Parallel Master Port address and EUSART2 asynchronous transmit or synchronous clock. |
| 5 | RG2/PMA6/RX2/DT2 | bidirectional | Digital I/O with Parallel Master Port address and EUSART2 asynchronous receive or synchronous data. |
| 6 | RG3/PMCS1/CCP4/P3D | bidirectional | Digital I/O with Parallel Master Port Chip Select 1, CCP4 capture/compare/PWM and ECCP3 PWM output D. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | RG4/PMCS2/CCP5/P1D | bidirectional | Digital I/O with Parallel Master Port Chip Select 2, CCP5 capture/compare/PWM and ECCP1 PWM output D. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic power or external filter capacitor connection, with a 10 µF capacitor to ground when the regulator is enabled. |
| 11 | RF7/SS1 | bidirectional | Digital I/O with SPI slave select input for MSSP1. |
| 12 | RF6/AN11/C1INA | bidirectional | Digital I/O with Analog Input 11 and Comparator 1 Input A. |
| 13 | RF5/AN10/C1INB/CVREF | bidirectional | Digital input with Analog Input 10, Comparator 1 Input B, and comparator reference voltage output CVREF. |
| 14 | RF4/AN9/C2INA | bidirectional | Digital input with Analog Input 9 and Comparator 2 Input A. |
| 15 | RF3/AN8/C2INB | bidirectional | Digital input with Analog Input 8 and Comparator 2 Input B. |
| 16 | RF2/PMA5/AN7/C1OUT | bidirectional | Digital I/O with Parallel Master Port address, Analog Input 7 and Comparator 1 output. |
| 17 | RF1/AN6/C2OUT | bidirectional | Digital I/O with Analog Input 6 and Comparator 2 output. |
| 18 | ENVREG | input | Enable for on-chip voltage regulator; tie to VDD to enable the regulator or to ground to disable it. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O with Analog Input 3 and A/D reference voltage (high) input. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O with Analog Input 2 and A/D reference voltage (low) input. |
| 23 | RA1/AN1 | bidirectional | Digital I/O with Analog Input 1. |
| 24 | RA0/AN0 | bidirectional | Digital I/O with Analog Input 0. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 27 | RA5/AN4 | bidirectional | Digital I/O with Analog Input 4. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O with Timer0 external clock input, using a Schmitt Trigger input. |
| 29 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O with Timer1 oscillator input, ECCP2 capture/compare/PWM and ECCP2 PWM output A (default assignment when CCP2MX is set). |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O with EUSART1 asynchronous transmit or synchronous clock. |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O with EUSART1 asynchronous receive or synchronous data. |
| 33 | RC2/ECCP1/P1A | bidirectional | Digital I/O with ECCP1 capture/compare/PWM and ECCP1 PWM output A. |
| 34 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with MSSP1 SPI clock input/output or I2C clock. |
| 35 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with MSSP1 SPI data input or I2C data I/O. |
| 36 | RC5/SDO1 | bidirectional | Digital I/O with MSSP1 SPI data output. |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming data pin. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input in external oscillator modes, or general purpose I/O RA7 in INTIO2 and INTPLL2 modes. |
| 40 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or FOSC/4 clock output in external oscillator modes, or general purpose I/O RA6 in INTIO2 and INTPLL2 modes. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming clock pin. |
| 43 | RB5/KBI1/PMA0 | bidirectional | Digital I/O with interrupt-on-change and Parallel Master Port address. |
| 44 | RB4/KBI0/PMA1 | bidirectional | Digital I/O with interrupt-on-change and Parallel Master Port address. |
| 45 | RB3/INT3/PMA2 | bidirectional | Digital I/O with External Interrupt 3 and Parallel Master Port address. |
| 46 | RB2/INT2/PMA3 | bidirectional | Digital I/O with External Interrupt 2 and Parallel Master Port address. |
| 47 | RB1/INT1/PMA4 | bidirectional | Digital I/O with External Interrupt 1 and Parallel Master Port address. |
| 48 | RB0/FLT0/INT0 | bidirectional | Digital I/O with External Interrupt 0 and ECCP1/2/3 Fault input. |
| 49 | RD7/PMD7/SS2 | bidirectional | Digital I/O with Parallel Master Port data and SPI slave select input for MSSP2. |
| 50 | RD6/PMD6/SCK2/SCL2 | bidirectional | Digital I/O with Parallel Master Port data and MSSP2 SPI clock or I2C clock. |
| 51 | RD5/PMD5/SDI2/SDA2 | bidirectional | Digital I/O with Parallel Master Port data and MSSP2 SPI data input or I2C data. |
| 52 | RD4/PMD4/SDO2 | bidirectional | Digital I/O with Parallel Master Port data and MSSP2 SPI data output. |
| 53 | RD3/PMD3 | bidirectional | Digital I/O with Parallel Master Port data. |
| 54 | RD2/PMD2 | bidirectional | Digital I/O with Parallel Master Port data. |
| 55 | RD1/PMD1 | bidirectional | Digital I/O with Parallel Master Port data. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 58 | RD0/PMD0 | bidirectional | Digital I/O with Parallel Master Port data. |
| 59 | RE7/PMA9/ECCP2/P2A | bidirectional | Digital I/O with Parallel Master Port address, ECCP2 capture/compare/PWM and ECCP2 PWM output A (alternate assignment). |
| 60 | RE6/PMA10/P1B | bidirectional | Digital I/O with Parallel Master Port address and ECCP1 PWM output B. |
| 61 | RE5/PMA11/P1C | bidirectional | Digital I/O with Parallel Master Port address and ECCP1 PWM output C. |
| 62 | RE4/PMA12/P3B | bidirectional | Digital I/O with Parallel Master Port address and ECCP3 PWM output B. |
| 63 | RE3/PMA13/P3C/REFO | bidirectional | Digital I/O with Parallel Master Port address, ECCP3 PWM output C and reference clock output REFO. |
| 64 | RE2/PMBE/P2B | bidirectional | Digital I/O with Parallel Master Port byte enable and ECCP2 PWM output B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 2 | 3.6 | V | 1 |
CAD (KiCad official)
- Symbol:
PIC18F67J11-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f67j11-i-etched.step/pic18f67j11-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f67j11-i.step/pic18f67j11-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (466 pp, sha256
df7906969e6e3feb, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).