3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPT485N-SO1R
3PEAK · RS-485 / RS-422 ICs · SO-8
TPT485N-SO1R from 3PEAK, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver data output, which is high for a valid bus-high (VID > VIT+) and low for a valid bus-low (VID < VIT-) in normal mode, and high-impedance when the receiver is disabled. |
| 2 | DE | input | Driver Enable, active high; the driver is disabled when DE is low or open. |
| 3 | /RE | input | Receiver Enable, active low; the receiver output is high-impedance when /RE is high or open. |
| 4 | D | input | Driver data input; when the driver is enabled (DE high), D high drives A high and B low in normal mode, and D low drives A low and B high. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Bus I/O port A, rated for a bus common-mode voltage range of -7 V to +12 V and protected to ±18 kV HBM and ±12 kV IEC61000-4-2 contact discharge. |
| 7 | B | bidirectional | Bus I/O port B, rated for a bus common-mode voltage range of -7 V to +12 V and protected to ±18 kV HBM and ±12 kV IEC61000-4-2 contact discharge. |
| 8 | VCC | power_in | Power supply, specified from 3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SO-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver differential-output voltage magnitude /VOD/ (RL=60 Ω, -7V≤Vtest≤12V) | /VOD/ | 1.5 | 3.3 | V | RL = 60 Ω, -7V≤Vtest≤12V, See Figure 1B | 5 | |
| Driver differential-output voltage magnitude /VOD/ (RS-485 load 54 Ω) | /VOD/ | 1.65 | 3.3 | V | RL = 54 Ω (RS-485), See Figure 1A | 5 | |
| Driver differential-output voltage magnitude /VOD/ (RS-485 load 100 Ω) | /VOD/ | 2 | 4.4 | V | RL = 100 Ω (RS-485) | 5 | |
| Change in magnitude of driver differential-output voltage | ⊿/VOD/ | -50 | 50 | mV | RL = 54 Ω, CL=50pF, See Figure 1A | 5 | |
| Steady-state common-mode output voltage (center of two 27-Ω load resistors) | VOC(SS) | 1 | 3 | V | Center of two 27-Ω load resistors, See Figure 1A | 5 | |
| Change in differential driver common-mode output voltage | ⊿VOC | -50 | 50 | mV | 5 | ||
| Peak-to-peak driver common-mode output voltage | VOC(PP) | 600 | mV | 5 | |||
| Positive-going receiver differential-input voltage threshold | VIT+ | 100 | mV | 5 | |||
| Negative-going receiver differential-input voltage threshold | VIT- | -100 | mV | 5 | |||
| Receiver differential-input voltage threshold hysteresis (VIT+, VIT-) | VHYS | 30 | mV | 5 | |||
| Logic input high voltage DI, DE, RE | VIH | 2 | V | DI, DE, RE | 5 | ||
| Logic input low voltage DI, DE, RE | VIL | 0.8 | V | DI, DE, RE | 5 | ||
| Receiver high-level output voltage | VOH | 4 | V | IOH = -8 mA | 5 | ||
| Receiver low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 8 mA | 5 | |
| Driver input, driver enable and receiver enable input current | II | -5 | 5 | μA | 5 | ||
| Receiver high-impedance output current | IOZ | 1 | μA | VO = 0 V or VCC, /RE at VCC | 5 | ||
| Driver short-circuit output current | /IOS/ | 95 | mA | /IOS/ with VA or VB from -7 to +12 V | 5 | ||
| Bus input current (driver disabled), VI = 12 V | II | 55 | μA | VCC = 4.5 to 5.5 V or VCC = 0 V, DE at 0 V, VI = 12 V | 5 | ||
| Bus input current (driver disabled), VI = -7 V | II | -90 | 85 | μA | VCC = 4.5 to 5.5 V or VCC = 0 V, DE at 0 V, VI = -7 V | 5 | |
| Supply current (quiescent), driver and receiver enabled | ICC | 755 | 950 | μA | DE = VCC, /RE = GND, No LOAD | 5 | |
| Supply current (quiescent), driver enabled, receiver disabled | ICC | 560 | 750 | μA | DE = VCC, /RE = VCC, No LOAD | 5 | |
| Supply current (quiescent), driver disabled, receiver enabled | ICC | 550 | 700 | μA | DE = GND, /RE = VCC, No LOAD | 5 | |
| Supply current (quiescent), driver and receiver disabled | ICC | 0.1 | 2 | μA | DE = GND, /RE = VCC, D = Vcc, No LOAD | 5 | |
| Driver differential-output rise and fall times | tr, tf | 300 | 500 | ns | RL = 54 Ω, CL=50pF, See Figure 2 | 6 | |
| Driver propagation delay | tPHL, tPLH | 260 | 400 | ns | 6 | ||
| Driver pulse skew /tPHL, tPLH/ | tSK(P) | -10 | 2 | 10 | ns | 6 | |
| Driver disable time | tPHZ, tPLZ | 50 | 100 | ns | See Figure 3 | 6 | |
| Driver enable time, RE = 0 | tPZH, tPZL | 200 | 400 | ns | RE = 0 | 6 | |
| Driver enable time, RE = VCC | tPZH, tPZL | 2200 | 4000 | ns | RE = VCC | 6 | |
| Receiver output rise and fall times | tr, tf | 6 | 10 | 13 | ns | CL = 15 pF, See Figure 5 | 6 |
| Receiver propagation delay time | tPHL, tPLH | 90 | 110 | ns | 6 | ||
| Receiver pulse skew /tPHL, tPLH/ | tSK(P) | -11 | 11 | ns | 6 | ||
| Receiver disable time | tPHZ, tPLZ | 8 | 13 | ns | 6 | ||
| Receiver enable time, DE = VCC | tPZL(1), tPZH(1), tPZL(2), tPZH(2) | 100 | 150 | ns | DE = VCC, See Figure 6 | 6 | |
| Receiver enable time, DE = 0 | tPZL(1), tPZH(1), tPZL(2), tPZH(2) | 2100 | 4000 | ns | DE = 0, See Figure 6 | 6 | |
| Bus failsafe time | tFS | 40 | ms | Driver disabled, See Figure 7 | 6 | ||
| VDD to GND | VDD | -0.3 | 7 | V | 4 | ||
| Input voltages DI, DE, RE (upper limit VCC + 0.3 V) | -0.3 | V | 4 | ||||
| Input/output voltages A, B | -15 | 15 | V | 4 | |||
| A, B transient pulse through 100 Ω | -100 | 100 | V | Through 100 Ω, Note 1: tested per TIA/EIA-485-A Section 4.2.6 (±100 V for 15 μs at 1% duty cycle) | 4 | ||
| Output voltage R (upper limit VCC + 0.3 V) | -0.3 | V | 4 | ||||
| ESD contact discharge, bus pin (IEC 61000-4-2) | 12 | kV | Per IEC 61000-4-2, bus pin | 4 | |||
| ESD HBM, bus pin | 18 | kV | Per ANSI/ESDA/JEDEC JS-001, bus pin | 4 | |||
| ESD HBM, all pins except bus pin | 4 | kV | Per ANSI/ESDA/JEDEC JS-001, all pins except bus pin | 4 | |||
| ESD CDM | 1500 | V | Per ANSI/ESDA/JEDEC JS-002 | 4 | |||
| Maximum junction temperature (plastic package) | 150 | °C | 4 | ||||
| Maximum storage temperature range | -65 | 150 | °C | 4 | |||
| Supply voltage | 3 | 5.5 | V | 4 | |||
| Temperature range | -40 | 125 | °C | 4 | |||
| Bus pin common-mode voltage range | -7 | 12 | V | 4 | |||
| Thermal resistance, junction-to-ambient ΘJA (8-pin SOIC) | ΘJA | 136 | °C/W | 8-Pin SOIC package, typical | 4 |
CAD (KiCad official)
- Symbol:
TPT485N-SO1R - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tpt485n-so1r-etched.step/tpt485n-so1r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpt485n-so1r.step/tpt485n-so1r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (9 pp, sha256
5922d877114f5793, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).